Generators made by ABB Output: 9500 kVA Voltage: 11000 V Frequency: 50 Hz Rotation speed: 750 rpm Number x 4 Made in 2016 Condition: New article 3 years warranty included There is also a generator of 7125 kva.
Second-hand Niigata company diesel generator set x 2 Generator manufacturer: Fuji Electric Capacity: 2555.6 kVA Voltage: 6600 V Current 224 A Hz: 60 Number of poles: 8 Operating time: about 58,665 h Manufacturer: Niigata Model: 12V26HX Output: 3275 PS Cylinder diameter: 260 mm Stroke: 275 mm Number of cylinders: 12 Rotational speed: 900 rpm Year of manufacture: 1998 Both sets are in good condition.
We would like to offer you a very unique water desalination system called Ozomix System, which is proudly made in Japan. There are 2 types: One for sea water, and the other one for fresh water. The most significant characteristic of this system is that it does not use any chemicals of chlorine in the pre-processing purification. Ozomix System is a compact water treatment device consisted of ozone processing and the reverse osmosis membrane processing. Machine Name: DUS-30D Target water: sea water Capacity par day: 30 ton Machine Name: DUS-100D Target water: sea water Capacity par day: 100 ton Machine Name: DUS-180D Target water: ground water, river water Capacity par day: 180 ton Please feel free to contact us for further information.
We would like to offer you a very unique water desalination system called Ozomix System, which is proudly made in Japan. This particular desalination system is desgined to be small size to be installed at ships. Also, this system is ideal for providing staff members with precious drinking water at oil rigging sites. The most significant characteristic of this system is that it does not use any chemicals of chlorine in the pre-processing purification. Ozomix System is a compact water treatment device consisted of ozone processing and the reverse osmosis membrane processing. Machine Name: DUS-10D Designed to be installed at ship Target water: sea water Capacity par day: 10 ton Please feel free to contact us for further information.Machine Name: DUS-10D Designed to be installed at ship Target water: sea water Capacity par day: 10 ton
Manufacturer: Tokyu Sharyo Model: TL90H7R2Y (Pallet trailer) Year: 2009 Total mileage: only 51km Location: Tokyo, Japan Serial Number: TL90H7R2Y-G001 Length: 11,650 mm Width: 3,500 mm Height: 2,490 mm Loading platform top position: 1,830 mm (in rising position) : 1,450 mm (in low position) Cargo bed length: 8,000 mm Vehicle mass: 20,090 kg Maximum payload : 70,000 kg Gross vehicle weight: 90,090 kg Tire size 10.00-20-14PR (I) Conventional pallet trailers transporting heavy items with 3 axis tend to wear tires quickly due to many turnings at factories. This pallet trailer is designed to avoid quick tire wear by having 16 wheel axle, which is suitable for transporting large items at steel processing or manufacturing factories.
Toshiba, Second hand injection molding machine Year: 1985 Machine type: IS2500DN-175L Mold clamping force: 2500 ton Releasing force:200 ton Tie bars distanceã??HxV:1800x1700 mm Plate sizeã??HxV:2800Ã?2600 mm Clamping stroke:2700 mm daylightï¼?MAXï¼?:3600 mm Mold thickness:900ï½?1900 mm Pushing forceï¼?hydraulicï¼?:60 ton Extrusionã??stroke:350mm
We would like to introduce very affordable and very light ability- enhancing suits. These suits with stainless steel springs installed inside help construction workers, care-takers, farmers or any other physical strength required workers lift up heavy items. Unlike heavy duty industrial exoskeletons, those suits are very light and very easy to put it on and take it off, and those suits are washable (made of Stretch mesh: Nylon 80 percent, Polyurethane 20 percent) and do not require any power. When lifting up a heavy item, the ability-enhancing suits enhance your back muscle by around 20 percent as well as reduces loading stress on your back and waist. Also, walking knee supporters are available. If you are interested, please contact us with your required size from the followings: Waist circumference Small size: 70-75 cm Medium size: 75-80 cm Large size: 80-85 cm LL size: 85-90 cm 3L size: 90-95 cm 4L size: 95-100 cm 5L size: 100-105 cm 6L size: 105-110 cm We also are looking for a sales representative for those suits and knee supporters. Please feel free to contact us. We look forward to your kind response.
Used cardboard box corrugator line x 1 unit (Year 1993), consisted of the following devices: Manufacturer, Machine type, the number of units -Isowa, Liner mill roll x 3 units -Isowa, EF. B Twin Facer SP 77 x1 unit -Isowa, Splicer x 3 units -Mitsubishi, Three-stage preheater x1 unit -Uchida, Gluer x1 unit -Mitsubishi, Heating Conveyor x1 unit -Isowa, NSE Slitter scorer x 1 unit -Isowa, Cutter x1unit Machine width: 1600mm Cardboard type: B flute, and E flute Current condition of the machines: still in the production and plans to be in the production until March, 2018.
· Manufacturer: Hitachi Plant Mechanics · Year: 2017 · Model: Overhead Crane Hoists · Rated load: 20 t Test: 25 t · Lifting load: 20.28 t · Lift: 18.495 m (FL plus 10.995 m, FL minus 7.5 m) · Span: 28.7 m · Winding: 0.125 m / s , 30 kw (inverter control) · Traverse: 0.3 m / s , 1.8 kw (inverter control) · Driving: 0.75 m / s , 2 x 5.5 kw (inverter control) · Power supply: 3-phase, 3 wire, 440 v, 60 Hz · Traverse rail: 22 kg / m rail · Traveling rail: 73 kg / m rail We could offer you another crane with similar specifications.
