PAINT REFILL DME Bottle filled with 300ml mix of solvents, propellants and additives. It is compatible with most paints: acrylic, nitro-acrylic, nitro-synthetic, nitrocellulose. The reseller adds the paint according to the required color. In case of special filling the color can slightly change. We recommend using the product soon after filling the paint
A special paint that temporarily changes the color of a surface. It can be used on non-porous surfaces. It creates a decorative, protective removable film and has a soft touch effect. The original surface remains intact after the painted surface has been removed. It can be used on cars, sports gear, furnishings and more. To apply, vigorously shake the bottle for at least 1 minute, until the marbles inside the can move freely. Carefully clean the surface before application. Keep a distance of 20-30cm/8-1 2in. Apply 4 to 5 crossed layers (horizontal and vertical), each one every 10-15 minutes. It will be completely dry approximately 2 hours after application
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects.
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects
Water based paint with a ultra matt finish effect, suitable for both indoor and outdoor use. It's ideal for decorating any common surface such as metal, plastic, glass, ceramic etc. especially suitable for turning your old wood furniture into a vintage/modern piece of art. Fast drying finish, low VOC. After your application, when the paint is dry, It is advisable to add wax or transparent varnish which provides that protective layer on your newly modified piece
It's a professional enamel spray that is resistant to scratches, alcohol and gasoline. Ideal for painting tractors and agriculture machines. Before applying this paint it is mandatory to use the suitable primer (V400PRIMER3 or V400PRIMER5) Sku : V400CAR
It is the enamel that makes surfaces bright and visible from a distance, even in the absence of light. The fluorescent effect is brought out by applying AMBRO-SOL FLUORESCENT on a white background. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Sku : V400FLUOR
It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300 C-700 C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don't expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180 ' C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it's advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle. Sku:V400TEMP
It's a professional enamel spray ideal for for the paiting of rims wheels of motorcycles and cars. Thanks to its textured / embossed fi nish, this special paint is specifi c for repainting or renewing bumpers, side panels and spoilers. Sku:V400FAS
It's the enamel with antiquing effect for internal and external, based on lamellar micaceous iron-oxide, particularly suitable for the protection from the elements and the decoration of internal and external furnishing. The use of special corrosion inhibitors and the possibility of applying high thicknes-ses, allow to obtain excellent protection over time. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Application: metal and wood surface, plaster, doors, railings, gates, metal grates, metal cabinets, flashings, furniture, garden furniture. Sku:V400MIC
RAD: it s a special paint for the decoration and protection of all internal and external surfaces of heaters and radiators, resistant to 120 ' C. Suitable for home radiators, heat registers, electric convectors. PAST.2 it's an acrylic enamel for the decoration and protection of all surfaces of all appliances, as washing machines, dishwashers, refrigerators, etc. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Sku:V400RAD/PAST.2
A metallic enamel that has a particular brightness that looks similar to a mirror. It is adhesive and can be used on any material that is not non-stick (Polyethylene, etc..). Ambro-Sol Leafing is designed for indoor/outdoor use to brighten different surfaces and objects such as frames, furniture, iron, vases, mask, cups, medals, Christmas ornaments, etc. It is dry to the touch approximately 30 minutes after use and its completely dry approximately 1 hour after application. It does not provide protection from abrasions. Once applied handle with care. Sku:V400MET
This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on diffi cult surfaces such as metal alloys and metals. It protects metal surfaces from rust. Also suitable as a fi ller in bodywork car sector for small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. For overcoating are required at least 24/48 hours. After use, it's advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle. Sku:V400PRIMER
SHRUB COVER It's a formulate that gives high hiding power after just one coat to completely eliminate any stain at all by penetrating deep below the surface and then creating a seal for the prevention of new stains. Suitable for all stains caused by smoke on walls, mildew, and dirt in general. The STAIN COVER covers any stain when applied evenly over the area to be treated. The removal of particularly â??resistantâ?? stains may require repeated application of product always from a distance of 20-30 cm, paying attention to avoid runs. The product dries in 5-8 minutes if applied at a temperature of 20�°C. Sku:V500COPRI
Wood stain formulated for deep penetration and long lasting protection. Made for interiors and exteriors, it suitable for protection of wooden products such as fixtures, matchboards, boats, garden furniture, and more. It effectively protects the wood from aggressive atmospheric conditions such as sun and water. It guarantees easy maintenance, even after long periods of time from the original application. It can be painted over or left as clean sheen allowing the natural grains and knots of the wood to be more visible and accentuated. Sku:V407
This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it;s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle. Sku:V400PAST
Bituminous tar-based insulating protector, ideal for giving protection from abrasion and stone hits to all those parts of the body that are particularly exposed. Resistant to atmospheric agents. Product suitable for any type of plastic, it does not require a primer. It dries to the touch in about 30 minutes and in depth in 24 hours. Before use, shake the can for at least 2 minutes. Cod .:V400BODY
Aerosol sprays such as paints lubricants, cleaning, automotive, welding, disinfectants, diy, hardware industry, ambro sol products cover a wide range of sectors, and they are grouped into 7 different lines: lubricants, maintenance, adhesives, cleaners, zincs, paints, car care products and welding., marker pen, removable spray film.
BabyCoccola Baby Bathtub for wash basin, is a support that helps washing babies comfortably in the sink, holding up their weight, welcoming them in a natural position and making it easy to wash their private parts effortlessly at nappy change. It is provided with two suction cups that are virtually adaptable to all sinks and bidet, from the most standard to the high-end ones. All materials are also hypoallergenic and antibacterial. Product Origin : Italy Key Specifications/Special Features Materials components: Polypropylene and ThermoPlastic Elastomer. In order to have full control, the entire process, from the supply of materials to the processing environment, up to the product quality guarantee, BabyCoccola is made in Italy. Harmonization System (HS) Code : 3924-90-1000 Packaging details Inner box: Microwave 50x30x14cm Export box: One wave 52x31x70cm (5pcs)
BabyCoccola Baby Bathtub for wash basin, is a support that helps washing babies comfortably in the sink, holding up their weight, welcoming them in a natural position and making it easy to wash their private parts effortlessly at nappy change. It is provided with two suction cups that are virtually adaptable to all sinks and bidet, from the most standard to the high-end ones. All materials are also hypoallergenic and antibacterial. Product Origin : Italy Key Specifications/Special Features Materials components: Polypropylene and ThermoPlastic Elastomer. In order to have full control, the entire process, from the supply of materials to the processing environment, up to the product quality guarantee, BabyCoccola is made in Italy. Harmonization System (HS) Code : 3924-90-1000 Packaging details Inner box: Microwave 50x30x14cm Export box: One wave 52x31x70cm (5pcs)
