Appearance: Solid white crystalline product with mild odour. Application: Food Additives Soap & Detergents Personal Care & Toiletries Textiles: Rubber / Plastic Additives Product's Specification will be provided upon inquiries request.
Selection Choice: SN8020 TFM 72% & 78% SN8515 TFM 78% SN9010 TFM 78% Appearance: Solid Noodles / White to Yellowish Application: Soap and Cleansing Agent Product's Specification will be provided upon inquiries request.
Appearance: Light initial colour, good heat stability and low odour. Application: -Widely used in cosmetic industry, stabilisers, lubricants, resins and chemical intermediates.
Glycerol Tricaprylate/ Caprate; Medium Chain Triglycerides; Caprylic/ Capric Triglyceride Appearance: Colorless or slighty yellowish oily liquid. Manufactured by reacting fractionated fatty acids (mainly caprylic and capric acids) with refined glycerine; both raw materials derived from palm-based oils. The product is essentially odorless. Application: Used in nutrition diets, as meal replacement, as a quick sources of energy; as a food supplement; for weight control; as a cloudifier in fruit juices and soft drinks; in cosmetics, it can used as an emollient
TYPICAL APPLICATIONS Food Additives : Natural Antimicrobial Ingredient in Sanitizers for Food Contact Surfaces and Equipment Pharmaceuticals & Nutraceuticals : Particularly in Meat Processing Plants, Breweries and Wineries. Also used in Animal Feed Personal Care & Toiletries : To manufacture Esters used in the Production of Perfumes and Artificial Flavorings : Natural Antimicrobial Ingredient. Also acts as an Emulsifier and Emollient. Lubricants & Grease : Manufacture of Lubricating Grease Textiles : Used in treatments and the Manufacture of Dyes Rubber / Plastic Additives : Used in Plasticizers, Used in manufacture of Synthetic Rubber Others: Solubilizers for Mineral Oils
Principle use is in the manufacture of surfactants, soaps, detergents and chemical intermediates. Food Additives - Raw material for Emulsifiers Soap & Detergents - A base in the production of Liquid and Transparent Soap. Anionic and Nonionic Surfactants Personal Care & Toiletries - Emulsifier for Facial Creams and Lotions Textiles - Lubricant & Process Agent Rubber / Plastic Additives - Intermediate
Agro supplier so supply good quality mushroom, dry at a very considerable rate, packing is usually based on customer request as we intend to satisfy our customer, toadstool is the fleshy, spore-bearing fruiting body of a fungus, typically produced above ground, on soil, or on its food source, Valuable foods because they are low in calories, carbohydrates, fat, and sodium: also, they are cholesterol-free. Besides, mushrooms provide important nutrients, including selenium, potassium, riboflavin, niacin, vitamin D, proteins, and fiber Do not hesitate to contact us for more information when necessary Thank you
Specifications Product name: Non Gmo grade AA soybean/Soybean proteins - 12,95 g fats - 6,8 g; 1fcl/20ft: 23.5mt/1fcl Oil Content: 18 -19% (Max) carbohydrates: 11.05 g; water: 67,5 g; Test weight: 54 Pounds/Min/Bushel Heat damaged kernels: 0.5% Max Max radiation: Normal Total sugar: 11.2% Impurities: 1%max Broken: 10%max Discoloration: n1%max Admixture: 1% MAX Sizes: 6 - 9MM UP Fiber: 7% MAX Trace elements (potassium, calcium, phosphorus, magnesium, copper, sodium, iron). Fatty acids (linoleic and linolenic): phospholipids necessary for the normal functioning of the cells of the nervous system; vitamins A and E, estrogens. Used: Oil purpose & Human consumption.
Specifications Product name: Non Gmo grade AA soybean/Soybean proteins - 12,95 g fats - 6,8 g; 1fcl/20ft: 23.5mt/1fcl Oil Content: 18 -19% (Max) carbohydrates: 11.05 g; water: 67,5 g; Test weight: 54 Pounds/Min/Bushel Heat damaged kernels: 0.5% Max Max radiation: Normal Total sugar: 11.2% Impurities: 1%max Broken: 10%max Discoloration: n1%max Admixture: 1% MAX Sizes: 6 - 9MM UP Fiber: 7% MAX Trace elements (potassium, calcium, phosphorus, magnesium, copper, sodium, iron). Fatty acids (linoleic and linolenic): phospholipids necessary for the normal functioning of the cells of the nervous system; vitamins A and E, estrogens. Used: Oil purpose & Human consumption.
