Pasta of durum wheat semolina, whole peeled tomatoes, chopped tomatoes, tomato paste in all concentrations, canned legumes such as peas, beans, lentils, olive oil (including D.O.P. extra virgin olive oil), balsamic vinegar, pasta sauces, antipasti in glass jars (roasted artichokes, sun dried tomatoes, roasted tomatoes...), bruschettas (a wide selection that goes from the bruschetta of fresh tomatoes to a bruschetta of mushrooms.
Product Name : Bracelets Product Code : PA241B Product Description : A bracelet for certain aspects classic, totally in 925/1000 silver realized with shaped silver plate by a curvature upwards. It is then completed by a slight irregular stamping on and a modern finishing satin and diamond in the center. The central diamond you may not even have, just write it down in the "notes when filling out the contact form. The size of the bracelet: 45.0 cm long, 16.0 mm wide, sheet thickness: 1.0 mm The bracelet is rhodium but not white satin silver. Product Origin : Italy Key Specifications & Special Features : 925 silver bracelets, silver chain, semi-rigid bracelets in silver, silver bracelets and semi-precious stones, bracelets to silver pipe, tube twisted silver bracelets, silver bracelets and stones, gourmette chain bracelets, fashion bracelets in silver, handmade bracelets, silver and enamel bracelets.
The company manufactures: - Wires: a wide range of unipolar wires is used in products. Section goes from 0,09 mm2 to 50 mm2 and they are made of several materials like PVC, Teflon, AWG according to the UL-CSA, silicone with or without glass tubing. - Probes: temperature probes, Reeds or Hall effect wired probes or any kind of required wrapper like threaded bulbs, perforated bulbs, steel, brass, plastic bulbs, die-cast bulbs. The Company can also work on wrappers designed for a dedicated mould. - Power cables: the production also includes power cables with die-cast plugs/sockets of different types: Italy, Schuko, UK, IEC, Australia. - Cables: wirings with multipolar shielded and shieldless cables, for applications like data transmission, power and dynamic uses; standard wirings like Fror, PVC, LIYY, Silicone, Neoprene or custom-made wirings, according to particular applications . - Panelboards, according to customer’s plan. - Assemblings.
5 - Foot sheet chariot 5.1 Dimensions: Total length 930 mm Width 650 mm Height 1070 mm Plan Length Width mm 870 mm 620 mm Ground clearance 330 5.2 Weights: Total 77.90 kg including batteries Batteries 13 kg each. x 2 5.3 Motor: Permanent magnet motor with electric 200 W - rpm from 120 to 24 V electro 2Nm 24VDC. 5.4Voltaggio and batteries: N. 2 x 32 A 12 V sealed gel in C5 - series connection, maintenance-free. External charger 24 V - 8 amp - Electronic microprocessor - Power supply 220 V 5.5 Brakes: Electric brake to the engine block, insertion of a power failure. Braking on deceleration (engine braking) enhanced in the setting of parameters control unit. 5.6 Speed and Capacity (performance of the vehicle in perfect working flat route: Maximum speed in 6 seconds of continuous accelerated 5 km / h + / - 10% Max capacity 250 kg and 100kg in terms of gradient of 15%. The maximum flow is considered with uniformly distributed load on the floor. 5.7 Tyres: 2 rubber wheels mounted on wheels with pneumatic 3.00-4 6-ply roofing. 2 wheels 200x50 core diameter polypropylene ring mounted on gray synthetic rubber supports swivel. 5.8 Structure: Tubular and sheet S 235 JR polyester powder coated RAL 6018 external 5.9 Spare parts and tools for maintenance and repair: The original spare parts and tools for maintenance and repair are provided directly Order by Biga spa Italy. 5.10 Values sound level: less than 70 dB (A) 5.11 Environmental conditions: temperature + 5 + 40 C Humidity 50%.
r control is designed to Optimize the charging cycles for any type of battery, 230v coil single-pole contactor, D.C. Fuse on rectifier output, delta-star stray flux single-phase power transformer Class h; impregnated in autoclave with ecological epoxy resins, with thermocouples For disconnection due to maximum temperature, single-phase rectifier bridge with Silicon diodes, natural cooling, with snubber protection, mains input and d.C. Output Polarized cables, modular installation on galvanized steel base, sheet steel case with Modular panels so as to assure maximum accessibility in case of service, epoxy Powder coating, oven-baked, standard colour: ral 2002 red, new lexan plate with Charging data very easy to understand, equalized recall push button, on - off push Button, option to adjust the charging time from 90 to 210 minutes, option to adjust The threshold voltage from 2.3 to 2.4 v/cell., equalization charge timed, led signaling Charging phases or result, short check of functions and times, option to program The equalized charge automatically, lab-tested electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, option: custom-made color, logo and Silk-screen printing, option: assembly of plugs and battery connectors on request.
