Plastic bottle with cap.
Metal decor, metal house decor and everything regarding metal. towel hangers, christmas decos, tables, etc.
THE COAL IS OF VERY GOOD QUALITY FROM 6000 TO 7000 CALORIC ENERGY WE ARE INTERESTED IN SELLING THE MINE OR LOOKING FOR A PARTNERSHIP THAT BENEFITS BOTH PARTIES IF YOU BUY THE MINE THE COST PER TON OF COAL WOULD BE 7 DLLS IT IS AN EXCELLENT QUALITY COAL WE HAVE THE STUDIES AND THE PLACE IS ALREADY ENABLED TO EXTRACTE COAL FROM THE FIRST DAY IT IS A HUGE PROPERTY WITH LARGE CARBON RESERVES WE HAVE CALCULATED THAT WE HAVE HUGE COAL RESERVES TO WORK FOR MANY YEARS TELL ME WHAT YOU ARE INTERESTED IN DOING ABOUT THE BUSINESS WOULD YOU LIKE TO MAKE A VISIT TO THE MINE WE HAVE ACCOMMODATION WE ARE CLOSE TO THE INTERNATIONAL AIRPORT 1 HOUR FROM
COMMODITY: Caribbean Petrleum Coke. ORIGIN: Any of the following Caribbean ports: Trinidad & Tobago, Curacao, Colombia or Mexico, depening on the availability of the product at the time of placing the order. The quality, quantity of the product is guaranteed. PAYMENT TERMS: The buyer will guarantee the shipment with: A DLC, Confirmed, Irrevocable, Transferable and 100% at sight issue by one of the 25 Top World-Wide Bank and opened at least fourteen (14) calendar days prior to the firsts day of NOR of the vessel at loading port. Then, the Buyer will pay vi MT103 (T/T) the Total Value of the Final Proforma Invoice of the Contract, not later than Twenty-Four (24) hours as following event: First installment of Payment Via MT-103 according to the Seller Instructions, 50% of cargo value against the following docs: o Invoice; a payment receipt and/or Product Invoice issued by the Seller to the Buyer for the equivalent of 100% of the value of the product already loaded on the vessel, equivalent at least 50% of the total cargo offered. o Masters receipt for 50% of cargo loaded on board the exporting vessel. Second installment payment via MT-103, according to the Seller instructions 45% f total value vargo loaded against the following docs: o Invoice; a payment receipt and/or Product Invoice issued by the Seller to the Buyer for the equivalent of 95% of the total value of the product already loaded to the vessel, equivalent at least 95% of the total crgo offered. o Masters receipt for 95% of cargo loaded on board of the exporting vessel, equivalent at least to the 95% of the cargo offered. Final payment, against the following docs_ o Final Total Invoice in one original and three copies: Original B/Ls (Full set of 3/3 original Bills of Lading plus 3 non-negotiable copies of clean on-board Bill of Lding marked Freight payable as per Charter Party. Certificate of Quality (CIQ) Certificate of Quantity issued by the Independent Surveyor of the Loading Port. Certificate of Origin issued by the relevant Government authorities, 1 original and 1 copy/photocopy. All banking charges from the Buyer's bank shall be borne by the buyer and all banking charges incurred by the Seller and the Seller's bank charges incurred by the Seller at the Seller's bank shall be borne by the Seller. All taxes, duties, dues etc. for exporting goods at the loading port, if any shall be for Seller's Account. All taxes, duties, dues, etc. at the destination port shall be for Buyer's Account. When the Payment of 100% of the Final Proforma Total Value has been received and is fully available in the Seller's account the title to and risk's goods shall pass from the Seller to the Buyer.
100% POLIESTER JAQUARD, HOME WASHABLE, BEAUTIFUL DESIGNS
Percal blankets, table linens, napkins, individual covers, buffant caps, face mask, medical gowns, patient gowns, surgical scrub suits and gowns.
