Benefits of hf technology Optimal availability for use and long service life can only be Achieved from motive power batteries when the battery and The charger are perfectly matched. The hf technology permits: Compact wall-mounted designs to save floor space. Significantly higher electrical performances. Shorter recharge time, saving energy and a reduction of The batteries temperature during the cycle, also a strong Reduction of the co2 emissions and lower water consumption, Which helps prolong the life of the batteries. High production Yield. Soft start mode and a customized charge curve on Request. The three phase black hawk is a versatile device, Different charging curve software could be installed for a Specific customized charging profile for any type of battery. Application: Suitable for the cyclic recharge of lead - acid batteries and Floating of sealed gel and / or lead - acid batteries. Air pump available (optional extra) Download data available trough pc/laptop (optional extra)
10v and/or 220v as default. Each ptek rvhf battery charger is equipped with external aluminium cover box, Input cable and battery cables (for small one equipped with a fast connection Crocodile). Switching battery charger high frequency technology, feeding 100 ÷ 240v singlephase +- 10%, digital display only for d version, different charging curves selectable For pb-acid, gel, “soft start” mode, electronic protection and/or fuse against short Circuits over voltages, polarity reversal or anomalies, input cable, connection of the Battery included, inner self contained ventilation through forced air, efficiency > 85%, mass-produced mains leads.
The Company is located in Campania, in Southern Italy. This is the area that provides the source for Mozzarella di Bufala Campana - a pure, fresh cheese obtained directly by processing 100% whole milk from carefully selected buffalos reared on the best farms and from livestock raised in semi-free-range conditions and fed on grass, corn, fodder, hay, bran and straw. The organization owns a factory equipped with the most up-to-date equipment. This facility extends over an area of around 2,000 sq metres with a further 8,000 sq metres used for loading and unloading, car parking, etc. The Company main product is Mozzarella di Bufala Campana DOP in various shapes and sizes: - balls from 25-500g - plaits from 125-500g. - special formats on request up to 3kg in weight. The Company also produces - fresh, homogenized and pasteurized ricotta, - butter exclusively made from buffalo’s milk. Quality in the broadest sense of the term really is the main objective of the Company: quality of the product, quality of customer service, quality of raw materials, all complemented by an unflagging dedication to customer satisfaction. With a view to reaching this objective, the Company has attained the following quality certifications: - ISO (the International Organization for Standardization), Standard ISO 9001 - The Company is subject to a very stringent HACCP (Hazard Analysis and Critical Control Points) system, thus allowing its products to be exported to countries including France, Germany and the United States, where there are extremely strict regulations on the permission to import goods. - As a member of the Consortium for the Protection of Buffalo Mozzarella of Campania with PDO (Protected Designation of Origin) status, the organization is subject to further product certification. - BRC (British Retail Consortium) - IFS (International Food Standard) - The Company also complies with the provisions as laid down by regulation CE 178/2002 concerning product traceability along the production chain. The Company wishes to get in touch with importers and wholesalers interested in high quality and certified milk products from Southern Italy. Target Countries: Russia, China, Australia.
The portable digital Videodermoscopy system VIDEODERM P is a useful and complete device that joins together quality and comfort, reliability and simplicity of use. It is provided with a dermatological digital camera of high quality and extremely easy to handle: VIDEODERM P is the very first portable system with halogen lighting for clear and real images. Interchangeable polarized and immersion optics for magnifications: form 10x to 300x.The notebook is in the lead with its useful components like CD/RW and DVD/R and backup HD. Moreover it is provided with the software Videoderm for the acquisition and elaboration of images, management of visits and patients, personal data and several other functions for a complete analysis of the lesions. The digital Videodermoscopy system VIDEODERM P is unique and inimitable thanks to the comfort of a simple and little suitcase, the reliability of the camera and the intuitive and multi-functional software. VIDEODERM P is a versatile device for an employment in Videodermoscopy, Videocapillaroscopy and clinical documentation.
