The sweet soap of the tradition, totally vegetable, is born from the saponifiation of vegetable oils of first quality, hence its typical colouring of white paste obtained without the use of optic whitening (dioxide of titanium). The high percentage of fat acids. (80%) and the addition of tuscan extra virgin olive oil in the phase of finish of the soap makes this delicate product to a daily ally for the care. And the personal hygiene. The high qualitative standard of production is constantly controlled in our laboratories of analysis. The soap is totally biodegradable and isn't tested on animals. The presence of the tuscan extra virgin olive oil enriches further the soap and makes it even more moistening and nutritious for the skin. The creamy and not aggressive foam cleans in effective but delicate manner. The precious essences with which the scent is composed are the results of many years of studies on the good perfumes of the tradition.
Advantages of hf technology: Optimal availability for use and long Service life can only be achieved from Motive power batteries when the battery And the charger are perfectly matched. The hf technology provides: Compact wall-mounted designs to save Floor space. Significantly higher electrical Performances. Shorter recharge time, Saving energy, reduction of the batteries Temperature during the cycle, strong Reduction of the co2 emissions, lower Water consumption, which helps prolong The life of the batteries. High production Yield. Soft start mode, customized Charge curve on request. Black hawk is a Versatile device, different charging curve Software could be installed for a specific Customized charging profile for any type Of battery. Usage: suitable for the cyclic recharge Of lead - acid batteries and floating of Sealed gel and / or lead - acid batteries. Optional air pump available Download data available Trough pc/laptop. 230 vca ± 10%, mono-phase, input frequency 50 – 60 hz, efficiency ~ 90%, Operating temperature from– 20 to + 45 °c, current drawn by the battery 0 A if network electrically bonded, protection against output short-circuit with Fuse, protection against polarity reversal with Fuse, thermal protection semi-conductors, input Protection with fuses and varistors, charge curve Programming and settings at will with default iu Ia, displaying and messages with monochromatic 2x20 lcd display – led, audible alarm device, State charge indicator multicolours, thermal Compensation with optional probe, 2 auxiliary Contacts optional configuration at will (mains Presence, finished charge, control pump, etc…), Ventilation forced air circulation, metallic ontainer With dimensions 490 x 360 x 150 mm, weight 11 kg, protection ip20, in conformity with the Low voltage directive 73/23/cee and the emc Directive 89/336/cee and their successive Amendments.
Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, mass-produced Mains leads, input cable, connection to the battery Through anderson-rema power terminals. Nfm Switching battery charger, high frequency technology, Fully controlled by microprocessor. 240v single-phase +- 10%, luminous display for a Easy reading of the charging parameters. Different charging curves in accordance with the kind Of battery and choose among 16 standard curves, Preprogrammed valid for pb-acid, gel. Battery voltage and charge current can be changed Through the button in the front panel. “soft start” mode and display of the charging cycle With led . Electronic protection and/or fuse against short circuits Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, mass-produced Mains leads, input cable, connection to the battery Through anderson-rema power terminals. Nfc Switching battery charger, high frequency technology, Fully controlled by microprocessor. 240v single-phase +- 10%, luminous display for a Easy reading of the charging parameters. Different charging curves in accordance with the kind Of battery and choose among 16 standard curves, Preprogrammed valid for pb-acid, gel. Battery voltage and charge current can be changed Through the button in the front panel. “soft start” mode and display of the charging cycle With led . Electronic protection and/or fuse against short circuits Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, error code Display missing, mass-produced input network cable, Output cables polarized.
Advantages of hf technology: Optimal availability for use and long s Temperature during the cycle, strong Reduction of the co2 emissions, lower Water consumption, which helps prolong The life of the batteries. High production Yield. Soft start mode, customized Charge curve on request. Black hawk is a Versatile device, different charging curve Software could be installed for a specific Customized charging profile for any type Of battery. Usage: suitable for the cyclic recharge Of lead - acid batteries and floating of Sealed gel and / or lead - acid batteries. Optional air pump available Download data available Trough pc/laptop. 400 vca ± 15%, three-phase, input frequency 50 – 60 hz, efficiency ~ 90%, operating Temperature from– 20 to + 45 °c, current drawn by the battery 0 a if network Electrically Bonded, protection against output short-circuit with fuse, protection against polarity Reversal with fuse, thermal protection semi-conductors, input protection with fuses And varistors, charge curve programming and settings at will with default iu ia, Displaying and messages with monochromatic 2x20 lcd display – led, audible alarm Device, state charge indicator multicolours, thermal compensation with optional Probe, 2 auxiliary contacts optional configuration at will (mains presence, finished Charge, control pump, etc…), ventilation forced air circulation, metallic ontainer with Dimensions 490 x 360 x 150 mm, weight 20 kg (air version 23kg - 503x490x153 Mm), protection ip20, in conformity with the low voltage directive 73/23/cee and The emc directive 89/336/cee and their successive amendments.