PFA wash bottle that can hold propane Product features 1. Translucent appearance; 2. Temperature resistance -200+260; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and uranium is lower than 0.01ppb 7. The drip tip and bottle cap are molded at one time, and the open mouth can be autoclaved. Product Specifications: 30/60ml
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and uranium is lower than 0.01ppb 7. Nozzle and bottle cap are molded at one time: open can be autoclaved Product Specifications: 1. Narrow mouth: 60/100/250/500ml 2. Wide mouth: 250/300/500/1000ml
Ceramic crafts, salamander, frogs, butterflies, ladybugs, bumblebees, turtles, suns, alajeros dolphins fruit bowls with clay plate. jewelry with handmade figures of fruits, flowers, earrings and necklaces palm/straw hats. pi�±atas of different sizes. carved wood art paper mache handicrafts lined with fur (parrots, woven furniture parota wood decorative vases, teak, purple rose all wood clay tableware clay and resin pots tables with epoxy resin. please feel free to ask for other mexican items such as drinks and food.Transportation and shipping therms: fob pay therms c/l
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 â?? to+260 â??, which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals. Product features 1. Translucent appearance; 2. Temperature resistance -200ï½?+260â??; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2 Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 to+260 , which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals. Product features 1. Translucent appearance; 2. Temperature resistance -200+260; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
Product Introduction: We can provide PFA isotope ion exchange columns of different capacities, diameters and lengths. This product is cast with PFA as the material, and the design combines the characteristics of a variety of capillaries and storage containers to meet your needs. The size can be customized according to your experimental requirements. The threaded port design allows users to choose a cap to protect the integrity of the liquid sample in the chromatography. Product Features 1. Repeatability: PFA column tubes can be used multiple times, and the material background is low, which greatly saves experimental costs 2. Visibility: When separating color samples with color, the PFA transparent column can visually see the separation color band 3. Sieve plate: Sieve plates of various particle sizes can be provided, with excellent distribution effect to achieve better separation 4. Large sample loading capacity: can be customized according to your experiment 5. One-time molding, no welding gaps, smooth liquid flow, ensuring durability 6. To prevent the sieve plate from falling off, the bottom can be sharpened according to the flow rate requirements PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, ion exchange columns, crucibles, valves, joints, delivery pipes and other products.
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 â?? to+260 â??, which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals.
Advantages of PFA Volumetric Flasks: 1.Superior Chemical Stability and Corrosion Resistance: Made from high-purity imported experimental-grade PFA material, these flasks exhibit outstanding resistance to a wide range of chemical reagents, including strong acids, bases, aqua regia, and various organic solvents. This ensures the integrity of the flask and prevents contamination of samples. 2.High Temperature Tolerance: Capable of withstanding temperatures ranging from -200�°C to +260�°C, the PFA volumetric flasks are suitable for various high-temperature experiments and industrial applications. However, it is recommended not to use them directly as heating vessels to protect the calibrated markings. 3.Excellent Transparency and Easy Observation: The flasks feature a highly transparent body, allowing for clear visibility of the liquid inside. This facilitates accurate monitoring of experimental progress and facilitates precise volume measurements. 4.Precision Calibration and Accuracy: Each flask is calibrated with laser-etched markings and verified using a precision electronic balance to ensure A-grade accuracy, complying with DIN EN ISO 1042 standards. This ensures reliable and repeatable results across various experiments. 5.Smooth Surface and Easy Cleaning: The smooth interior and exterior surfaces of the flasks prevent sample adhesion and make cleaning a breeze. This facilitates reusability and ensures hygiene between experiments. 6.Tight Sealing and Leak-Proof Design: Equipped with screw caps and thread seals, the flasks prevent sample contamination and leakage, ensuring the integrity of the stored solutions. 7.Low Background and Low Leaching: The PFA material exhibits low background and leaching characteristics, making it ideal for trace analysis experiments such as ICP-MS and ICP-OES, where even minute impurities can affect results.
