Product Name : Men bracelets Product Code : PA373M Product Description : Bracelet man silver pattern. This, like our other and bracelets made with silver foil 925/1000 intertwined with each other, creating a flexible tube of rectangular shape. The effect that comes out is great, modern, we go out from the usual silver bracelets, for the closure is very practical, internally there is a steel spring that allows you to open and close it around your wrist, controlled more or less close. The size: 6 mm wide 3.00 mm thick we encourage it to 18.0 cm but you can request your size and the price does not change, only need 8-10 days to have it. Product Origin : Italy Key Specifications & Special Features : Silver bracelets Man bracelets men enamel and silver bracelets men to throttle, bracelets men's fashion, fashion silver bracelets, bracelets sporty silver, silver and rubber bracelets, antique silver bracelets, silver bracelets semi-rigid, hand-made bracelets men, silver chain bracelets.
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
REF. 2012202 The Company started to handbuild rowing and sailing boats used for fishing in 1849, basing the craft on the shape and form of the traditional Italian boat ''gozzo sorrentino''. Afterwards the boatyard was opened in 1983. Today, the Company is one of the most prestigious Italian sailing brands in the world, and it has a precise niche market among the lovers of luxury and exclusive boats, conjugating the old local tradition and the international modern class. The gozzos’ main characteristic is namely the double pointed hull with a very similar shape both in the bow and in the stern. The major innovative changes are the use of fiberglass for the hull while leaving all the other parts of the boat in wood and the keel which made possible to reach high speeds. The materials used for the furniture are extremely natural and classic, with a predominance of shiny and matt mahogany, Viennese straw and mirrored, chrome plated and steel hardware. The gozzos are finished with craftmade care, and, at the same time, provided with the most advanced structural elements. The products excel in terms of elegance, safety, performance, technology and comfort. All the boats are equipped with ARG anti - rolling system, which is a stabilization system to reduce the rolling effect of the waves. Matching the characteristic old style of the ancient boats with innovation, functional and aesthetic best solutions, a modern research department made up by designers, nautical engineers, architects and technicians, makes the boats some of the most innovative in the international nautical market. The Company wishes to get in touch with importers/wholesalers as well as representatives/agents from target countries which could be interested in importing and distributing the above products. Target Countries: United Arab Emirates, Brazil, Russia.
Noiseless and ecological electric vehicole/tractor. 16 Km/h. Direct use: you get on, drive and stop (movement dynamics). For all employees who move in a range greater than 100 mt. For quick repair service and transport of small-sized components. Average time saving of about 40 to 60 minutes per day. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - lightweight tubular plate traction - 105/125 Ah. - Built-in charger and automatic battery status. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft couplings with 6 quarries - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colors: white, red, green , yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. 10 Km/h. -offers two different advantages: it allows to move very quickly and transport up to 300 kg of materials by using a truck designed by us. Speedy, handy in narrow spaces, it spins around with the truck within a 200 cm radius allowing quick access to other departments. Quick repair and maintenance of big- sized and heavy materials (the truck is 120x80 cm with a carrying capacity of 300 kg). Allows to avoid using big and expensive vehicles to move small volumes of goods. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 123/143 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and charge indicator battery 24 volt 800 watt electric motor RR 1/10 - 24 volt electric motor permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. 2 Batteries 12 volt - tensile tubular plate - 102/157 Ah. - Built-in charger or external high frequency and automatic control of the state of charge. - Traction Chain gear ratio 1/10, 125 - Differential aluminum satellites treated steel - axle shafts with couplings 6 slot - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colours: white, red, green, yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. Moderate purchase price In these facilities, Bigà can be used for: - individual transport of personnel - control, inspection and security service - maintenance, cleaning and transport of small packages - towing with trucks up to 800 kg GENERAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover with 3.00-4 tires room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 800 watt - 24 volt 800 watt motor RR 1/10 - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - Traction tubular plate - 102/157 Ah - Built-in charger or external high frequency and automatic control of the state of charge. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft with grafts and 6 hp - Voltage reducer 24 to 12 volts for lighting system - Brake system: front disc brake, rear differential, brake lever on the left and enhanced engine braking from the calibration of the electronic control. - Blue color.
