Phoenix Medical - Nitrile Gloves Product: Disposable Nitrile Protective Glove Type: Powder-free, Non-Sterile Material: 100% Nitrile Design and Feature: Ambidextrous, Beaded Cuff, Finger Textured Colour: Blue Size Available : S/M/L/XL Donning Aid: Beaded Cuff, Textured Surface, Chlorinated Protein Content: N/A Shelf Life: Products shall have a shelf life of 3 years from the date of manufacture with the below storage condition Storage condition: Product shall be stored under room condition, avoid direct sunlight Tensile strength (MPA) : Min 14 Elongation at break: Min 400
Transparent plastic face mask, transparent sanitary mask, anti fog restaurant mask, reusable hygiene mask, hygienic mask, sanitary face mask, face shield, plastic face shield,medical mask, kn95 protective mask, n95 medical mask, medical gown, protective medical gown, medical goggles.
Vietnamese-white-rice, brown rice, red rice, long grain short grain, fresh fruit, processed potato, food & beverage, masks, isolation gown, etc.
Personal protection equipment, face masks, gowns, n95, gloves, thermometers, oximeters, shoe covers, bouffant caps, face shield, coveralls.
Description : Certified NIOSH Approved FDA Filtration 0.6 micron 0.6 micron Efficiency 95% Silicon and latex free Weight Less than 12 grams Approved FDA
Clear Face shield visor can be easily cleaned with water or disinfectant. Ultimate sun protection, scratch resistance, blocking more than 98% of harmful dust. High-density polyethylene casing, which prevents chemicals, saliva droplets, and paints from splashing into your eyes and your face is protected well. Safe and comfortable, the full face protective cap provides more all-round coverage and protects the face from saliva flying into the air. Plastic face shield has a fully adjustable head harness that moves up and down easily and fits comfortably with most goggles and respirators. Extremely lightweight and can be used in various situations, such as laboratory work, woodworking, mowing, gardening, drilling, sanding, welding, outdoor sports, etc Quantity : 500,000
Infrared Non-contact LCD Display 2xAAA Batteries required 34-42.9 degree celcius readings Approved by CE TUV Description : Operated Infrared Digital display LCD Electric AAA battery -two Reading 34-42.9 deg C. Approved CE TUV Quantity : 100,000 Certification TUV
The YH-830 Bi-level device is indicated for treatment of sleep apnea hyponea syndrome in patients weighing more than 66Ib (30kg). It is intended both for home use and hospital use. The water tank is intended for single patient use in the home environment and re-use in a hospital/institutional environment. Maximum inhale pressure 30cmH2O, with separate humidifier (better humidification) ST and target tidal volume mode settings Fast rise time Normal inhalation intensity, respiration rate is 54 times / min, with each exhalation triggering the ventilator perfectly. Good synchronization with big flow Mode: CPAP, S, T, ST, VGPS Trigger adjustment Cycle adjustment Slope adjustment Noise less than 32 dB(A) With YF-01 mask, humidifier and SD card Water tank and power adapter Parameters Package Size 3 CTNS 48.5 32.521.5cm 37 24 17cm(Cart Parts) 90 52.8 21cm(trolly) N.W.(kg) 22 G.W.(kg) 28 Pressure: 4-30 cm H2O
The Y-30T respiratory ventilator comes with a humidifier and provides non-invasive ventilation for patients with respiratory insufficiency. BiPAP demonstrates excellent therapeutic effect for diseases like obstructive sleep apnea-hypopnea syndrome, SOAGG, chronic obstructive pulmonary disease, COPD, interstitial lung disease, ISL, spinal muscular atrophy, CMA, Pickwick syndrome, cystic fibrosis and amyotrophic lateral sclerosis, or ALS. BiPAP synchronizes quickly with the individual characteristics of the patient's body, with increased sensitivity of sensors and automatic adaptability of settings. BiPAP is easy to set up, and allows fast switches from different treatments, regardless of the number of patients and the complexity of the disease. Simple, reliable, sensitive, quickly