1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200ï½?+260â?? 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile.
PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
Product Features 1. The appearance is translucent, visible and easy to observe. 2. High and low temperature resistance: -200 +260 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, hydrofluoric acid and various organic solvents 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency 5. Pure and pollution-free: low metal element blank value (lead and uranium content less than 0.01ppb) PFA implinger, with its unique PFA material, has brought unprecedented performance breakthroughs to the laboratory. PFA is an outstanding fluoroplastic that combines high corrosion resistance, high temperature resistance, and impact resistance to ensure stability in various harsh experimental environments. Its excellent corrosion resistance allows PFA implingers to easily cope with the erosion of various strong acids, strong alkali and organic solvents, and can still maintain its original performance after long-term use. At the same time, its excellent high temperature resistance also allows it to maintain stable chemical properties in high temperature environments and will not produce harmful substances due to temperature changes. In addition, PFA implinger also have excellent impact resistance and can withstand the strong impact and vibration generated during the experiment, ensuring the safety and stability of the experiment. Its high transparency design allows the experimenter to clearly observe the experimental process, whether it is color change, precipitation generation or gas release, all can be seen at a glance. Made in China
PFA acid purifier 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
The PFA sub-boiling acid distillation system is a purification equipment used to treat acidic solutions. It is made of PFA and PTFE materials and has excellent chemical inertness and corrosion resistance, especially suitable for handling highly acidic solutions. The working principle of the PFA sub-boiling acid distillation system is based on the principle of sub-boiling distillation. By heating the acidic solution to a sub-boiling temperature, it is partially evaporated. During this process, low-volatility impurities and ions are left in solution, while pure acidic vapors are collected and condensed. This enables the purification of acidic solutions. The advantages and features of the PFA sub-boiling acid distillation system include: 1. High purity: Through sub-boiling distillation, the PFA sub-boiling acid distillation system can purify the solution, remove impurities and ions in the acidic solution, and provide high-purity acidic steam. 2. Corrosion resistance: PFA material has good corrosion resistance, can withstand the erosion of strong acidic solutions, and will not be dissolved or contaminated by acidic substances. 3. Temperature control: The PFA sub-boiling acid distillation system has an accurate temperature control function, which can ensure operation at an appropriate sub-boiling temperature and avoid violent boiling and loss of the solution. 4. Energy saving: Compared with traditional acid distillation methods, the PFA sub-boiling acid distillation system operates at low temperature and low energy consumption, saving energy costs. 5. Reliability: PFA material is non-toxic, odorless, and has good chemical stability. The use of PFA sub-boiling acid distillation system can ensure the safety of experimental operations and working environment. PFA sub-boiling acid distillation systems are commonly used in the chemical industry, laboratory research and pharmaceutical fields to purify acidic solutions. This system can greatly improve the purity and quality of solutions and is suitable for use in experiments, analysis and production processes that require higher purity. It is necessary to select the appropriate model and specifications of the PFA sub-boiling acid distillation system according to the specific acidic solution and purification requirements to ensure the purification effect and use efficiency. Features of Binzhenghong SCH series sub-boiling distiller system/acid purification system: 1. Large capacity - the amount of acid evaporated at one time can reach 6L 2. Temperature control-PID temperature control digital display, real-time temperature display 3. Liquid level gauge - visually displays the remaining acid amount 4 distillation speeds, one distillation speed can reach 135ml/L Subboiling acid distillation tower/acid purification system specifications: 1L/2L/4L/6L
Pure honey and derivatives.Exportation
Avocados from Mexico Has
PURE RAW HONEY BEE, MANY-FLOWERED, COLOR AMBAR AND LIGHT AMBAR. WE HAVE 8 TONS AVAILABLE IN BUCKETS OF 19 LITERS = 27 KILOS
