PP BIG BAG ( JUMBO BAG) SCRAP 20T PER CONTAINER WHITE IS USD 250/T ANOTHER COLOR IS USD 150/T
Mixed plastic scrap In this mixed plastic scrap Pp, pe, ps, abs, pvc, etc. Are included. Plastic content is 75 ~ 80%. Trial order is 40 ft container (20 mt). Moq is from 100 mt. Supply ability 1000mt/month
We are looking for buyers for silicon ingot scrap for semiconductor applications. Product Overview Product types: Top & Tail, side pieces, ingot scraps, etc. Ingot size: 12 inch and 8 inch are the mainstream, 6 inch is a little Stock amount: Over 100 tons Product raw material: Ingot for semiconductor use (11N product) Mainly CZ products, small amount of FZ products Product characteristics Doped: Basically phosphorus and boron N type & P type (both available) Resistance value: 1 or more, 5 or more (separate storage) Carbon content: As it is 11N product, the carbon content is in PPM units. All products are inspected (N type/P type, resistance value, visual inspection) Sales method: Approximately 25 tons delivered by container MOQ: 25 tons/month, 1 year continuous contract (Spot trading is also possible, but the unit price will change.) Payment method: 100% advance payment Delivery method: EXW or delivery to a designated port (additional cost required) Unit price: 7USD/kg Submission of quality inspection certificate: Inspection certificate as evidence of the shipped product Documents to be submitted: Shipping judgment slip (X-ray fluorescence analysis data attached) / for each shipment Judgment items:Â Visual check ... No foreign matter, oil, or moisture (excluding identification stickers, fixing tapes, crystal orientation markings, etc.) Weight check ... Matches the slip (within +3kg/-0% per package) Component analysis ... No detection of P (phosphorus) (N.D.) Analysis method: Randomly sample samples from each shipping lot and perform qualitative analysis using X-ray fluorescence. Quantitative analysis is performed on lots that detect P (phosphorus) spectrum during sampling inspection. Basically, it can be exported to the whole world except for some regions. This product is a semiconductor-level crystal, so it is a product for 100% remelting. When purchasing, you must agree to the pledge.
Seller firsly need ICPO with Buyer bank detail and Company Registration certificate and Buyer's passport copy Seller can then issue the FCO And this is not negotiable. Copper Millberry Scrap Price: $4,700 per MT(FOB) $5,000 per MT(CIF) Origin: Zambia/DRC Shipping Terms: CIF/FOB MOQ: 2,000 MT Payment Terms: 100% DLC Non-Transferable payable at destination port after SGS inspection. Incase quantity is less than 2,000 MT for any trail quantity (MOQ-200MT), the payment terms will be SBLC MT-760 Transferable Divisible and irrevocable payable at destination port after SGS inspection NOTE: The banking instrument (sblc, dlc) will be issued in favour of the seller's financier. The financier information will be stated on the contract. - The buyer must send ICPO including Banking details of buyer from which buyer will issue the SBLC or DLC, Buyerâ??s company registration certificate and Buyer's passport copy. PROCEDURE: @@@ -The buyer send ICPO which includes banking details from which DLC/SBLC to be issued, Company Registration certificate and Buyer's passport copy. -The seller send FCO. -The buyer sign FCO and return to seller. -The seller send SPA with a detailed CIS which includes seller Export License and seller's passport copy. -The buyer sign SPA with a detailed CIS. -The buyer will issue RWA letter from bank to bank in favour of the seller or in favour of the seller's financial company. - The seller will send Past performance which consist of Sanitised/Redacted BL, SGS inspection report and customized POP video with date and code given by buyer and buyer's company name. - The buyer's bank will issue the original payment guarantee which is DLC Non-Transferable MT-700 payable at destination port after SGS inspection - Seller will issue 2% PB against the DLC and after receiving the 2% PB the DLC will be activated. - Seller will start the production based on the buyer's product specifications, after the seller recieved the buyer's original payment guarantee. -The seller will do all necessary documentation on the product; and - Buyer can visit and inspect the materials and even can witness the SGS inspection - Seller will then convey the product to the buyer's destination port. - Upon the arrival of the product at the buyer's destination port, the buyer will conduct a thorough SGS on the product. - After buyer have confirmed the originality of the product, buyer will check all product documents and the buyer will transfer the seller's 100% payment through mt103. - After the seller confirm the payment, the seller will release all documents to the buyer. If the buyer can strictly follow all the procedures above, then we can confidently supply the product. And please, include the same procedure in ICPO to ensure smooth� transactions!