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200°C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200°C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance -> 1580 °C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025°C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �?± x 10-7 (°C-1) [50°C-500°C]  63.8 RESIDUE CONTENT Residue Content on 63m (w/w %)  1.7 Residue Content on 106m (w/w %)  1.6 Fired Shrinkage (%) (@1200°C)  8.5 Water Absorption (%) (@1200°C)  2.6 DRY MOR (kg/cm2)  57 FlRED COLOUR L Value  71.3 a Value  4.4 b Value  21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%)  60.23 Aluminium as A2O3 (%)  25.26 Titanium as TiO2 (%)  1.00 Iron as Fe2O3 (%)  1.94 Sodium as Na2O (%)  0.04 Potassium as K2O (%)  1.70 Calcium as Cao (%)  0.01 Magnesium as MgO (%)  0.60 Phosphorus as P2O5 (%)  0.03 Manganese as MnO (%)  0.01 Chromium as Cr2O3 (%)  0.01 Zirconium as ZrO2 (%)  0.04 Hafnium as HfO2 (%)  0.00 Sulphur as SO3 (%)  0.00 Strontium as SrO (%)  0.01 Loss on Ignition (%) (@1025°C)  9.1 MOISTURE CONTENT (%)  28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, ± x 10-7 ( C-1) [50 C-500 C] - 63.8 RESIDUE CONTENT Residue Content on 63¼m (w/w %) - 1.7 Residue Content on 106¼m (w/w %) - 1.6 Fired Shrinkage (%) (@1200 C) -8.5 Water Absorption (%) (@1200 C) - 2.6 DRY MOR (kg/cm2) - 57 FlRED COLOUR L Value - 71.3 a Value - 4.4 b Value - 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) 60.23 Aluminium as A2O3 (%) 25.26 Titanium as TiO2 (%) 1.00 Iron as Fe2O3 (%) 1.94 Sodium as Na2O (%) 0.04 Potassium as K2O (%) 1.70 Calcium as Cao (%)  0.01 Magnesium as MgO (%)  0.60 Phosphorus as P2O5 (%)  0.03 Manganese as MnO (%) 0.01 Chromium as Cr2O3 (%) 0.01 Zirconium as ZrO2 (%)  0.04 Hafnium as HfO2 (%)  0.00 Sulphur as SO3 (%)  0.00 Strontium as SrO (%) 0.01 Loss on Ignition (%) (@1025 C) 9.1 MOISTURE CONTENT (%)  28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 yearsâ?? experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �± x 10-7 (�°C-1) [50�°C-500�°C] --> 63.8 RESIDUE CONTENT Residue Content on 63�¼m (w/w %) --> 1.7 Residue Content on 106�¼m (w/w %) --> 1.6 Fired Shrinkage (%) (@1200�°C) --> 8.5 Water Absorption (%) (@1200�°C) --> 2.6 DRY MOR (kg/cm2) --> 57 FlRED COLOUR L Value --> 71.3 a Value --> 4.4 b Value --> 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) --> 60.23 Aluminium as A2O3 (%) --> 25.26 Titanium as TiO2 (%) --> 1.00 Iron as Fe2O3 (%) --> 1.94 Sodium as Na2O (%) --> 0.04 Potassium as K2O (%) --> 1.70 Calcium as Cao (%) --> 0.01 Magnesium as MgO (%) --> 0.60 Phosphorus as P2O5 (%) --> 0.03 Manganese as MnO (%) --> 0.01 Chromium as Cr2O3 (%) --> 0.01 Zirconium as ZrO2 (%) --> 0.04 Hafnium as HfO2 (%) --> 0.00 Sulphur as SO3 (%) --> 0.00 Strontium as SrO (%) --> 0.01 Loss on Ignition (%) (@1025C) --> 9.1 MOISTURE CONTENT (%) --> 28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200�°C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200�°C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025�°C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025 C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �¯�¿�½?�± x 10-7 (�°C-1) [50�°C-500�°C] � 63.8 RESIDUE CONTENT Residue Content on 63m (w/w %) � 1.7 Residue Content on 106m (w/w %) � 1.6 Fired Shrinkage (%) (@1200�°C) � 8.5 Water Absorption (%) (@1200�°C) � 2.6 DRY MOR (kg/cm2) � 57 FlRED COLOUR L Value � 71.3 a Value � 4.4 b Value � 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) � 60.23 Aluminium as A2O3 (%) � 25.26 Titanium as TiO2 (%) � 1.00 Iron as Fe2O3 (%) � 1.94 Sodium as Na2O (%) � 0.04 Potassium as K2O (%) � 1.70 Calcium as Cao (%) � 0.01 Magnesium as MgO (%) � 0.60 Phosphorus as P2O5 (%) � 0.03 Manganese as MnO (%) � 0.01 Chromium as Cr2O3 (%) � 0.01 Zirconium as ZrO2 (%) � 0.04 Hafnium as HfO2 (%) � 0.00 Sulphur as SO3 (%) � 0.00 Strontium as SrO (%) � 0.01 Loss on Ignition (%) (@1025�°C) � 9.1 MOISTURE CONTENT (%) � 28 - 32
Sodium sulphate.
Industrial and specialty chemicals like, sodium lignosulphonate, superplasticizer, defoamer, quartzsand.
PET bottle flakes, caustic soda, sodium sulphate, LCD cullet.Trading
Drilling Chemicals Eg Barite, Bentonite, Calcium Chloride, Potassium Chloride, Sodium Chloride, Sodium Bromide, Calcium Bromide And Emusifier P&s..