Maker: Mitsubishi Forklift Model: FD280 (Year 2016, Hour: 6.9 h) x1 unit Located in Japan Length: 9670 mm Width: 3680 mm Height with Mast lower positionï¼?5020mm Height with Mast upper positionï¼?6770mm Wheelbase: 4800mm Front tread: 2635mm Rear tread: 2750mm Lowest from the floor level (below the mast): 380mm Fuel tank: 480 litter Weight: 43670kg Engine: Mitsubishi 6D24-TCE1 Diesel engine Rated output/rotation speed: 224/2200Kw/rpm Max torque/rotation speed: 1135/1400 Nã?»m/rpm Displacement: 11.94 litter Tire: Front: 16.00-25-28PR (I) Double tire Rear: 16.00-25-28PR (I) Running capacity: up to 33.5 km/h Minimum turning radius: 6800mm Mast: Roller driven 2 step Panorama mast Tile: 6 degree and then 12 degree Fork Length: 2440mm Fork Width x Thickness: 320 x 110mm Attachment: Hydraulic Fork positioner with side shift Side shift (For right and left): 300mm Fork position range (Outer- Outer): 790-2840 mm Lifting Capacity: Load: 25000kg Load centering: 1250mm Max lifting: 3500mm Lifting speed: Empty 430mm/sec, with load 390mm/sec
Dâ??Arts and Designs producing and supplying various personalised items which are ideal of corporate gifts such as Jute Bags, Cotton tote Bags, Denim Bags, Non-woven bags, Drawstring Bags and Pouches, Cushions and Covers, Wine carriers, shopping bags, Aprons, Table Linen, Candle Holders, Metal Tin and Can etc.
Stationery, correction tape, glue tape, guard your id stamp, camouflage tape, staple-free stapler, stapler, punch, scissors, cutting knife, paper trimmer, magnet, finger pads, high capacity expandable file, clear pocket file, index sheets, clear folder, camouflage folder, clear folder, clear file, eraser, notebooks.
Japanese used cars and trucks parts and construction equipment, packing .Custom clearance
Adult diaper (Japanese brand), Pet food (Japanese brand), Used LCD Computer monitors(17"~22") and Other Used Computers, Used OTR and etc tires.Wholesale business, clearing agency
Brand: AnkhJet Country of origin: Japan Color: Dark-blue, Dark-red, Light-green Size: Approximately 23.5cm (height) x 29.5cm (width) x 13.5cm (depth) Weight: Approximately 730g Handle height: Approximately 13cm Shoulder strap: Fabric strap/Attached lizard leather/Maximum length approximately 130cm Material: Exterior/Lizard leather, Inside edge/Cow leather, interior/Beige nylon fabric Closure: Zipper Pockets: Two zipper pockets on both sides of the top, one open pocket on the back, one open pocket and one zipper pocket on the inside Zipper: Gold color
-Country of origin: Japan -Brand Name: AnkhJet -Color: Dark-blue, Dark-wine, yellow -Size: (approx.) Vertical 22.5 cm x Horizontal 27 cm x Depth 12 cm -Weight: (approx.) 600g -Closure: Fastener Specification -Shoulder strap longest: (approx.) 96 cm -Materials: Outer fabric, Material/Caiman leather, shoulder strap, Inside Top Gusset /Cowhide leather, Internal/Polyester fabric -Pocket: Front Back / open x 1, inside / open x 2, zipper x 1 -Metal fittings: Nickel -Fastener: Nickel metal
Made In Japan Brand name: AnkhJet Color: Green-pearl/ivory, Crystal gray/black, Crystal blue/ivory Material: front and back, Handle back/cowhide leather, Handle front, gusset decoration, exterior top edge/Diamond Python leather, Inside / nylon fabric beige (100% polyester) Size: (approx.) 30cm x 30cm x 2cm Weight: (approx.) 700g Pocket: Exterior Backside/ Fastener*1, Inside/open*2, fastener *1
Country of Origin: Japan Color: Lavender-pearl, green-pearl, white-pearl Size: (Approx.) Height 28cm x Width 27cm x Depth 17cm Weight: (Approx.) 600g Closure: Magnet and Zipper Longest Shoulder Strap Length: (Approx.) 96cm Material: Exterior/Python Leather, Shoulder Strap Exterior/cow-hide Leather, Interior/Nylon Fabric Pockets: Front/Zipper x 2, Interior/Open x 1, Zipper x 1 Zipper: Metal Nickel
-Origin of country: Japan -Brand: AnkhJet -Color: black, violet, chocolate, foiled oak -Country of origin: Japan -Size: Approximately 26.5cm (height) 30cm (width) 13cm (depth) -Weight: Approximately 500g -Handle drop: Approximately 21cm -Longest shoulder strap length: Approximately 130cm -Material: Front, back, handle front, zipper pull, gusset, shoulder strap attachment, upper part of the strap/ Diamond python leather, Handle back, bottom, inner piping/ Cow leather, Interior/ Nylon fabric -Pockets: Interior/ 2 open pockets, 1 zipper pocket -Closure: Zipper -Zipper: Gold
Country of Origin: Japan Color: Green-pearl, Crystal violet, Black, speckled oak, white-pearl, lavender-pearl, hand-dyed chocolate Size: Approximately 22.5cm (height) x 20cm (width) x 8cm (depth) Weight: Approximately 350g Shoulder Strap Length: Approximately 145cm (adjustable with 5 holes) Closure: Zipper Material: Exterior/Diamond Python Leather, Trimming, Back Pocket Lining, Strap, Inner Gusset, Inner Trimming/Cowhide Leather, Interior/Polyester Fabric Pockets: Front Flap/Open x 2, Back/Zipper x 1, Interior/Open x 1, Zipper x 1 Zipper: Metal Nickel