1) 64-bit CPU computer with faster computing speed and accurate positioning of incoming and outgoing molds, ensuring that the molds are not damaged. 2) The electro-hydraulic integrated servo system makes the machine more silent, energy-saving, fast, accurate and has low oil temperature. 3) The flow rate and pressure of each action can be set separately to meet the needs of complex production processes. 4) The fast and slow mold calibration function makes the installation of molds more precise and safe. Applications of the rubber injection molding machine for sale Rubber mould making machine are essential equipment in various industrial and commercial applications. YF POWER, a leading rubber injection molding machine manufacturers, produces high-quality rubber machines that are used in the production of various rubber products.
Chemical Name: 2-Mercapto benzimidazole Molecular Formula:C7H6N2S Molecular Weight: 150.19 CAS NO: 583-39-1
Chemical Name: Tetramethyl thiuram disulfide Molecular Formula: C6H12N2S4 Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name: N-Tertiarybutyl-2-benzothiazole sulfenamide Molecular Formula:C11H14N2S2 Molecular Weight:238.37 Quality standrad:HG/T2744-96 CAS NO:95-31-8 Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight:264.4 CAS NO:95-33-0 Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Modular Weight: 167.25 CAS NO: 149-30-4 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging:25kg bag.
Product Name Used railway iron Quantity MOQ 50,000MT/month Price CIF 260US $/MT Delivery time Normal Type of Transaction CIF Payment Terms DLC at sight TRIAL None Transaction term 12 months
Chemical Name: Dibenzothiazole disulfide Molecular Formula:C14H8N2S4 Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Quick release thread protector is used to protect steel pipe thread from abrasion and damage in the process of loading, unloading and transportation. It is a kind of manual device and its structure is very simple. It is composed of three parts: main body, link stopper and compressor bar. All of the three parts are made from nr/nbr, so quick release thread protector is highly resistant to oil, abrasion and corrosion. It has solid structure and long life span, and it performs well in protecting casing thread, so it is widely used. Besides, it saves time and lowers cost. The operation of quick release thread protector is very simple. Place the quick release thread protector at the end of steel pipe thread and then push the handle firmly toward the steel pipe center and the quick release thread protector is fixed on the pipe. You can take the quick release thread protector off steel pipe by pulling the handle up.
Hms - spain origin scraps are required in bulk.
Product origin: Japan Specifications: The product is a separator used in Lead Acid Batteries. It is derived from pulp of wood. This separator is far stronger than the common polyester made separators. This product is very effective for high temperatures, strong vibration, and high-current /high voltage. We can produce the separators as per ur required specification. It is widely used in Japan for passenger cars , heavy machinery, tractors, carts, etc. Packing : in cartons Minimum order qty: 20ft container
PP and PE Mix Bale 40MT per month ITEM Name Is K Please look for picture Thank you
Chemical Composition Rail R50 (Gost7173-75) and R65 (Gost-8165-75) International Standards as follows : R50 -51.67 kg/m GOST 7173-75 C: 0.54 - 0.82 % Mn: 0.60 - 1.05 % Si: 0.18% - 0.40% ; P: 0.035 % S: max. 0.045 % As: 0.01 % Mix of Mass Share R65 - 64.72 kg/m GOST 8165-75 C: 0.54 - 0.82% Mn: 0.60 - 1.05% Si: 0.18% - 0.40% ; P: 0.035 % S: max. 0.045 % As: 0.01 % Mix of Mass share. Origin: Saudi Arabia.
Raw material for manufacturing caprolactum (nylon), nylon bcf yarn on cones, polycarbonate sheet offcutts, dipped fabric stocks, HDPE regrind.
PET Bottle flake A grade MATERIAL : PET Bottle flake CATEGORY : PET TYPE : Bottle flake GRADE : A grade SPECIFICATION : PET bottle A grade ,cap/label removed. Origin : Indonesia
Rubber.