A temporary refuge is a place or shelter where personnel will be adequately protected from relevant hazards while they remain on an installation following a major incident, and from where they will have access to the communications, monitoring and control equipment necessary to ensure their personal safety, and from where, if necessary, safe and complete evacuation can be affected. The Temporary Refuge will switch HVAC from fresh air mode to full recirculation mode in case of potential toxic gas intrusion, fire damper closure activated by external gas detectors. The TR will also provide minimum breathable air concentration by air cylinders enough for above 1 hour or more. The Temporary Refuges is located to ensure the safety of personnel during the period of time that covers the call to muster until an incident has been investigated and controlled, or successful evacuation of the installation has been completed. The TR shelter have adequate medical and welfare facilities, as well as emergency communications. The TR shelter is designed for external installation with a supply duct to the TR area interior. The TR shelter control panel is designed to be installed internally within the TR area. When the TR shelter is operational, the shelter is designed as a fail-safe system, i.e. should the shelter sustain damage or an air seal leaks, then clean air will leak out of the shelter rather than contaminated air being drawn in.
When you're rolling smoother, you're rolling faster. And regardless of if you're on the cobbles of Northern France or the chip and seal of your hometown, you'll benefit immensely from the Roubaix Comp. The super-light frame has been constructed from our FACT 10r carbon fiber. Its stiffness levels are also off the charts, and compared to the SL4 iteration of yesteryear, you'll experience a whole new, faster, and more efficient geometry. Through some engineering sorcery, however, we've managed to keep the same fit, feel, and position that we've all come to love from the SL4, and kept it consistent throughout the size-range due to our Rider-First Engineered construction. Of course, you're probably thinking, "get on to the suspension thing up front." We call it Future Shock, and essentially, it's a piston in the head tube with 20mm of travel. We developed this technology in partnership with McLaren Applied Technologies, and the result of this are a host of drastic performance improvements, namely in the vertical compliance department. Without giving a physics lecture, we found that focusing on vertical compliance, instead of fork splay, meant that we could improve smoothness, speed, and comfort in one fell swoop. And of all the bikes that we've tested with our Rolling Efficiency Model, the new Roubaix outperforms anything on the market.
Offering long reach with an advanced feature-set and optical design, the M.Zuiko Digital ED 40-150mm f/2.8 PRO from Olympus is a versatile 80-300mm equivalent telephoto zoom for Micro Four Thirds mirrorless cameras. As part of the PRO series of advanced lenses, this zoom distinguishes itself with a bright f/2.8 constant maximum aperture for consistent illumination throughout the zoom range to suit working in a variety of lighting conditions. Its optical design makes use of a series of aspherical and low dispersion glass elements to suppress chromatic and spherical aberrations for notable sharpness and clarity, and a ZERO coating is also used to reduce flare and ghosting for high contrast, color-accurate imaging. Complementing the optics, a dual VCM autofocus system offers fast and near-silent focusing performance to suit both stills and movie recording applications. A manual focus clutch permits quick switching between AF and MF, and a programmable L-Fn button avails lens-based control over shooting settings. The lens is also weather-sealed for working in trying conditions, and a removable rotating tripod collar is included for improved balance and support when working atop a tripod or monopod.
Prized for event, portraiture, and sports shooting, the Canon EF, Nikon F and Sigma SA mount Sigma 70-200mm f/2.8 DG OS HSM Sports Lens is a flexible telephoto zoom characterized by its bright and sophisticated design. The fast constant f/2.8 maximum aperture excels in difficult lighting conditions and also offers increased control over depth of field for isolating subjects. In regard to the optical layout, an impressive 10 low dispersion elements are used to greatly reduce chromatic aberrations and color fringing for improved clarity and color accuracy. A Super Multi-Layer Coating is also featured, and helps to suppress ghosting and flare when working in strong lighting conditions. Complementing the optics is an Intelligent OS system, which minimizes the appearance of camera shake for sharper results when shooting handheld. A Hyper Sonic Motor is also used to provide quick and quiet autofocus performance along with full-time manual focus override. The physical design of the lens also incorporates several seals to guard against dust and moisture, and a water- and oil-repellent coating has been applied to the exposed elements to prevent moisture, fingerprints, or smudges from sticking to the surface. Additionally, a fixed rotating tripod collar is featured, and has a removable Arca-type compatible foot for wide compatibility with different tripod or monopod heads.