synchronized with the patient Suitable for home use Non-invasive CPAP, S, S / T, T operating modes IPAP 4-30, EPAP 4-30 8-step inhalation-exhalation triggers Adjustable inhalation-exhalation pressure Inhalation time (0.5-3 seconds) and respiration rate 3.5 "color LCD display; high-quality body and humidifier material Monitoring Vt, Res Rate, Min Vent, Leak. Alarms in all respects 5-step adjustment of the humidifier Display of the key parameters of therapy in the online mode Build quality conforms to German standards ** Specifications Pressure Range: 4-30cm H20 Model number: Y30 Auto on/off: No Noise Level: 3 dB Weight: 1.3kg
Description : Color Blue Thickness 0.11 mm weight� 3.5-3.8 gm size 230 - 310 mm Type powder free non sterile Aproved INTCO QUANTITY (subject to prior sale) : 20,000,000 Certification : 20,000,000
This sanitizing gel is a simple, quick solution that protects against 99.9% of germs. Quickly evaporates; no soap or water needed to wash off. Rinse Free Gel Size 500ml 99% Sterilization Non-toxic Alcohol-based Standard EN 1276-2009 ECM Certified
Key Specifications/Special Features: Aerospace quality, professional technology, a popular model Easy to take, dampproof, quakeproof and salt fog resistance Invasive, non invasive and manual ventilation in one machine Volume regulation, pressure limit, time switch, demonstrating the strategy of lung protection Inspiration halt, convenient for sucking phlegm and avoiding cross infection Driven mode: pneumatically driven and electrically controlled Three kinds of power supply: A/C, D/C and on vehicle power supply Application: adult & child Ventilation modes Volume control: A/C SIMV A/C + SIGH Manual Ventilation SPONT NIPPV Controlling part Tidal volume (VT): 50ml~1500ml Minute Volume: 0~20L/min I/E Ratio: 1:0.3, 1:0.5, 1:0.7, 1:1, 1:1.5, 1:2, 1:2.5, 1:3, 1:3.5, 1:4 Respiratory rate (f): 4~80bpm Limited pressure: 1kPa ~ 5kPa Trigger sensitivity: 2kPa ~ 2kPa Continuous current: 3 ~ 5LPM Manual inspiration halt: 20s Inhaled oxygen concentration: 48% ~ 100% consecutive adjustment Safety valve pressure limit: 5.1kPa ~ 6kPa Monitoring part LCD display Airway pressure waveform Inhaled tidal volume Minute Volume Total respiratory rate Peak airway pressure Trigger pressure AC/DC indication Could monitor all parameters and waveforms in manual mode Audible and visual alarm part Upper and lower airway pressure limit Power supply failure Low charge of battery Others Power supply: AC220V± 10%, 50Hz± 1Hz, 12V on vehicle power supply Built in battery: provide a more than 2 hour power supply when power off Gas pressure: 0.25~0.6Mpa. Cylinder gas supply can work continuously for 30min. Ventilator compliance: 40 x 10 2 ml/Pa Weight: 22kg Export Carton Dimensions: 60x 40 x54 cm
VG70 is one of the modern ICU ventilator machines with a unique metal-based, autoclavable, heated exhalation valve comprised of a built-in flow sensor the non-consumable design Turbine-driven and electronically controlled. Comprehensive modes include: A/C; SIMV; PSV/CPAP; PRVC; SPONT/CPAP/+PSV; BIVENT+PSV; NIV/CPAP; NIV-T; NIV-S/T 12 TFT LCD detachable touch screen. Suitable for infants, pediatrics, and adults Invasive and non-invasive ventilation Functions include Apnea ventilation, smart suction, manual breath, Insp/Exp Hold, ETCO2 measurement, Nebulization, waveform freeze. It has also optimal patient-ventilator synchrony which increases patient comfort. Comprehensive lung mechanics monitoring The minimum tidal volume of 20ml in VCV mode It has 72 hours trend with 30 seconds of resolution Tube compensation, leak compensation & auto circuit compliance compensation Compact design, a built-in battery with 2 hour battery life. Upgraded ventilation system software, with an available USB port Specifications Dimensions (WxDxH) 375mm x 395mm x 430mm Weight 17kg (37.5lbs)
