Radiator stripping machine BS-1200P is a hot selling model for stripping copper from aluminum, popular in the scrap copper recycling market. This radiator recycling machine is often used to process scrap radiators, including car radiators, water tank radiators, copper radiators, ac condenser radiators, etc. Has mature technology, high machine quality, and good machine performance, got many clients' good feedback, and is very popular in a scrapyard. Processing capacity is about 600kg per hour; Technical data of this copper aluminum separating machine: Processing capacity: 600kg/h Motor power: 7KW Machine size: 1800*900*1350mm Machine weight: 600kg
New product radiator recycling machine BS-1200S from the BSGH factory is copper recycling machine for separating copper tubes from aluminum foils. This automatic radiator separator machine can help you separate and recycle scrap copper from radiators fast and efficiently. BS-1200S radiator stripper machine has a bigger processing range, and can process different sizes of standard radiators, such as these radiators the copper tubes center distance is 17mm, 19mm, 21mm, 22mm, and 25mm; BS-1200S radiator copper recycling machine can process and recycle most of the scrap radiators, such as water tank radiators, car radiators, air conditioning radiators, and so on. The final product is pure copper tubes and aluminum foil, selling these scrap copper and aluminum helps you make money.
Big capacity radiator recycling line BS-ACP1000 is used to separate copper, aluminum, and iron from the waste radiator. Compared with the ordinary copper and aluminum radiator recycling machine, the biggest advantage of BSGH's new scrap radiator separator recycling line is that it can directly process all kinds of waste radiators without pre-cutting scrap radiators. Advanced technology and complete process flow ensure the separation and recovery of copper and aluminum and realize the regeneration of metal resources. The separation efficiency of copper and aluminum is greater than 99%, and the separation efficiency of iron is greater than 99%, the dust removal efficiency is greater than 99.9%. Technical data of radiator recycling machine is as follows: Model: BS-ACP1000 Application material: All kinds of radiators from the air conditioners, cars, water tanks, and so on Processing capacity: 2-3T/H Separate recycling rate: 99% Dust recycling rate: 99% Machine Power: About 149.55KW Machine Size: 27000 8000 5000MM
Second hand equipment such as container cranes, jib cranes, overhead cranes, generators, engines spare parts, injection molding machines, compressors, chemical process lines, steel process lines, printing machines and pressing machine, sea water desalination system.Demolition work, relocation
European and japanese diesel engine spares yanmar, daihatsu, mitsubishi, akasaka, kobe, hanshin, man b&w, sulzer , refrigeration, aircon, air compressor spares, fishing materials, hydraulic parts & general hardwares.
Kubota XB-1 - 11.8 hp 8.8 kW Engine: Kubota 0.8L 3-cyl diesel Fuel tank: 3.4 gal 12.9 L Chassis: 4x4 MFWD 4WD Cab: Open operator station. Transmission: 6-speed gear
Maker: Mitsubishi Forklift Model: FD280 (Year 2016, Hour: 6.9 h) x1 unit Located in Japan Length: 9670 mm Width: 3680 mm Height with Mast lower positionï¼?5020mm Height with Mast upper positionï¼?6770mm Wheelbase: 4800mm Front tread: 2635mm Rear tread: 2750mm Lowest from the floor level (below the mast): 380mm Fuel tank: 480 litter Weight: 43670kg Engine: Mitsubishi 6D24-TCE1 Diesel engine Rated output/rotation speed: 224/2200Kw/rpm Max torque/rotation speed: 1135/1400 Nã?»m/rpm Displacement: 11.94 litter Tire: Front: 16.00-25-28PR (I) Double tire Rear: 16.00-25-28PR (I) Running capacity: up to 33.5 km/h Minimum turning radius: 6800mm Mast: Roller driven 2 step Panorama mast Tile: 6 degree and then 12 degree Fork Length: 2440mm Fork Width x Thickness: 320 x 110mm Attachment: Hydraulic Fork positioner with side shift Side shift (For right and left): 300mm Fork position range (Outer- Outer): 790-2840 mm Lifting Capacity: Load: 25000kg Load centering: 1250mm Max lifting: 3500mm Lifting speed: Empty 430mm/sec, with load 390mm/sec
Porcelain enamel (vitreous enamel) kitchenware. pot, pan, casserole, containers, fryer oil storage container, mug, kettle, baker and so on..