Advantages of hf technology: Optimal availability for use and long Service life can only be achieved from Motive power batteries when the battery And the charger are perfectly matched. The hf technology provides: Compact wall-mounted designs to save Floor space. Significantly higher electrical Performances. Shorter recharge time, Saving energy, reduction of the batteries Temperature during the cycle, strong Reduction of the co2 emissions, lower Water consumption, which helps prolong The life of the batteries. High production Yield. Soft start mode, customized Charge curve on request. Black hawk is a Versatile device, different charging curve Software could be installed for a specific Customized charging profile for any type Of battery. Usage: suitable for the cyclic recharge Of lead - acid batteries and floating of Sealed gel and / or lead - acid batteries. Optional air pump available Download data available Trough pc/laptop. 230 vca ± 10%, mono-phase, input frequency 50 – 60 hz, efficiency ~ 90%, Operating temperature from– 20 to + 45 °c, current drawn by the battery 0 A if network electrically bonded, protection against output short-circuit with Fuse, protection against polarity reversal with Fuse, thermal protection semi-conductors, input Protection with fuses and varistors, charge curve Programming and settings at will with default iu Ia, displaying and messages with monochromatic 2x20 lcd display – led, audible alarm device, State charge indicator multicolours, thermal Compensation with optional probe, 2 auxiliary Contacts optional configuration at will (mains Presence, finished charge, control pump, etc…), Ventilation forced air circulation, metallic ontainer With dimensions 490 x 360 x 150 mm, weight 11 kg, protection ip20, in conformity with the Low voltage directive 73/23/cee and the emc Directive 89/336/cee and their successive Amendments.
Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, mass-produced Mains leads, input cable, connection to the battery Through anderson-rema power terminals. Nfm Switching battery charger, high frequency technology, Fully controlled by microprocessor. 240v single-phase +- 10%, luminous display for a Easy reading of the charging parameters. Different charging curves in accordance with the kind Of battery and choose among 16 standard curves, Preprogrammed valid for pb-acid, gel. Battery voltage and charge current can be changed Through the button in the front panel. “soft start” mode and display of the charging cycle With led . Electronic protection and/or fuse against short circuits Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, mass-produced Mains leads, input cable, connection to the battery Through anderson-rema power terminals. Nfc Switching battery charger, high frequency technology, Fully controlled by microprocessor. 240v single-phase +- 10%, luminous display for a Easy reading of the charging parameters. Different charging curves in accordance with the kind Of battery and choose among 16 standard curves, Preprogrammed valid for pb-acid, gel. Battery voltage and charge current can be changed Through the button in the front panel. “soft start” mode and display of the charging cycle With led . Electronic protection and/or fuse against short circuits Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, error code Display missing, mass-produced input network cable, Output cables polarized.
Advantages of hf technology: Optimal availability for use and long s Temperature during the cycle, strong Reduction of the co2 emissions, lower Water consumption, which helps prolong The life of the batteries. High production Yield. Soft start mode, customized Charge curve on request. Black hawk is a Versatile device, different charging curve Software could be installed for a specific Customized charging profile for any type Of battery. Usage: suitable for the cyclic recharge Of lead - acid batteries and floating of Sealed gel and / or lead - acid batteries. Optional air pump available Download data available Trough pc/laptop. 400 vca ± 15%, three-phase, input frequency 50 – 60 hz, efficiency ~ 90%, operating Temperature from– 20 to + 45 °c, current drawn by the battery 0 a if network Electrically Bonded, protection against output short-circuit with fuse, protection against polarity Reversal with fuse, thermal protection semi-conductors, input protection with fuses And varistors, charge curve programming and settings at will with default iu ia, Displaying and messages with monochromatic 2x20 lcd display – led, audible alarm Device, state charge indicator multicolours, thermal compensation with optional Probe, 2 auxiliary contacts optional configuration at will (mains presence, finished Charge, control pump, etc…), ventilation forced air circulation, metallic ontainer with Dimensions 490 x 360 x 150 mm, weight 20 kg (air version 23kg - 503x490x153 Mm), protection ip20, in conformity with the low voltage directive 73/23/cee and The emc directive 89/336/cee and their successive amendments.
Founded in 1968, it is a leading Italian company in the manufacturing of mattresses, bed frames, pillows, and bed accessories. The company works on 3 plants covering an area of 60,000 m2, where they process all the functions of production, storage, logistics and administration, with a total workforce of 150 units. From order entry and its electronic placement into production, the item is manufactured within 48 working hours, regardless of the type and size of product and whether it is standard or tailor-made. Products: Mattresses - spring mattresses featuring Bonnell technology, - spring mattresses featuring LFK technology, - pocket springs mattresses, - latex mattresses, - polyurethane foam mattresses (3 layers), Myform-Memory foam technology (95kg/m3) conceived and developed in collaboration with the University of Bologna. Bed frames - fixed, manual and electric - made of wood or iron Pillows - polyurethane foam - latex - fibre For over 5 years, the Company has been cooperating with University Research, which has conducted 3 studies on sleep on a statistically significant sample. It was demonstrated that the branded products lead to better sleep performances than the products previously used by the sample. Certifications and Awards - OEKO-TEX STANDARD 100 (CLASS 1) CERTIFICATION - UNI EN ISO 9001:2000 (VISION 2000), - CLASS 1 IM HOMOLOGATION for fire-resistant products, - IMO CERTIFICATION for naval supplies. - The mattresses of the polyurethane foam line are classified as Medical Devices under the Directive 93/42/EEC. - For 5 consecutive years (2003 – 2004 – 2005 – 2006 – 2007), the Company has been certified as one of Europe’s 500 fastest growing companies. References In 2005 the Company won the supply of mattresses for the entire Olympic village, during the 2006 Olympic Winter Games that took place in Turin. Lately the Company signed supply contracts with the major shipping companies for cruise ships and with renowned hotel chains. The Company would like to get in contact with agents or representatives from Germany, Austria and Switzerland, as well as importers and wholesalers from India and Indonesia.