Midotec Olivo Granular NPK fertilizer with stabilized ammonia nitrogen and potassium sulphate Characteristics : The Midotec Olivo product is specifically designed to meet the needs of specific crops. It is unique and different from others npk fertilizers thanks to the presence of ammonia nitrogen, that is stabilized by the nitrification inhibitor 3,4-dimethyl pyrazole phosphate (DMPP 3.4. ). It inhibits the bacteria responsible for nitrification, thus slowing the conversion of ammonia to nitric acid for few weeks. This phenomenon fosters the stabilization ammonia nitrogen in the soil thus making it available for a longer period. The product must be spread over the entire surface or only along the row for drop dressing or basal dressing. Composition : Midotec Olivo Nitrogen (N) total, 20 Nitrogen (N) nitric , 8,7 Nitrogen (N) ammonia 11,3 Phosphorus pentoxide (P2O5) soluble in the, 12 AC Phosphorus pentoxide (P2O5) soluble in water, 10 Potassium oxide (K2O) soluble in water, 10 Sulfur trioxide (SO3) soluble in water, 10 Nitrification inhibitor DMPP, 1% of ammonia nitrogen Technical parameters and physical chemistry : MIDOTEC OLIVO presents a maximum content in chlorine (Cl) equal to 0.2%. Potassium sulphate pH of the solution at 5% = 5-5.4 Particle size: from 3 to 4.5 mm Absence of inert matter Presence of cmicroelements that improve the nutritional action Dosage and method of use Fruit trees: 4-6 q.li/ha Horticultural crops in open field: 4-6 q/ha Flower crops and ornamentals: 7-8 q/ha Horticultural crops in the greenhouse: 5-6 q/ha Screw: 4-5 q/ha
Midotec Vite Granular NPK fertilizer with stabilized ammonia nitrogen and potassium sulphate Characteristics : The Midotec Vite product is specifically designed to meet the needs of specific crops. It is unique and different from others npk fertilizers thanks to the presence of ammonia nitrogen, that is stabilized by the nitrification inhibitor 3,4-dimethyl pyrazole phosphate (DMPP 3.4. ). It inhibits the bacteria responsible for nitrification, thus slowing the conversion of ammonia to nitric acid for few weeks. This phenomenon fosters the stabilization ammonia nitrogen in the soil thus making it available for a longer period. The product must be spread over the entire surface or only along the row for drop dressing or basal dressing Composition : Midotec Vite Nitrogen (N) total, 12 Nitrogen (N) nitric , 5 Nitrogen (N) ammonia, 7 Phosphorus pentoxide (P2O5) soluble in the AC, 8 Phosphorus pentoxide (P2O5) soluble in water 6,5 Potassium oxide (K2O) soluble in water 25 Sulfur trioxide (SO3) soluble in water 15 Nitrification inhibitor DMPP ,1% of ammonia nitrogen Technical parameters and physical chemistry : MIDOTEC VITE presents a maximum content in chlorine (Cl) equal to 0.2%. Potassium sulphate pH of the solution at 5% = 5-5.4 Particle size: from 3 to 4.5 mm Absence of inert matter Presence of microelements that improve the nutritional action to the benefits of the plant. Dosage and method 'of use : Fruit trees: 4-6 q.li/ha Horticultural crops in open field: 4-6 q/ha Flower crops and ornamentals: 7-8 q/ha Horticultural crops in the greenhouse: 5-6 q/ha Screw: 4-5 q/ha
Midotec Agrumi Granular NPK fertilizer with stabilized ammonia nitrogen and potassium sulphate Characteristics : The Midotec Agrumi product is specifically designed to meet the needs of specific crops. It is unique and different from others npk fertilizers thanks to the presence of ammonia nitrogen, that is stabilized by the nitrification inhibitor 3,4-dimethyl pyrazole phosphate (DMPP 3.4. ). It inhibits the bacteria responsible for nitrification, thus slowing the conversion of ammonia to nitric acid for few weeks. This phenomenon fosters the stabilization ammonia nitrogen in the soil thus making it available for a longer period. The product must be spread over the entire surface or only along the row for drop dressing or basal dressing Composition : Midotec Agrumi Nitrogen (N) total, 13 Nitrogen (N) nitric , 6 Nitrogen (N) ammonia , 7 Phosphorus pentoxide (P2O5) soluble in the AC, 13 Phosphorus pentoxide (P2O5) soluble in water, 11 Potassium oxide (K2O) soluble in water, 20 Sulfur trioxide (SO3) soluble in water, 15 Nitrification inhibitor DMPP 1% of ammonia nitrogen Technical parameters and physical chemistry : MIDOTEC Agrumi presents a maximum content in chlorine (Cl) equal to 0.2%. Potassium sulphate pH of the solution at 5% = 5-5.4 Particle size: from 3 to 4.5 mm Absence of inert matter Presence of microelements that improve the nutritional action to the benefits of the plant. Dosage and method 'of Use Fruit trees: 4-6 q.li/ha Horticultural crops in open field: 4-6 q/ha Flower crops and ornamentals: 7-8 q/ha Horticultural crops in the greenhouse: 5-6 q/ha Screw: 4-5 q/ha