An impressive ultra wide-angle prime, the EF 14mm f/2.8L II USM is a Canon L-series lens well-suited for landscape, nature, and interior photography applications. Its relatively bright f/2.8 maximum aperture is well-suited to working in difficult lighting conditions and also makes this lens an ideal choice for astrophotography. The optical design incorporates two aspherical elements and two ultra-low dispersion elements to control both spherical and chromatic aberrations in order to realize a high degree of sharpness, clarity, and color accuracy. A Super Spectra coating has also been applied to suppress flare and ghosting for increased contrast and color fidelity when working in backlit and harsh lighting conditions. A ring-type USM and internal focusing mechanism also afford quick, quiet, and accurate autofocus performance, as well as full-time manual focus override. Additionally, this lens is weather-sealed for use in trying climates. Ultra wide-angle 14mm prime is compatible with full-frame Canon EF-mount DSLRs, as well as APS-C-sized models where it will provide a 22.4mm equivalent focal length range. Bright f/2.8 maximum aperture benefits working in low-light conditions and suits astrophotography applications. Two ultra-low dispersion elements are used to minimize chromatic aberrations as well as eliminate color blurring around the edges of subjects. Two aspherical elements help to minimize distortions and spherical aberrations in order to maintain edge-to-edge sharpness and illumination. Super Spectra coating has been applied to individual elements to minimize ghosting and flare for greater contrast and color neutrality when working in strong lighting conditions. A ring-type Ultrasonic Motor (USM), along with an internal focusing system, is employed to deliver fast, precise, and quiet autofocus performance as well as full-time manual focus override. As a member of the esteemed L-series, this lens is sealed against dust and moisture for working in inclement environmental conditions. Built-in lens hood helps to block stray light and also protects the bulbous front element. Lens's design accepts rear insert-type gelatin filters, which are cut-to-size and inserted behind the rear lens element.
Ultramasx UltraOne is a respirator with a built-in active 2-speed turbofan and equipped with removable HEPA and ultra-fine activated carbon filters with rating KN100/N100/FFP3 equivalent. Re-chargeable via USB and re-usable hundreds of times. U.S. FDA registered, CE and RoHS certified. UltraProtection: State of the art 4-stage HEPA and activated carbon filter membranes filtering more than 99.97% of PM0.3. In our last edition, we have also added an exhaust air filter to protect those around you. UltraVentilation: Active 2-speed electric turbofan provides up to 6.9 cubic meters of purified fresh air per hour. Excellent for everyday use or even for sports activities, especially in warm and humid climates. UltraComfortable: No more vapor fogging your glasses. Soft medical-grade silicone face seal for a perfect fit. Thin straps with limited contact on your face skin and wearable either behind the head or behind the ears. UltraSustainable: Re-chargeable via USB and re-usable with our Ultramasx UltraFilters�¢?�¢ cartridges. The mask lasts years, just changing the filters, minimizing environmental impact. Every box includes one Ultramasx UltraOneTM respirator mask, two pairs of silicone straps, two fitting clamps, two Ultramasx UltraFiltersTM, two exhaust air filters, one USB cable, and a travel pouch.
As Nikon's flagship DSLR, the D6 is, of course, a tough camera, too. Its magnesium alloy construction pairs with extensive weather sealing to resist dust and moisture, and a reinforced shutter mechanism has been tested for 400,000 shutter cycles. For viewing, there is a large pentaprism optical viewfinder with 0.72x-magnification as well as a rear 3.2" 2.36m-dot touchscreen LCD. Additionally, the body design incorporates dual CFexpress Type B memory card slots, which offer flexible file saving capabilities, and internal Wi-Fi and Bluetooth also benefit file saving needs as well as afford remote shooting control. For more robust connectivity, the D6 supports wired and wireless LAN connections, too. And, built-in GPS is featured, as well, for in-camera geotagging applications. In familiar form, too, the D6 also has a variety of configurable Function buttons across the body and an integrated vertical grip supports working in both horizontal and vertical shooting orientations. The peak of Nikon's DSLR lineup, the D6 is a no-holds-barred camera with a focus on speed, performance, reliability, and precision. Adept in both photo and video realms, the D6 revolves around a 20.8MP FX-format sensor and an EXPEED 6 image processor that enables an impressive 14 fps continuous shooting rate, a native sensitivity range from ISO 100-102400 (expandable up to ISO 3280000), and UHD 4K video recording at 30 fps. When working with stills, a revised high-density Multi-CAM 37K autofocus system features 105 cross-type points that improve focusing precision and speed, and with 1.6x greater frame coverage, the need to recompose while shooting is greatly reduced. This focusing system also works with 17 customizable Group Area AF patterns to suit working in cluttered or busy scenarios or with fast-moving subjects.
