High Quality Clear Solvent Low aromatic Industrial White Spirit: Low aromatic White Spirit White Spirit Product Name White Spirit Appearance Clear Liquid free from suspended matter Viscosity 0.4 â?? 0.5 Cps. Color Water White Sp.Gravity at 20�ºC 0.775 Flash Point 42 �ºC. Distillation Range 153 �ºC. - 237 �ºC. Dry Point 237 �º C. Aromatic Value 15 â?? 17% KB Value 38% by weight Sulphur Content < 5 ppm Acidity Content Nil Corrosion None Water Content Nil
(1) EN590 (10PPM) ULTRA LOW SULPHUR DIESEL PRICE: USD465/MT LOADING PORT: ROTTERDAM ORIGIN: KAZAKHSTAN TOTAL/CONTRACT QUANTITY: 200,000 MT TRIAL DELIVERY SCHEDULE: TO BE ADVICED TERM: FOB TTV MODE OF PAYMENT: MT103 TT INSPECTION: SGS, CIQ OR SIMILAR BY BUYER FOB TRANSACTION PROCEDURES (TANK TO VESSEL) (2) JET FUEL A1 FOB Price: USD $ 87 / BARREL (Bbl) FOB Rotterdam ORIGIN: KAZAKHSTAN TRIAL/CONTRACT Quantity: 2,000,000 Bbl TRANSACTION TRANSFER: TANK TO VESSEL (TTV) INSPECTION: SGS INSPECTION PAYMENT: MT103/TT *note: please forward LOI (Letter of Intent) together with POF/BCL(bank confirmation Letter) for Trial Quantity amount.*note: This offer is first come first serve basis.
ITEM STANDARD Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25'C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36,000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 18 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200°C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200°C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance -> 1580 °C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025°C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �?± x 10-7 (°C-1) [50°C-500°C]  63.8 RESIDUE CONTENT Residue Content on 63m (w/w %)  1.7 Residue Content on 106m (w/w %)  1.6 Fired Shrinkage (%) (@1200°C)  8.5 Water Absorption (%) (@1200°C)  2.6 DRY MOR (kg/cm2)  57 FlRED COLOUR L Value  71.3 a Value  4.4 b Value  21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%)  60.23 Aluminium as A2O3 (%)  25.26 Titanium as TiO2 (%)  1.00 Iron as Fe2O3 (%)  1.94 Sodium as Na2O (%)  0.04 Potassium as K2O (%)  1.70 Calcium as Cao (%)  0.01 Magnesium as MgO (%)  0.60 Phosphorus as P2O5 (%)  0.03 Manganese as MnO (%)  0.01 Chromium as Cr2O3 (%)  0.01 Zirconium as ZrO2 (%)  0.04 Hafnium as HfO2 (%)  0.00 Sulphur as SO3 (%)  0.00 Strontium as SrO (%)  0.01 Loss on Ignition (%) (@1025°C)  9.1 MOISTURE CONTENT (%)  28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, ± x 10-7 ( C-1) [50 C-500 C] - 63.8 RESIDUE CONTENT Residue Content on 63¼m (w/w %) - 1.7 Residue Content on 106¼m (w/w %) - 1.6 Fired Shrinkage (%) (@1200 C) -8.5 Water Absorption (%) (@1200 C) - 2.6 DRY MOR (kg/cm2) - 57 FlRED COLOUR L Value - 71.3 a Value - 4.4 b Value - 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) 60.23 Aluminium as A2O3 (%) 25.26 Titanium as TiO2 (%) 1.00 Iron as Fe2O3 (%) 1.94 Sodium as Na2O (%) 0.04 Potassium as K2O (%) 1.70 Calcium as Cao (%)  0.01 Magnesium as MgO (%)  0.60 Phosphorus as P2O5 (%)  0.03 Manganese as MnO (%) 0.01 Chromium as Cr2O3 (%) 0.01 Zirconium as ZrO2 (%)  0.04 Hafnium as HfO2 (%)  0.00 Sulphur as SO3 (%)  0.00 Strontium as SrO (%) 0.01 Loss on Ignition (%) (@1025 C) 9.1 MOISTURE CONTENT (%)  28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 yearsâ?? experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �± x 10-7 (�°C-1) [50�°C-500�°C] --> 63.8 RESIDUE CONTENT Residue Content on 63�¼m (w/w %) --> 1.7 Residue Content on 106�¼m (w/w %) --> 1.6 Fired Shrinkage (%) (@1200�°C) --> 