Adhesive for paper bags.
Adhesives : packing tape, stationery tape, printing tape, masking tape, double side tape, invisible tape, silk tape, hologram tapes, flavored cashew nuts, peanuts, macadamia nuts, hazelnuts, hps groundnuts, betel nuts, sisal fiber, donkey skins & hides, a4 copy paper, used engine, car parts, car accessories, car engines, hides & skins, animal skins & hides, snails, aluminum rails, copper wires & cables, copper cathodes, cobalt, petroleum products.
Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.
Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils
Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RABIT Trading Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it�¢??s a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Sisal Fibers Known as the raw material for sacks the world over, sisal is truly one of the most versatile fibers gifted to man by nature that finds various uses in the form of handicrafts. Next to cotton. Specifications Natural Sisal Fiber Type 1 Type 2 Type 3 Type 4 Type:Natural Sisal Fiber Type 1, 2, 3 and 4 Form:Container 20â?? (12MT) our 40" (28MT) Package:250kg Natural size of the fiber: Between 90cm to 1.20cm sisal fiber: Grade A Length: 110cm-130cm Moisture: 10%-13%. Impurity: 0-2% max Color: cream white cream, Brown.
We supply the best UG grade A sisal fiber you can ever find in the market. sisal fiber: UG Grade A Length: 110cm-130cm Moisture: 10%-13% Impurity: 0-2% max Color: cream white cream, Brown . Loading: 20ft Container (14MT) and 40ft Container (28MT) Packing: - Tightly Strapped of 100 kg, 280 bales per 20ft or 40ft container or as customer request Dimension per bundle: length 130cm, width 52cm, height 31-36cm, volume 0.202-0.253m3.
sisal fiber: Grade A Length: 110cm-130cm Moisture: 10%-13%. Impurity: 0-2% max Color: cream white cream, Brown . We take pride in the quality of our fibre and we are ready to assist you and offer the best price and quality. We accept short and long term contracts. Sisal Fiber Specification Product Type: Sisal Fiber Pattern: Raw Feature: Anti-Bacteria, Anti-UV, Chemical-Resistant, Eco-Friendly Use: Concrete, Filling Material, Non-Woven Fabric, Spinning Material: Sisal Fiber Fiber Length: 110-130CM Fineness: WhiteSisal FiberSpecification Product Type: Sisal Fiber Pattern: Raw Feature: Anti-Bacteria, Anti-UV, Chemical-Resistant, Eco-Friendly Use: Concrete, Filling Material, Non-Woven Fabric, Spinning Material: Sisal Fiber Fiber Length: 110-130CM Fineness: White
Our company is a renowned supplier of Natural Sisal Fibre in natural white, Brown and between white and brown colors of SSUG/UG/Polished grades suitable for Gypsum , cove decoration ,casting , Moulding , plaster architectural mouldings etc in length ranging from 70cm-160cm , Moisture content 7%-10% ,Impurities ranging from 0-3% PRODUCT DETAILS Fibre type : SSUG Grade and UG Grade sisal fiber with Free Samples Fibre length : 90cm to 120cm Fibre size : Bulk End use/Application : Gypsum -Cove Decorative -Moulding -casting -plaster architectural mouldings -casting Gypsum & Fixing GRG ETC TRADE INFO Min Order : 5 Metric Ton Production Capacity : 10 Containers-40'Containers Export Market : Eastern Europe Sampling : Free Place of origin : Kenya Payment Terms : T/T Delivery Time : 3days to 15days Packaging Details : 100KG per bale, 28MT per 40' container ,18 MT per 20 feet containers.
Specification of sisal fiber Product 100% Natural Sisal Fiber Color white Material 100% sisal fiber Fitness 1.2D-15D Fiber Length 80MM-130MM MOQ 1000 mkgs Certification ISO Delivery time within 18 days after received down payment or original L/C Production capacity 1, 000mts Per month Packing detail PP woven bag;100kg/bale Payment term ,T/T, western union MoneyGram