Electric cart SPECIFICATIONS: Dimensions: Total Length mm 930 Width mm. 650 Height mm. 1070 Floor Length mm 870 Width mm. Ground Clearance 620 mm. 330 Weights: Total kg including batteries. 77.90 Batteries kg. 13 each. x 2 Motor: Permanent magnet motor with electric 200 W - rpm 120 - 24 V electro 24VDC 2Nm. Voltage and batteries: no Two 12V batteries 32 A C5 sealed gel - series connection, without maintenance. External charger 24 v - 8 ampere - Electronic microprocessor - Power supply 220 v. Brakes: Electric brake block engine, listing in the event of power failure. braking on deceleration (engine braking) enhanced in the calibration of the parameters of the controller. Speed and Capacity (performance with the vehicle in perfect working order on flat surface: Max 5 Km / h + / - 10% Max 250 kg. terms and 100kg. slope of 15%. Maximum flow rate is considered with the load distributed uniformly on the floor. Tires: 2 wheels rubber tires mounted on rims with pneumatic 3.00-4 6-ply roofing. 2 wheels 200x50 diameter core polypropylene gray synthetic rubber ring mounted on swivel mounts. Frame: Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 6018 Spare parts and tools for the maintenance and repair: Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa. Sound level values: less than 70 dB (A)
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Electric small tower tractor. SPECIFICATIONS: Biga 'Pick-up versions and performance with the vehicle in perfect working on flat surface. type 13 max 5 Km / h + / - 10% P / T 800 kg. on the P / T 100 Kg on slope 15% Type 19 max 6,5 Km / h + / - 10% P / T 600 kg. Type 28 up to 8 Km / h + / - 10% P / T 400 kg. Type 34 up to 11 Km / h + / - 10% P / T 200 kg. The maximum range is considered with the load evenly distributed on the plane and the center of gravity of the goods must not exceed the height of mm. 350. Dimensions: Total Length mm 1540 Width mm. 740 Height mm. 1130 Floor Length mm 940 Width mm. Ground Clearance 740 mm. 310 Weights: Total including batteries and banks kg. 176th September 3 banks kg. Batteries kg. 36 each. x 2 Motor: permanent magnet motor RR 10/1 800 W - rpm from 330 to 24 V. N. 2 batteries 12V 140 A sealed gel - connected in series, without maintenance. External charger 24 v - 12 amp - electronic microprocessor - 220 v. transmission: Differential, max. 2 Kgm torque - 2 Shaft with graft rejection in 6 slot. chain drive with front and rear sprocket. Brakes: Front drum, drive with your right hand. Rear disk drive with his left hand. brake, drive on left lever. increased by releasing the brake (engine brake) enhanced in the calibration of the parameters of the controller. Covers: 3.00-4 rubber tires Frame: Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 9007. lighting and signaling devices : Headlight main and tail lights - reverse buzzer, horn. phonometric values: values ??LpAm max = 77.6 - 85.6 LWA - Attendant Leq dB (A) 77.6 Vibration value: vmax (i) = 0.47 m / s2 (maximum value for operator sitting in the driver's seat). Spare parts and tools for the maintenance and repair: Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa.
Alfalfa hay cut, dehydrated, in pellet or mixture, Comodity marble, iron ore, iron nickel, wood timber, steel slabs.Trading, brokerage services and commercial assistance
Sanitary bathtub, showers, heating systems, bathroom appliances, malleable iron and steel pipe fittings, valves and industrial components, flanges.Trading
Clothes, garment, steel, aluminium profile, building material, chemical.
Nails, steel fibers, galvanized wire panels.
Scrap metal, HMS1 and HMS 2, aluminum, steel, copper, brass, alloy wheels.Exporter
Home items such as accessories for curtains, curtain holdbacks, fringes for curtains, tassels, cords, bow curtain tiebacks, pompoms and magnets for curtains..Ship
Steel In Any Shape Forgings, Plates, Pipes, .
Sunflower oil, colza oil, steel, paper.
Catalytic converter scrap, copper wires scrap, abs scrap, pvc scrap, hdpe film scrap, ldpe film, tyre wire scrap, used electric motor scrap, motherboards scrap, used conveyor belt, tyres scrap, pvb film, pet film scrap, latex gloves, pa6 yarn, pet bottles scrap, pu foam scrap, eps blocks, copper cables scrap, compressor scraps, bopp film scrap, cast iron scrap, baby diaper scraps, used engines, tires scrap, tyres scrap.
Building materials & furnitures ceramic tiles , mosaics, italian marbles, faucets , bathrooms accessories , electric accessories , acoustic insulation rolls, plasterboard panels , rockwool panels, glassfiber mesh, geogrid mesh , geotextile mesh, polyurethane (pur) panels, canadian / portuguese roof tiles, rubber , vinyl floors, furnitures health care, furniture for bars, restaurants, common areas..
Barrels.