8.5 Water Absorption (%) (@1200�°C) --> 2.6 DRY MOR (kg/cm2) --> 57 FlRED COLOUR L Value --> 71.3 a Value --> 4.4 b Value --> 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) --> 60.23 Aluminium as A2O3 (%) --> 25.26 Titanium as TiO2 (%) --> 1.00 Iron as Fe2O3 (%) --> 1.94 Sodium as Na2O (%) --> 0.04 Potassium as K2O (%) --> 1.70 Calcium as Cao (%) --> 0.01 Magnesium as MgO (%) --> 0.60 Phosphorus as P2O5 (%) --> 0.03 Manganese as MnO (%) --> 0.01 Chromium as Cr2O3 (%) --> 0.01 Zirconium as ZrO2 (%) --> 0.04 Hafnium as HfO2 (%) --> 0.00 Sulphur as SO3 (%) --> 0.00 Strontium as SrO (%) --> 0.01 Loss on Ignition (%) (@1025C) --> 9.1 MOISTURE CONTENT (%) --> 28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200�°C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200�°C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025�°C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025 C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
We have ALL the stated products for immediate supply! Kindly refer to our "Offer" parameters; (a) Supply of JP54 and Jet Fuel A1 & D2. Our D2 product is gasoil 500 ppm max. Sulphur content. 1. Buyer to provide LOI and CP 2a. We will release CI 2b. Upon which buyer send TSA 3. 1M barrels on 1st lift followed by 2M bls monthly x 12 as minimum requirement 4. We release NDA / IMFPA 5. Buyer and Seller communicate direct 6. As is FOB Rotterdam 7. Seller pays com 8. LOI addressed to JM Buisac and Mr. Sattar, Mr. Otsugbede c/o AI Oro Valencia Barcelona Spain ESP. (b) SUPPLY OF LPG 1. We are able to supply LPG at 44,000MT on 1st lift x 12 months 2. Pricing is based on ARAMCOR pricing 3. Origin of supply will be Russia, Qatar and Oman 4. Buyer to provide LOI and CP 5. We will release CI 6. We release NDA / IMFPA 7. Buyer and seller communicate direct 8. Specification to buyer needs of propane and Butane mixture 9. LOI addressed to JM Buisac and Mr. Sattar / Mr. Otsugbede (c) SUPPLY OF LNG We are able to supply LNG as follows; 1. Buyer to provide LOI and CP 2. LOI content - Monthly supply 75, 000MT monthly Contract period of 5 year term Port of discharge Country of delivery Buyer bank to provide letter of support 3. Upon receipt of above we will provide buyer a term sheet and to be agreed with seller and buyer to proceed 4. Pricing is based on Brent Index 5. Once term sheet is finalized we will do NDA / IMFPA 6. We seller will pay com 7. Origin Russia, Norway or Brazil 8. Specification as to buyer needs 9. LOI addressed to Mr. Sattar and Mr. Otsugbede. Our Suppliers are a world player for the mentioned products. Looking forward to hearing from SERIOUS buyers only.
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �¯�¿�½?�± x 10-7 (�°C-1) [50�°C-500�°C] � 63.8 RESIDUE CONTENT Residue Content on 63m (w/w %) � 1.7 Residue Content on 106m (w/w %) � 1.6 Fired Shrinkage (%) (@1200�°C) � 8.5 Water Absorption (%) (@1200�°C) � 2.6 DRY MOR (kg/cm2) � 57 FlRED COLOUR L Value � 71.3 a Value � 4.4 b Value � 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) � 60.23 Aluminium as A2O3 (%) � 25.26 Titanium as TiO2 (%) � 1.00 Iron as Fe2O3 (%) � 1.94 Sodium as Na2O (%) � 0.04 Potassium as K2O (%) � 1.70 Calcium as Cao (%) � 0.01 Magnesium as MgO (%) � 0.60 Phosphorus as P2O5 (%) � 0.03 Manganese as MnO (%) � 0.01 Chromium as Cr2O3 (%) � 0.01 Zirconium as ZrO2 (%) � 0.04 Hafnium as HfO2 (%) � 0.00 Sulphur as SO3 (%) � 0.00 Strontium as SrO (%) � 0.01 Loss on Ignition (%) (@1025�°C) � 9.1 MOISTURE CONTENT (%) � 28 - 32