With decreasing Current (wa characteristic): 9÷11 h charging time, transformer thermal protection, Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked, Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen Printing, mains input and d.C. Output polarized cables, complete with mains And battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of the final charge at 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging Time (equalization charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from charge end, duration Of equalized charging phase: each hour 5’ (repeated for 48 hours), Calculation to determine the size of suitable battery charge: 16a for Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Technical sheet Biga’ pick-up: Dimensions: Total Length mm 1541 Width mm. 740 Height mm. 1120 Worktop length mm 95 Width mm. 740 Height from the ground mm. 310 Weight: Total including batteries and banks kg.156 Set 3 banks kg. 4 Batteries kg. 27,5 each x 2 Gear Motor: Permanent magnet engine R.R. 10/1 800 W – rpm 330 – 24 V. Voltage and battery: N. 2 batteries capacity 12V 140 A C20 hermetic gel– connected in series, no maintenance. External battery charger 24 v – 12 amp – electronic microprocessor control- Power 220 v. Differential and transmission: Differential, maximum torque of torsion 2 Kgm - 2 Semiaxis with graft at 6 caves Type 13: transmission chain, Sprocket 13 teeth, Crown wheel 45 teeth, Ratio 1/3,47 Type 19. transmission chain, Sprocket 19 teeth, Crown wheel a 45 teeth, Ratio 1/2,37 Type 23: transmission chain, Sprocket 23 teeth, Crown wheel 45 teeth, Ratio 1/2,00 Type 28: transmission chain, Sprocket 28 teeth, Crown wheel 45 teeth, Ratio 1/1,61 Type 34: transmission chain, Sprocket 34 teeth, Crown wheel 45 teeth, Ratio 1/1,33 Brakes: Front drum brake, activation with right hand Back drum brake, activation with left hand Service brake, activation on left lever. Braking increase by the release of the accelerator (engine brake) enhanced in the setting of the parameters of the junction box. Speed and capacity: Towing besides the driver (performance with the vehicle in perfect efficiency) on flat road. The maximum capacity is considered with uniformly distributed load on the worktop and the center of gravity of the goods must not exceed the height of mm. 350 Type 13 max 5 Km/h +/- 10% P/T 800 kg. on the plane P/T 100 Kg. on slopes 15% Type 19 max 6,5 Km/h +/- 10% P/T 600 kg. on the plane Type 23 max 8,5 Km/h +/- 10% P/T 450 kg. on the plane Type 28 max 10,5 Km/h +/- 10% P/T 300 kg. on the plane Type 34 max 12 Km/h +/- 10% P/T 200 kg. on the plane Tires: Covering: 3.00-4 superelastic rubber Structure: Tubular and sheet Fe 37 polyester powder painted for outdoor use Ral 9007 Lights and Devices: signaling and illumination main headlight and tail lights reverse buzzer, horn.
Semiautomatic filling machine stainless steel made, mounted on wheels. The unit has limited overall dimensions. â?¢ Linear filler with 2, 4 or 6 filling valves for gravity filling of all flat products as wine, spirits, juices, water... â?¢ Filling valves with diam. 15mm (smaller or larger valves are available on demand for special use) Simple adjustment of the filling levels inside the bottle by means of quick-insertion spacers Pneumatic bottle seats lifting with height adjustment to fit different bottles. The up / down timing of the bottle seats can be adjusted according to the volume of the bottle, by means of timers: This system allows to adjust the filling timing, once the bottles are filled up the bottle-seats are lowering down. The time can be reduced when filling small bottles, to increase the production output. Product infeed with electric valve in stainless steel controlled by measuring probes. Electrical control panel predisposed for controlling the pump for the product. Controls and protection, all complying with EEC regulations. Possibility to fill glass bottles from 0,375 to 1,5 litres (bottles samples to be provided for confirmation) Supply: electric power and compressed air. OUTPUT : approx 600 x 75cl bottles/hour
Icroprocessor control is Designed to optimize the charging cycles for any type of battery, single mains input Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output, Delta-star stray flux single-phase power transformer, tenvex copper windings with Double enamel insulation; class h; impregnated in autoclave with ecological epoxy Resins, with thermocouples for disconnection due to maximum temperature, singlephase Rectifier bridge with silicon diodes, natural cooling, with snubber protection, Mains input and d.C. Output polarized cables, modular installation on galvanized Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10, Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral 2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic Compatibility and ce marking, equalization charge timed, automatic start, automatic Disconnection of battery charger due to battery disconnection, smart charging system According to the discharge level of the battery, short check of functions and times, Option: custom-made colour and custom-made logo and silk-screen printing, final Acceptance test conforming to safety regulations, charging with decreasing current (wa characteristic): 9÷11 h charging time, charging with decreasing current (wo - Wa characteristic): 7÷8 h charging time, complete with mains and battery cables; Assembly of plugs and battery connectors on request.