Ptek nre3 three phase is designed to recharge medium - large capacity traction And start lead-acid batteries, developed using our forty-year experience in the field Of battery chargers and multi-years application of microprocessor control systems D electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, equalization charge based on Time, charging with decreasing current (wa characteristic):9÷11 h charging time, Transformer thermal protection, modular installation on galvanized steel base, sheet Steel case with modular panels, epoxy powder coating, oven-baked, standard color: Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains Input and d.C. Output polarized cables, complete with mains and battery cables; Assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge). It will start after 55’ from charge end, Duration of equalized charging phase: each hour 5’ (repeated for 48 Hours), calculation to determine the size of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek nr3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of Battery chargers and multi-years application of microprocessor control systems which On, short check of functions and Times, option to program the equalized charge automatically, lab tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, equalization Charge based on time, charging with decreasing current (wa characteristic): 9÷11 H charging time, transformer thermal protection, modular installation on galvanized Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen Printing, mains input and d.C. Output polarized cables, complete with mains and Battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah Battery: 16ax5 = 80a).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Starter batteries (car/truck), classic cars, light traction, heavy traction, motorcycle, marine, army, industrial use and services. batteries with acid or dry charged, agm, gel, lithium batteries, for every need..
Colour: Creamy white Flavour: Characteristic, non-rancid, nor acid, nor tallowy Odour: Fresh, non-rancid, nor acid, nor tallowy Appearence: Amorphous powder, free from lumps except those easly broken, without visible scorched particles. In solution, it should not be present in a coagulated form, nor with fat separation on the surface
HYDROALCOHOLIC GEL for HAND Hygiene in a practical pocket format: 50ml GEL SMALL BOTTLE With your own LABEL and/or LOGO Ingredients: Alcohol 65%, Benzalkonium Chloride max 0,1%, Chlorexidine Gluconate max 0,3%, TEA TREE OIL, HYALURONIC ACID, ALOE Also available the 100ml - 250ml - 500ml - 1.000ml - 5.000ml both GEL and SPRAY. Exceptional quotations
50 ml, 100% Made in Italy. Dermatologically testedFinalist at the pure beauty global awards as Best New Premium Skin Care Product. Product with a fresh and light texture, with an anti-ageing and revitalising action, which, thanks to the biopeptide-based technology, helps reduce the depth and number of wrinkles in a few days. The efficiency of the cream in ensured by biotechnological bio-peptides and oxygenant glycoproteins, amino acids and phytoceramides that are particularly effective in donating a young, fresh and radiant appearance to the skin. Hyaluronic acid forms a thin film that smoothens and makes the skin silky. Precious organic oils of mosqueta rose and baobab, wisely mixed with shea butter and almond oil, nourish the skin leaving it soft and hydrated. The lightness of its texture is suitable for all types of skin, especially for oily and mixed ones. Use: apply morning and evening on clean skin, spreading the product from the inside to the outside of the face, neck and neckline, until completely absorbed. For a more nutritious action use the light moisturising face cream in the morning and the rich nourishing face cream in the evening.
50 ml, 100% made in Italy, finalist at the pure beauty global awards Amsterdam 2020 and pure beauty awards London 2020 . Cream with a soft and rich texture with an anti-ageing, nourishing and smoothing action. A valid ally that helps to effectively fight the signs of age and fatigue that cause loss of facial tone. ACTIONS / BENEFITS It reduces the depth of expression wrinkles thanks to the anti-ageing peptide Smoothes and moisturises the skin thanks to hyaluronic acid that fills the intercellular spaces of the skin and acts as a water reserve. counteracts the harmful effects of atmospheric agents such as ozone, pollution, UV radiation thanks to the anti-pollution factor and the antioxidant properties of natural oils nourishing and elasticising action thanks to the mixture of precious vegetable oils PEG FREE PARABEN FREE â?? MINERAL OIL FREE â?? CLINICALLY TESTED
250 ml, 100% made in Italy. Silky and soft cream, easily applied and absorbed, designed to elasticise and restore the firmness of the skin it in depth. The key active ingredient of the formula is a particular peptide complex that stimulates the synthesis of collagen and elastin, which are fundamental structures for supporting the skin and which, in synergy with hyaluronic acid, give the skin vigour and elasticity. Thanks to its advanced formula, this emulsion works on several levels: the skin is nourished and smoothed on the surface and rebuilt in depth. Five vegetable oils nourish, tone up and elasticise the tissues. Its power, evident from the first application, intensifies with daily use, favouring results in a short time. Apply the cream twice a day and lightly massage the affected area with circular movements until the product is completely absorbed. Ideal for preventing and improving the appearance of stretch marks.