A 20cm pasta pot that sports a rhythmical and unique look made of the finest enamel. The unique look is not just for show and is made to accommodate pasta of any length, and prevents accidental spillage. Able to approximately cook 3 servings of pasta. Induction Cooktop cooking heater compatible MOQ: 600PCS, FOB Bangkok Model Number N-20P RW Product Dimensions W285 x D250 x H210mm Capacity 6.2L Weight 2.5kg Colour Red / White JAN Red 4977618105372 White 4977618104672
Solid Series 2.3L Kettle Dimensions:W235 x D190 x H210mm Capacity:2.3L Weight:1.2kg(Including Cosmetic Box) â?»Cooking Stove, Induction Cook top, Cooking Heater, Compatible MOQ600 FOB Bangkok SD-2.3K.R (red) SD-2.3K.M (Mustard) SD-2.3K.W (white) SD-2.3K.SB (smoke blue) SD-2.3K.Y (yellow) SD-2.3K.G (green)
Minimum order quantity: 600 pieces Our first ever pot made with ultra-low carbon steel, with a thickness of a mere 1.8 millimeters to keep it light in the kitchen, the carbon steel compared to a cast iron is lighter while being just as efficient. The carbon steel while being light is extremely durable and is compatible with an IH cooking heater keeping the heat evenly distributed within the pot and heats up quickly, reducing energy usage and contributing to being environmentally friendly. Compatible with the oven and perfect for making bread. 200V Induction cook top, Cooking Heater Compatible Oven Compatible Model Number EX-16C Price $36.54 MOQ600, $30.77 MOQ3,000 Product Dimensions W275 x D200 x H160mm Capacity 2.1L Weight 1.75kg including a cosmetic carton. Color Scarlet, Payne's Gray, Ivory JAN Scarlet 4977618108779, Payne's Gray 4977618108786, Ivory4977618109899
solids control equipment for sale solids control equipment Solids Control Equipment Solid Control Equipment is specialized machinery used in drilling operations to separate and remove solid particles from drilling fluids, enhancing efficiency and safety. Shale Shaker As the first stage separating equipment of solids control system, shale shaker plays an important role in determining the performance of subsequent separation procedures. Vacuum Drying Shale Shaker Vacuum Suction Shale Shaker is a device that uses vacuum power to separate solids from drilling fluids. Vacuum Degasser A Vacuum Degasser is a device that removes unwanted gases from drilling fluids. Desilter Desilter is a device used to remove fine particles from drilling fluids in oil and gas extraction. Desander Desander is a device used to remove large drill solids from the drilling fluids in the oil and gas industry. Mud Cleaner A Mud Cleaner is a device used to remove contaminants from drilling fluid in oil and gas extraction. Mud Gas Separator Mud Gas Separator is a piece of equipment used in oil and gas drilling to separate gas from drilling mud. Flare Ignition Device Flare Ignition Device is used to ignite excess gas in oil and gas drilling operations. Mud Agitator A Mud Agitator is a device used to stir and mix drilling mud in oil and gas operations. Mud Gun A Mud Gun is a specialized tool used in drilling operations to agitate and re-circulate drilling mud. Mud Mixing Hopper A Mud Mixing Hopper is a specialized device used to mix drilling fluids in oil and gas exploration. Mud Tank A Mud Tank is a large storage container used to hold, mix and circulate drilling mud in drilling operations. Decanter Centrifuge Decanter Centrifuge is a device that uses centrifugal force to separate different components of a liquid, often used in waste processing. Why Is Solid Control Equipment Necessary for Drilling Fluid? î?? Efficiency Efficiency: BZ solids control equipment helps to remove unwanted solids from the drilling fluid, which can increase the drilling speed and reduce the wear on the drilling equipment. Cost-Effective Cost-Effective: By reconditioning and reusing drilling fluid, solid control equipment can significantly reduce the cost of drilling operations. It minimizes waste disposal and the need for fresh drilling fluid.
Chemical Name: Dibenzothiazole disulfide Molecular Formula:C14H8N2S4 Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Chemical Name:2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Modular Weight: 167.25 CAS NO: 149-30-4 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging:25kg bag.
Chemical Name: N-Tertiarybutyl-2-benzothiazole sulfenamide Molecular Formula:C11H14N2S2 Molecular Weight:238.37 Quality standrad:HG/T2744-96 CAS NO:95-31-8 Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name: Tetramethyl thiuram disulfide Molecular Formula: C6H12N2S4 Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight:264.4 CAS NO:95-33-0 Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
We are looking for buyers for silicon ingot scrap for semiconductor applications. Product Overview Product types: Top & Tail, side pieces, ingot scraps, etc. Ingot size: 12 inch and 8 inch are the mainstream, 6 inch is a little Stock amount: Over 100 tons Product raw material: Ingot for semiconductor use (11N product) Mainly CZ products, small amount of FZ products Product characteristics Doped: Basically phosphorus and boron N type & P type (both available) Resistance value: 1 or more, 5 or more (separate storage) Carbon content: As it is 11N product, the carbon content is in PPM units. All products are inspected (N type/P type, resistance value, visual inspection) Sales method: Approximately 25 tons delivered by container MOQ: 25 tons/month, 1 year continuous contract (Spot trading is also possible, but the unit price will change.) Payment method: 100% advance payment Delivery method: EXW or delivery to a designated port (additional cost required) Unit price: 7USD/kg Submission of quality inspection certificate: Inspection certificate as evidence of the shipped product Documents to be submitted: Shipping judgment slip (X-ray fluorescence analysis data attached) / for each shipment Judgment items:Â Visual check ... No foreign matter, oil, or moisture (excluding identification stickers, fixing tapes, crystal orientation markings, etc.) Weight check ... Matches the slip (within +3kg/-0% per package) Component analysis ... No detection of P (phosphorus) (N.D.) Analysis method: Randomly sample samples from each shipping lot and perform qualitative analysis using X-ray fluorescence. Quantitative analysis is performed on lots that detect P (phosphorus) spectrum during sampling inspection. Basically, it can be exported to the whole world except for some regions. This product is a semiconductor-level crystal, so it is a product for 100% remelting. When purchasing, you must agree to the pledge.