Ptek nre3 three phase is designed to recharge medium - large capacity traction And start lead-acid batteries, developed using our forty-year experience in the field Of battery chargers and multi-years application of microprocessor control systems D electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, equalization charge based on Time, charging with decreasing current (wa characteristic):9÷11 h charging time, Transformer thermal protection, modular installation on galvanized steel base, sheet Steel case with modular panels, epoxy powder coating, oven-baked, standard color: Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains Input and d.C. Output polarized cables, complete with mains and battery cables; Assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge). It will start after 55’ from charge end, Duration of equalized charging phase: each hour 5’ (repeated for 48 Hours), calculation to determine the size of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek nr3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of Battery chargers and multi-years application of microprocessor control systems which On, short check of functions and Times, option to program the equalized charge automatically, lab tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, equalization Charge based on time, charging with decreasing current (wa characteristic): 9÷11 H charging time, transformer thermal protection, modular installation on galvanized Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen Printing, mains input and d.C. Output polarized cables, complete with mains and Battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah Battery: 16ax5 = 80a).
ier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic Start, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002 red, option: custom-made colour, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request. “WA” CHARACTERISTIC (DIN 41774): charge at decreasing current with intervention of the final charge at 2.40 V/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization charge (week-end charge) to be recalled. It will start after 55’ from charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable battery charge: 16A for every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
disposable 3 ply face mask is made of 3-layers,inside and outside layers are PP non woven,middle layer is high standard N95/N98 filter paper. 1.Size:17.5x9.5cm, 2/3-PLY. With Ear-loop and tie on style. 2. Very low resistance to breathing,free from foreign smell,without any stimulating feeling. 3. Nose bar can be adaptable,comfortable,without glass fibres,latex free. 4. PFE(Filtration efficiency of non oily particles)â?¥30%. 5. BFE(Bacteria filtration efficiency)â?¥95%(99%). 6. Use ultrasonic welding technology, comfortable wearing. 7. white,blue,green,red,pink,yellow can be available. Specification: 1.Directly manufacturer, disposable face masks, any colors. 2.NELSON,ISO,CE, BFE>99%,type II /Type IIR standard. 3.Capacity: 1000,000pcs/day, 1*40HQ can be finished within 8-15 days; 4.Laxet free ,easy breath, eco friendly, OEM packing design, service in 24 hours. Packaging 1)50 pieces per box, 40 boxes & 2000 pieces per carton 2)1 piece per bag, 50 pieces per box, 40 boxes & 2000 pieces per carton Store in a dry, cool place (
Pulse hot press used in product manufacturing process: soft line FFC and soft circuit board of FPC or rigid circuit board welding of PCB, TCP and PCB circuit board or a soft circuit board of FPC between the welding, soft circuit board of FPC and PCB between the circuit board welding etc The product is used in welding pulse hot pressing machine and it is pulse heating welding, through the pulse current heating thermocouple transmission to joint parts in close contact, without the heat effect on peripheral devices This product is used in pulse welding machine, It is the pulse welding Heating body, It by thermocouple transmission pulse electric current to Heat, make the joint part is in close contact condition, with no heat Affected around the device. Usage: Our products are widely used in various electronic components with a Small coil manufacturing production, Used in high-frequency Communications components, SMD transformers, SMD chip inductors, Winding inductanceï¼?Coil inductors,miniature,Speakers, induction IC card, Proximity card,Proximity key,RF Inlay smart card,buzzers, receivers, speakers, headphones, Antennas, microphones, transducers, hands-free headset, vibration Motor, micro-motors, clocks coil, the coil module and other small Electronic components soldered contacts and also can weld metal wire, Metal strip, metal sheet, a solar cell, the data lines, Telecommunications lead solder contacts. Welding head classification: 1. Resistance Welding Heads 2. Spot Welding Heads, 3. Butt Welding Head, 4. Hot Bar Reflow Soldering Heads 5. Ultrasonic Welding Machine Welding Head Note: Document prices and pictures are for reference only, We will according to customers drawings or samples of spot welding head for quotation. Advantage: Pulse hot press mainly used in normal SMT reflow oven should not perform welding device for welding operation, and the use of iron welding is easy to occur when welding appearance inconsistent, uneven, prone to dry and easy to weld the bad products. While the pulse hot press is different from the temperature soldering iron, pulse hot press in electrified instantly achieve the desired temperature, and once the head ends without voltage, instantly to reach room temperature; and the welding head flat, so the welding flat appearance, rarely weld bad.
Air conditioner, wash machine, film stretch, latex gloves, parquet, boilers.
Garments, towels, bed sheet .
Bevelling machine 10 wheels as is With washer Min. Dim.: 110x110 mm (40x40 with special device) Thickness: from 3 to 25 mm
Cnc work center 4 Axis Kit for engraving and bevelling Max dimensions 2180x2935 mm Thickness 3-50 mm Electrospindle: - Speed 15.000 rpm - Power 13,5 kW Max tool diameter 150 mm Power 24,75 kw