Diatermo mono-bipolar Our Diatermo 160, by selecting the modes of operation, provides cut pure cut, coagulated cut, forced coagulation, soft coagulation and û with forceps û bipolar coagulation. It is particularly suitable for very damp operational fields such gynaecological and orthopaedic surgery. The Leading-Edge Technology enables highly professional surgery intervention; Open Circuit (OC) Alarm warns the user that connection into the neutral plate has not been made or that the cable is disconnected or the neutral plate is not in contact with the patient; in this case HF emission for cut and coagulation operation is switched off. Gima offers a wide family of Diatermo and accessories. Models 106 and 108 are monopolar units (50/80 W) suitable for small operations are ideal for veterinary, dentistry, first aid and dermatology work. All the other Gima mono-bipolar models (120/160/200/250/380/400 W) cover all the operational fields, from middle electrosurgery to surgery where high precision and reliability are essential, as endoscopy surgery. The available accessories are monopolar forceps, scissors and cables, high quality insulated bipolar forceps and cables, autoclavable electrodes, single use sterile electrodes, single use, metal and rubber plates, monopolar handles (with or without switches), footswitches and board.
Ptek nre3 three phase is designed to recharge medium - large capacity traction And start lead-acid batteries, developed using our forty-year experience in the field Of battery chargers and multi-years application of microprocessor control systems D electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, equalization charge based on Time, charging with decreasing current (wa characteristic):9÷11 h charging time, Transformer thermal protection, modular installation on galvanized steel base, sheet Steel case with modular panels, epoxy powder coating, oven-baked, standard color: Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains Input and d.C. Output polarized cables, complete with mains and battery cables; Assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge). It will start after 55’ from charge end, Duration of equalized charging phase: each hour 5’ (repeated for 48 Hours), calculation to determine the size of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek nr3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of Battery chargers and multi-years application of microprocessor control systems which On, short check of functions and Times, option to program the equalized charge automatically, lab tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, equalization Charge based on time, charging with decreasing current (wa characteristic): 9÷11 H charging time, transformer thermal protection, modular installation on galvanized Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen Printing, mains input and d.C. Output polarized cables, complete with mains and Battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah Battery: 16ax5 = 80a).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Pulse hot press used in product manufacturing process: soft line FFC and soft circuit board of FPC or rigid circuit board welding of PCB, TCP and PCB circuit board or a soft circuit board of FPC between the welding, soft circuit board of FPC and PCB between the circuit board welding etc The product is used in welding pulse hot pressing machine and it is pulse heating welding, through the pulse current heating thermocouple transmission to joint parts in close contact, without the heat effect on peripheral devices This product is used in pulse welding machine, It is the pulse welding Heating body, It by thermocouple transmission pulse electric current to Heat, make the joint part is in close contact condition, with no heat Affected around the device. Usage: Our products are widely used in various electronic components with a Small coil manufacturing production, Used in high-frequency Communications components, SMD transformers, SMD chip inductors, Winding inductanceï¼?Coil inductors,miniature,Speakers, induction IC card, Proximity card,Proximity key,RF Inlay smart card,buzzers, receivers, speakers, headphones, Antennas, microphones, transducers, hands-free headset, vibration Motor, micro-motors, clocks coil, the coil module and other small Electronic components soldered contacts and also can weld metal wire, Metal strip, metal sheet, a solar cell, the data lines, Telecommunications lead solder contacts. Welding head classification: 1. Resistance Welding Heads 2. Spot Welding Heads, 3. Butt Welding Head, 4. Hot Bar Reflow Soldering Heads 5. Ultrasonic Welding Machine Welding Head Note: Document prices and pictures are for reference only, We will according to customers drawings or samples of spot welding head for quotation. Advantage: Pulse hot press mainly used in normal SMT reflow oven should not perform welding device for welding operation, and the use of iron welding is easy to occur when welding appearance inconsistent, uneven, prone to dry and easy to weld the bad products. While the pulse hot press is different from the temperature soldering iron, pulse hot press in electrified instantly achieve the desired temperature, and once the head ends without voltage, instantly to reach room temperature; and the welding head flat, so the welding flat appearance, rarely weld bad.
