Kenyan Fencing Materials Suppliers and Manufacturers

Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Kenyan shea butter is renowned for its rich, moisturizing properties and high nutrient content, making it an ideal ingredient for skincare, haircare, and cosmetics. Sourced sustainably from wild-growing shea trees by local communities, it supports both environmental conservation and fair trade practices. We offer flexible packaging options, including 25kg and 50kg containers, suitable for bulk buyers. Orders are processed promptly, with delivery timelines ranging from 2-4 weeks, depending on the destination and order size. Our shea butter is carefully packaged to preserve its quality during transit, ensuring that it arrives in excellent condition, ready for use in high-quality formulations.

Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

Pure sulfuric acid does not occur naturally due to its strong affinity to water vapor; it is hygroscopic and readily absorbs water vapor from the air. Concentrated sulfuric acid is highly corrosive towards other materials, from rocks to metals, since it is an oxidant with powerful dehydrating properties. Phosphorus pentoxide is a notable exception in that it is not dehydrated by sulfuric acid but, to the contrary, dehydrates sulfuric acid to sulfur trioxide. Upon addition of sulfuric acid to water, a considerable amount of heat is released; thus, the reverse procedure of adding water to the acid should not be performed since the heat released may boil the solution, spraying droplets of hot acid during the process. Upon contact with body tissue, sulfuric acid can cause severe acidic chemical burns and even secondary thermal burns due to dehydration. Dilute sulfuric acid is substantially less hazardous without the oxidative and dehydrating properties; however, it should still be handled with care for its acidity.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

We source this natural product from trusted livestock farms, primarily using cattle, sheep, or other approved animals raised under stringent health and safety regulations to ensure the highest quality raw material. The bile is collected through a careful, humane extraction process and undergoes thorough filtration and pasteurization to remove impurities, followed by concentration and preservation methods to retain its essential bile acids, which are critical for its use in pharmaceutical, nutraceutical, and traditional medicine applications. Our bile paste is processed in GMP-certified facilities, adhering to strict industry standards to ensure purity, potency, and safety. We offer bile paste in a variety of bulk quantities, ranging from 500kg, depending on the needs of our clients, with packaging designed to maintain the product's integrity throughout storage and transportation. For optimal preservation, we use airtight, food-grade containers, such as HDPE drums or stainless steel barrels, that are resistant to contamination and ensure the paste remains stable during shipping. These containers are typically sealed in moisture-resistant, tamper-proof linings to protect the paste from environmental exposure, thereby preserving its chemical properties and extending its shelf life. Our bile paste is shipped worldwide through a variety of transport methods, including refrigerated air or sea freight to ensure temperature control and product safety during long-distance transit

Sacha Inchi Oil Specifications Botanical Name: Plukenetia volubilis Extraction Method: Cold Pressed Plant Part Used: Seeds (from the Sacha Inchi plant) Processing Type: Unrefined Appearance: Clear, light yellow to golden yellow oil Odor: Light, slightly nutty aroma Shelf Life: 12 to 18 months (when stored in cool, dark conditions) Chemical Composition: Omega-3 Fatty Acids (Alpha-Linolenic Acid - ALA): ~45-50%, Omega-6 Fatty Acids (Linoleic Acid): ~35-40%, Omega-9, Fatty Acids (Oleic Acid): ~8-10%, Protein: Rich in essential amino acids, Vitamins: High in Vitamin E (Tocopherols) and Vitamin A Bulk Packaging (Wholesale): Aluminum or Stainless Steel Drums (5L, 10L, 25L): Features: Protects the oil from light and oxidation, used for large quantities of oil for industrial purposes. Ideal For: Large cosmetic and skincare manufacturers. HDPE Jerry Cans (5L, 10L, 20L): Features: Durable, light-blocking plastic, suitable for storing large quantities. Usually sealed with airtight caps to prevent contamination. Ideal For: Wholesale supply to manufacturers or distributors. IBC Totes (200L, 1000L): Features: Industrial-sized containers for bulk storage and transportation. Often used for shipping large quantities. Ideal For: Large-scale production or international shipping. Flexitanks (up to 24,000L): Features: High-volume, flexible storage bags used in shipping containers for bulk oil transport. Ideal For: Export and mass supply to global manufacturers.

We are excited to introduce Rose Geranium Oil to our growing line of natural products. Sourced from the finest rose geranium plants, our oil is steam-distilled to ensure the highest quality, making it a superior choice for various industries, including skincare, aromatherapy, and perfumery. Why Choose Us: 1. We ensure rigorous quality control, providing only pure, undiluted rose geranium oil. 2. Our oil is sourced from sustainable farms that respect the environment and prioritize ethical farming practices. 3. We offer flexible packaging sizes, including bulk options, to meet the needs of businesses of all sizes. 4. With a reliable supply chain, we guarantee timely delivery for both local and international orders.

Fruit seed oil is a type of natural oil extracted from the seeds of various fruits. These oils are rich in essential nutrients such as vitamins, antioxidants, and fatty acids, making them popular for use in skincare, cosmetics, and wellness products. Common fruit seed oils include: Avocado seed oil Mango seed (butter) oil Grapeseed oil Pomegranate seed oil Raspberry seed oil After extraction, some oils may go through a refining process, which includes: Neutralization: To remove any free fatty acids. Deodorization: To remove strong odors. Bleaching: To reduce color pigments, although this can impact the oil's nutrient content. Once the oil is extracted, it is typically stored in dark, airtight containers to protect it from exposure to light, air, and moisture, which can degrade the oil's quality.