Hydraulic top link with shock absorber Antonioni mod. 3A 070 complete with quick release for tractors with power from 150Hp to 200Hp INTERNATIONAL PATENT PENDING Hydraulic top link with shock absorber of 70mm bore complete with quick hitch FEATURES Innovative Hydraulic Top Link with integrated gas accumulator, complete with damping device With high quality Waltersheid quick hitch or available with fork attachment long and short version Interchangeable with standard models Installation requires no special components and no additional clearances are required
Hydraulic top link with shock absorber mod. 3A 105 complete with Walterscheid quick release for tractors with powers between 200 and 300Hp The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties. The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment. The installation requires no special components and no additional spaces are required We remind you that this accessory brings the following ADVANTAGES: + Comfort: protects the operator from blows from jumping implements during transport + Efficiency: increases front axle grip + Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings + Safety: improves the traction of the tractor while driving on the road by absorbing shocks + Productivity: Reduced travel times on the road and in the field - Maintenance: important reduction in maintenance costs of the tractor and of the operating machines  due to less wear on the components
Hydraulic top link with shock absorber mod. 3A 120 complete with Walterscheid quick release for tractors with powers between 300 and 400Hp IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties. The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment. The installation requires no special components and no additional spaces are required We remind you that this accessory brings the following ADVANTAGES: + Comfort: protects the operator from blows from jumping implements during transport + Efficiency: increases front axle grip + Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings + Safety: improves the traction of the tractor while driving on the road by absorbing shocks + Productivity: Reduced travel times on the road and in the field - Maintenance: important reduction in maintenance costs of the tractor and of the operating machines� due to less wear on the components
Tractors, combines, agricultural machinery, .Producers/manufacturers and shipping.
Car Seat Covers, Car Mat, Car Sunshades, Lubricants, Car Batteries.
EC FERTILIZER Magnesium sulphate COMPOSITION - Magnesium oxide (MgO) soluble in water 16% - Sulfur dioxide (SO3) soluble in water 32%
Hydrogen automotive, magnetic train.Automotive manufacturer
Duracell, dove spray, toiletries.
Flexible Food Packaging, for all types of food, biscuits, chips, coffee, pasta, rice, ice cream, vegetables, cereals, milk, tetrapack, yogurt, chocolate, sweets, snacks, frozen products, refrigerated products, etc. We supply printed and neutral material in reels or in single pieces, such as envelopes and bags.
Product as in photos.
The stainless steel tubes we supply are distinguished in rounds (welded or seamless), squares and ovals available in different length, diameter and thickness. As for the other types of products, the stainless steel tubes that Nour Eddine supplies include peeled, hot rolled, brushed, polished, cold drawn and centerless ground according to different standards, qualities and tolerances. Product type: 304 - 304L, 316 - 316L, 321, 310 / S
We have a wide range of stainless steel sheets in different sizes and qualities. The sheets and flats that we normally supply include cold drawn, hot rolled and forged according to the main industry standards. Product type: 304 - 304L, 316 - 316L, 430, 441
NOUR EDDINE is highly specialised in the scrap metal recycling process, a cornerstone of the company's main activities. We represent a point of reference for various foundries in the national territory supplying different types of scrap as raw material essential for re-use in the production process. The scrap that the company collects and distributes includes the main types of alloy steel. Scarp products: 304 - 304L, 316 - 316L, 420, 430; R50-65
Square edge profile rondcube is thealuminium edging profile for modern design of outside corners as well as providing a perfect protection for edges. The square shape provides a perfect right-angle finish. Square edge design matches protection and decorative solution thanks to a long-lasting beautiful appearance of its metal colours, old style copper, height tech titanium and metal finishing effect, brushed and chromed. Square edge rondcube is available into aluminum and stainless-steel. Available into 10, 12, 5 mm height and into 2, 50 mt length. Aluminum square edge rondcube is treated against corrosion by anodic oxidation and subsequently colored by anodic dye bath. Fully resistant against atmospheric agents even if used outdoors and against scratches and blows.
Granite, marble, waterjet garnet mesh 80 and 100.
Fuses and fuse holders for automotive.
Pneumatic and automotive components.
Locomotive, wind datalogger, PLC software, industrial automotion.
Semiautomatic filling machine stainless steel made, mounted on wheels. The unit has limited overall dimensions. â?¢ Linear filler with 2, 4 or 6 filling valves for gravity filling of all flat products as wine, spirits, juices, water... â?¢ Filling valves with diam. 15mm (smaller or larger valves are available on demand for special use) Simple adjustment of the filling levels inside the bottle by means of quick-insertion spacers Pneumatic bottle seats lifting with height adjustment to fit different bottles. The up / down timing of the bottle seats can be adjusted according to the volume of the bottle, by means of timers: This system allows to adjust the filling timing, once the bottles are filled up the bottle-seats are lowering down. The time can be reduced when filling small bottles, to increase the production output. Product infeed with electric valve in stainless steel controlled by measuring probes. Electrical control panel predisposed for controlling the pump for the product. Controls and protection, all complying with EEC regulations. Possibility to fill glass bottles from 0,375 to 1,5 litres (bottles samples to be provided for confirmation) Supply: electric power and compressed air. OUTPUT : approx 600 x 75cl bottles/hour
Semiautomatic filling machine for Bag-in-Box can fill bag sizes starting from 2 to 20 liters. It is designed to fill foodstuff or other kind of liquid and semi-dense products (eg. wine, oil up to a maximum viscosity of 300 cps). Is possible to make hot-fill temperatures up to 45�?�° with a pump 80 lt/min. Dosing is made with electronic flow meter. The machine is equipped with: * a control panel which manages the filling volume, the vacuum time, nitrogen time, to start the filler cleaning and also can be stored ormats customized according to your needs, finally giving a statistic of the work performed. * vacuum switch with which is possible to realize the control faulty bags; * an inclined surface adjustable with rollers (or smooth surface) to help the descent of the bag into the box; * stainless steel frame on pivoting wheels, two of them with brake; * surface adjustable in height for boxes placement; * a system for nitrogen injection. BOTTLING HOUR CAPACITY : Capacity Output 3 lt...................160/180 bb/hour 5 lt.................. 130/150 bb/hour 10 lt.................110/130 bb/hour 15 lt...................90/110 bb/hour 20 lt...................80/100 bb/hour