The Shangrila 510S is a universally used model. Not only for emergency ventilation, but also it is suitable for ideal transport ventilation. The circumstances include on-site emergency treatment, pre-hospital transport, interhospital transport, and even intra-hospital transport. Specification Ventilation Mode: Assist/Control (A/C) Manual Parameter MV: 3~20 L/min (used in 60%), 3~14L/min (used in 100%) Respiratory rate: 10~60bpm I:E ratio: 1:2 FiO2: 60%,100% Trigger sensitivity: Pressure, -3cmH2O Monitoring Pressure values: Paw Alarm: Paw high, O2 supply down Technical Data Gas supply: O2, 0.28~0.6MPa Maximum security pressure: 8kPa Compliance: 4mL/100Pa Noise: 65dB(A) Dimensions (H WD):276 110142mm Weight: 2.4kg Environment Requirement Temperature:-18C~50C (Operation)-20C~55C (Storage) Relative humidity: 5%~95%, non-condensing (Operation) 93% (Storage) Atmospheric pressure: 70~110kPa (Operation), 50~110kPa (Storage)
P30 Portable Non-invasive ventilation P30 is mainly applicable to patients with mild or moderate respiratory failure, no evidence of emergency intubation, relatively stable vital signs, and no contraindication to non-invasive ventilation. It is used for early intervention and assisted withdrawal of respiratory failure. Advantages Small SIze and easy to carry Color LCD display, easy to operate Display and monitor patient clinical usage data in real time Features Low-flow oxygen can be connected for air-oxygen mixing Has VAF target tidal volume function Can be equipped with blood oxygen module Can be equipped with an independent humidifier Configurable trolley Maximum JPAP to 30cmH20 Ventilation mode: CPAP, APAP, S, ST, T, APCV, AutoB 4 work modes: CPAP, S, T, S/T, APCV APCV mode:Assist pressure control ventilation Dynamically monitor the treatment effect Real-time alarm in case of failure Light weight:2.0kg (without trolley) Scope of application Assistant therape of respiratory disease, HD(Pulmonary heart disease), COPD(chronic obstructive pulmonary disease), Motor neurons. Specifications Difference: B-30P Screen: 3.5 Inch color TFT Work mode: CPAP, S/T, S, T, APCV Inspiration Pressure: 4-30cmH20 Inspiration Sensitivity: Auto, 1-6 level Expiration Pressure: 4-25cmH20 VAF function: Yes, Tidal Volume 50-2000ml
Description : Material Inner & Outer SBPP non woven Weight 22 GSM inner & Outer 20 GSM center Material center Meltblown Dimension 175mmx90mm +/-10mm Certified EN 14683-2005 Approved CE QUANTITY (subject to prior sale) : 50,000,000 Certification : FDA
For situations that call for disposable PPE, and a versatile garment for a range of jobs. These protective suits are able to breathe so they don't get too hot, but they stop hazardous particles down to 1 micron in size. Level C Protection Splash Resistant Complete face protection Polyethylene material Approved by FDA
Description " Covid 19 IgG/IgM Test Test Result 15 minutes Cassette 25test/kit Standard IVDD 98/79/EEC Ax.111 Approved PRISES QUANTITY (subject to prior sale) : 10,000,000 Certification : PRISES EN ISO
Wrap-around design fits snugly to protect you from flying debris, dust, airborne particles and splashes. Scratch resistant Anti-fogging Color: clear Lens material: polycarbonate DEscription : Safety Scratch resistant, anti fogging color clear lens material polycarbonate Quantity : 1,000,000
Silicone medical Safety goggles Material: Medical silicone Model: F-CKPG100,200,300,400 Product advantage: 1. Elastic wear, compatible with myopia glasses. 2. Double-sided anti-fog coating can prevent fogging. 3. The face frame and nose pad are made of breathable medical silicone, which is soft and comfortable to wear. 4. The 180-degree large window design provides a wider view. Production Description 1. It is suitable for protection during examination and treatment in medical institutions, blocking splashing or splashing of body fluids and blood, and can also be used for daily protection. 2. Ergonomic design without metal accessories, it looks more open and wearing safer and more comfortable. 3. The eyeglass are made of imported polycarbonate, which are reinforced with precision work. Please contact us for further information from the medical gown, protective gown and isolation gown supplier and wholesaler in Singapore.