Pulse hot press used in product manufacturing process: soft line FFC and soft circuit board of FPC or rigid circuit board welding of PCB, TCP and PCB circuit board or a soft circuit board of FPC between the welding, soft circuit board of FPC and PCB between the circuit board welding etc The product is used in welding pulse hot pressing machine and it is pulse heating welding, through the pulse current heating thermocouple transmission to joint parts in close contact, without the heat effect on peripheral devices This product is used in pulse welding machine, It is the pulse welding Heating body, It by thermocouple transmission pulse electric current to Heat, make the joint part is in close contact condition, with no heat Affected around the device. Usage: Our products are widely used in various electronic components with a Small coil manufacturing production, Used in high-frequency Communications components, SMD transformers, SMD chip inductors, Winding inductanceï¼?Coil inductors,miniature,Speakers, induction IC card, Proximity card,Proximity key,RF Inlay smart card,buzzers, receivers, speakers, headphones, Antennas, microphones, transducers, hands-free headset, vibration Motor, micro-motors, clocks coil, the coil module and other small Electronic components soldered contacts and also can weld metal wire, Metal strip, metal sheet, a solar cell, the data lines, Telecommunications lead solder contacts. Welding head classification: 1. Resistance Welding Heads 2. Spot Welding Heads, 3. Butt Welding Head, 4. Hot Bar Reflow Soldering Heads 5. Ultrasonic Welding Machine Welding Head Note: Document prices and pictures are for reference only, We will according to customers drawings or samples of spot welding head for quotation. Advantage: Pulse hot press mainly used in normal SMT reflow oven should not perform welding device for welding operation, and the use of iron welding is easy to occur when welding appearance inconsistent, uneven, prone to dry and easy to weld the bad products. While the pulse hot press is different from the temperature soldering iron, pulse hot press in electrified instantly achieve the desired temperature, and once the head ends without voltage, instantly to reach room temperature; and the welding head flat, so the welding flat appearance, rarely weld bad.
Thermal bonded soccer balls.
Aviation kerosene like jet fuel a 1, jet fuel ts 1, d2/en590 like diesel 10 ppm (gasoil 0.001%s), diesel 50 ppm (gasoil 0.005%s), diesel 500 ppm (gasoil 0.05%s), diesel 1000 ppm (gasoil 0.1%s), diesel 2500 ppm (gasoil 0.25%s), petrol like unleaded gasoline ron 92, unleaded gasoline ron 95, unleaded gasoline ron 97, d6 residual fuel like fuel oil 3.5% 180 cst, fuel oil 3.5% 380 cst, bitumen, base oil, white spirit, recycle base oil, bio diesel, fuel oil, lng & lpg, diesel, pet coke, petrol, crude oil, fmcg like raw metal like steel rebar, billets & slabs, aluminum ingots, copper cathode & electrodes, low carbon ferrochrome, ferrosilicon 72% and 75%, lead, zinc, casing, tubing, drill pipes, line pipes, valves package, industrial scrap & surplus like steel, copper.
Solar and photovoltaic panel, advance environmental friendly building, solar powered aircompressor machine and auxiliary equipment for vulcanizer, solar powered kiosks for artisans, african resources like lithium, lead ore, copper ore, iron ore, manganese, bitumen, rubber, avocado and cacao..Research and quality control, consulting services.
Product Name: Thermal Coal (High Quality) Specifications from analysis: Calorific Value (kcal/kg NCV) 6,399 Calorific Value Min (kcal/kg NCV) 6,000 Residual Humidity ASTM D3173/D3173M - 17a 10,77% Total Humidity ASTM D3302/D3302M - 19 13,05% Ashes ASTM D3174 - 12 3,16% Volatile Material ISO 562 - 10 41,5% Fixed Carbon ASTM D3172 - 13 44,57% Total Sulfur ASTM D4239 - 18 A Method 0,45% Brute Calorific Power ASTM D5865/D5865M - 19 6.399 cal/g Brute Calorific Power ASTM D5865/D5865M - 19 26.791 J/g Max Quantity can be supplied: 200.000 Metric Ton/Metric Tons Monthly MOQ: 40.000 Metric Ton/Metric Tons Shipping Terms : FOB Colombia or to be negotiated PRICE FOB Colombia Sept22 315 USD/MT MAX Price
Diapers Pillo New-Born A selection of products 100% Made in Italy, Designed to guarantee a long dry sensation 1.Dryway technology with 3 draining channels. 2. Wet indicator 3. Stackable adhesive 4. Elastic bands 5. Premium materials We use only certified cellulose that comes from sustainably managed forests (PEFC and FSC certifications) We do not use chlorine, perfumed lotions, heavy metals or lead to ensure a lower impact on the ecosystem. (EFC Certification)