Olympus OM-D E-M5 Mark III is a Micro Four Thirds mirrorless camera with an abundance of speed, precision, and versatility. Featuring a 20.4MP MOS sensor and a TruePic VIII image processor, the E-M5 Mark III offers quick continuous shooting up to 10 fps with a mechanical shutter, up to 30 fps shooting with an electronic shutter, and DCI and UHD 4K video recording. The sensor and processor combination also affords a sensitivity range up to ISO 25600 while a sophisticated 5-axis sensor-shift image stabilization system compensates for up to 6.5 stops of camera shake for sharper handheld shooting. Complementing the imaging specs, the sensor's design also incorporates 121 phase-detection points, all of which are cross-type, along with 121 contrast-detection areas for fast and precise focusing and subject tracking performance. Despite all of its performance-oriented attributes, the E-M5 Mark III manages to retain a sleek design, which is also weather-sealed for use in trying weather conditions. A high-resolution 2.36m-dot 0.67x-magnification OLED viewfinder is featured along with a 3.0" 1.04m-dot touchscreen LCD, which sports a vari-angle design to suit working from high, low, and front-facing angles. Additionally, built-in Wi-Fi and Bluetooth enable wireless transferring and remote camera control from linked mobile devices.
A fast telephoto prime, the Nikon F, Sigma SA and Canon EF-mount 135mm f/1.8 DG HSM from Sigma pairs bright and sophisticated optics with intuitive handling and design. As part of the Art line of lenses, this 135mm f/1.8 is designed for high-resolution rendering, and utilizes FLD and SLD glass to control chromatic aberrations and color fringing for notable clarity. A Super Multi-Layer Coating also enhances image quality by suppressing lens flare and ghosting for improved contrast and color fidelity in strong lighting conditions. Additionally, making it an ideal lens for portraiture, the bright f/1.8 maximum aperture pairs with a rounded nine-blade diaphragm to benefit selective focus and shallow depth of field imaging with smooth bokeh. Complementing the imaging capabilities, the lens sports a Hyper Sonic Motor to produce quick, smooth, and quiet autofocus performance with full-time manual focus override. The physical design utilizes Thermally Stable Composite material for durability in a wide range of environments, and a brass bayonet mount also offers rigidity and mounting precision. As part of the Art line within Sigma's Global Vision series, this lens is designed to achieve truly notable optical performance and is ideally suited for creative and artistic applications. Prime telephoto lens is designed for full-frame Canon EF-mount DSLRs, however can also be used on APS-C models where it will provide a 216mm equivalent focal length. Bright f/1.8 maximum aperture is well-suited for working in low-light conditions and also provides greater control over the focus position when using shallow depth of field techniques. Two F Low Dispersion (FLD) and two Special Low Dispersion (SLD) elements are featured in the optical design, and help to reduce color fringing and chromatic aberrations for improved clarity and color accuracy. A Super Multi-Layer Coating has been applied to lens elements in order to minimize lens flare and ghosting and contribute to producing contrast-rich and color-neutral imagery, even in backlit conditions. Nine-blade rounded diaphragm contributes to a smooth and pleasing bokeh quality. The integrated HSM (Hyper Sonic Motor) realizes quick and quiet autofocusing, which is further complemented by an optimized AF algorithm to produce smoother focusing performance. The HSM also permits full-time manual focus control simply by rotating the focus ring at any time. The lens is constructed using a Thermally Stable Composite (TSC) material, along with traditional metals, for greater precision and use in wide temperature variations. The bayonet mount is constructed from brass for ensured accuracy and durability. Additionally, rubber sealing is incorporated in the mount design to render it dust- and splash-resistant. This lens is compatible with the optional Sigma USB Dock for fine-tuning different lens characteristics and updating its firmware.
Door hardware.Manufacturer
Stretch film, pakaging film.FOB
Card access, cctv, door locks, intercom.
Aluminum foil insulation.Financial support, after sale services
Coco pitch, fencing net, PP rope, floor mat, door mat, plush mat.
Perishable items.
Pvc Boards. Wpc Wall Panels, Pvc Wall Panels, Uv Marble Sheet., Fire Proof Board.
Adapters, converters, patch panels.
Ceiling fan, solar hot water systems. glass perspex, stretch film, opp packing tape, masking tape, safety boots. plastic chair. office furniture, building materials, adhesives. sealants.
Silicone rubber ZY-870 suitable for the production of ordinary silicone products, such as silicone rubber buttons, sealing rings, etc. Appearance translucent solid, density 1.20±0.03, hardness 70±3, tensile strength 6.0, elongation 200, tear strength 9.0, shrinkage 2.9~3.3, rebound elasticty 46, plasticity 250±25, vulcanizing agent double 2.5 .
Silicone rubber ZY-860 suitable for the production of ordinary silicone products, such as silicone rubber buttons, sealing rings, etc. Appearance translucent solid, density 1.16±0.03, hardness 60±3, tensile strength 7.0, elongation 260, tear strength 10.5, shrinkage 3.1~3.5, rebound elasticty 52, plasticity 230±25, vulcanizing agent double 2.5 .