DIVINITY ANTI-AGE BOOSTED SERUM ANTI AGE TO BE YOUNG (WITHOUT SURGERY) IS POSSIBLE DIVINITY ANTI-AGE IS A BOOSTED SERUM FOR DAILY USE PRODUCING LIFTING, PLUMPING AND FIRMING. THANKS TO A MIX OF ACTIVE INGREDIENTS IT MAINTAINS EFFECTIVE ADVANCED ANTI-WRINKLING. WITHIN A SHORT TIME THE VISIBILITY OF THE WRINKLES DIMINISHES, THE SKIN IS SOFTER AND SMOOTHER. GOOD ALSO FOR ANTI-FATIGUE! SMOOTHS, FIRMS, ILLUMINATES ACTIVE INGREDIENTS: COMBINATION OF PEPTIDES AND ACTIVE PROTEINS, HYALURONIC ACID, COLLAGEN CERAMIDES, HYDROLYZED ELASTIN, GUARANA EXTRACT. 15ml TUBE RECOMMENDATIONS FOR USE: SPREAD DAILY WITH A LIGHT MASSAGE A FEW DROPS OF DIVINITY ANTI-AGE ON FACE AND NECK. CAN BE USED ALONE OR ELSE BEFORE EBE SYSTEM. IT IS ADVISABLE TO USE IT ALONE ONLY WHEN YOU WANT TO EXPLOIT ABOVE ALL THE TENSOR EFFECT AS INSTANT LIFTING EFFECT.
EBE SYSTEM SPF 20 EMULSION WITH ANTI-AGE SUBSTANCE ENJOY YOUR AGE EBE PROTECTS DAILY YOUR FACIAL SKIN, CONTRASTING THE SIGNS OF CUTANEOUS AGING, ATTENUATING THOSE ALREADY PRESENT AND PROTECTING THE ELASTICITY AND TURGIDITY OF THE TISSUES. THE PRINCIPAL EXCEPTIONAL INGREDIENT IS SNAIL SLIME IN MUCOPOLYSACCHARIDESWHICH ACT SYNERGICALLY WITH THE COLLAGEN, ELASTIN, GLYCOLIC ACID, ALLANTOIN AND THE VITAMINS GIVE REGENERATIVE POWER, ANTI-AGE AND SMOOTHING. SMOOTHES, REGENERATES, TONES ACTIVE INGREDIENTS: SNAIL SLIME EXTRACT, COLLAGEN, ARGAN OIL, SILK PROTEIN RECOMMENDATIONS FOR USE: DISTRIBUTE A LITTLE EBE SYSTEM ON YOUR FACIAL SKIN AND DECOLLETTE IN THE MORNING AND EVENING. LEAVE TO DRY FOR AN INSTANT. EXCELLENT WHEN USED WITH DIVINITY ANTI-AGE FOR AN ENHANCED LIFTING ACTION
EBE ACTIVE WHITENING ANTI-SPOTS DEPIGMENTATION CREAM IMMENSELY ILLUMINATED EBE ACTIVE WHITENING CANCELS THE SIGNS OF THE PAST. THE MARINE COMPOUND CONTAINED IN THIS FORMULA HELPS TO VISIBLY ELIMINATE THE ASPECT OF THE DARK SPOTS, DUE TO AGING, STRESS OR CUTANEOUS IMPERFECTIONS. HELPS TO MAINTAIN THE SKIN UNIFORM AND LUMINOUS THANKS TO POWERFUL ANTI-OXIDANTS. EBE ACTIVE WHITENING ANTI-SPOTS AND CORRECTOR MAKES THE COLOUR HOMOGENEOUS WITHOUT ANY IRRITATION. SUITABLE FOR ALL SKIN TYPES AND COMPLEXIONS. CLEARS, ILLUMINATES, EVENS ACTIVE INGREDIENTS: PLANKTON, ALOE EXTRACT, AHA COMPOUND, ARGAN OIL, HYALURONIC ACID 30 ml tube RECOMMENDATIONS FOR USE: SUITABLE FOR ALL SKIN TYPES AND INDICATED FOR EITHER DAY OR NIGHT USE, ALONE, TOGETHER WITH EBE SYSTEM OR ELSE DIVINITY ANTI-AGE. CAN BE USED ALSO ON DECOLLETE AND HANDS. AVOID CONTACT WITH EYES.
