VOC REMOVAL BLOCK - Activated Carbon filters effectively Removes Volatile organic compounds (VOC) from water causing irritation in the eyes, nose, and throat, headaches, loss of coordination, and nausea. RO does not provide the adequate removal of VOCs. The adsorption properties of the activated carbon filter suit to remove the carbon-based VOC. No better defense mechanism against VOCs is offered than carbon as active carbon based on coconut shell is microporous and micropores can only house them suitably. To enhance the adsorption capacity of active carbon block we provide modified active carbon with nano alumina. These VOCs Blocks can be manufactured in different size for different applications. Size & Diameter can be customised as per buyer's requirement.
Carbon monoxide (CO) is a very toxic gas with TLV of 35 ppm and it is to be removed from the air in mines, enclosed spaces, fire breaking places. Active carbon can not hold the CO due to physisorption and therefore palladium impregnated carbon was developed which became even more active due to high RH. This again one of the very specialized carbon exported by us for air purification and CO removal. It almost works like the turn over catalyst and offers very high protection against CO. This carbon has High Surface area providing almost offers endless protection against CO, Works in any RH but becomes more active at high RH.
(Color Taste Odor Removal) - We are leading exporter of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The CTO Blcks have high adsorptive capacity that simultaneously removes chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification. Size & Diameter can be customised as per buyer's requirement.
IRON REMOVAL BLOCK - Iron is one of the major problem in ground water of many areas in India. Excessive levels of iron above 0.3 mg/l in water, may lead to many problems in usage and also adverse health effects. Iron will be in the form of Fe2+, Fe3+ and as few more other compounds in dissolved state in water. Iron imparts color in water if it is excessive, which leads to aesthetic effects in water. If it is used for laundry application, affects the color of the white fabric. Size & Diameter can be customised as per buyer's requirement.
Exhaust gases from several industrial and production units where coal or sulfide ores are used, contain sulfur-containing toxic gases and vapors such as sulfur dioxide, hydrogen sulfide, carbon disulfide, and several organosulfur compounds. These industrial gases need to be desulfurized effectively before mixing with the environment. Sulfur can also be removed with the use of activated carbons. Flexus Global speciality activated carbons are promising adsorbents for SO2 and sulfur-containing toxic gas removal due to their high efficiency and regenerative capacity.
Formaldehyde and other aldehydes are the main pollutants in indoor air. Formaldehydes are mainly obtained from paint, polymerizing plates, bindings, chemical fibers and even cigarette smoke Activated carbon adsorbents are the most promising adsorbents when adsorption of traces of gases and vapors is concerned. Our impregnated activated carbons offer effective chemisorption of formaldehyde from air.
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Activated carbon, also known as activated charcoal, is a highly porous form of carbon with a large surface area. It is created by processing carbon-rich materials, such as coconut shells, wood, or coal, at high temperatures to activate their adsorption properties. Activated carbon is widely used for adsorption and purification processes, including water treatment, air purification, and removal of contaminants from gases and liquids. It is known for its ability to adsorb a wide range of impurities, including toxins, pollutants, and odors.
Biofuels, in particular biodiesel has been found to be a good replacement to petro-diesel. This is because biodiesel provides quite a number of advantages among others including renewability, biodegradability, regional and agriculture development, and lower gaseous emissions Besides, renewable resources such as fats and vegetable oils, when converted to biodiesel fuel take away more carbon-dioxide from the atmosphere during their production than is added to it by later combustion. Therefore, it lessens the increasing carbon-dioxide content of the atmosphere as well as substantial reduction in PM, HC and CO emissions Typically, biodiesel could significantly reduce unburned total hydrocarbons (THCs), and carbon monoxide (CO) and nitric oxides (NOx) In addition, biodiesel fuel offers engine performance similar to the one of petroleum & diesel fuel.Please contact us for more information on our dedicated product line for biodiesel and renewable diesel.
White Mineral Oil
Mazut M100 Gost 10585 75/99 Mazut is a heavy, low quality fuel oil, used in power plants and similar applications. In the United States and Western Europe, by using FCC or RFCC processes, mazut is blended or broken down, with the end product being diesel.
Light liquid paraffin oil / White Mineral Oils - Pharma grade are severely Hydro treated Base Oils, ranging from low viscosity to very high viscosity grades. All products and processes comply to National & International Standards and Pharmacopoeias such as IP, BP, USP & EP. The product is also approved and certified by GMP ,KOSHER , HALAL , ISO , NSF , FDA lndia. White Mineral pils are used as a blending base for Pharmaceutical such as creams, lotions, hair oils, petroleum jelly, ointments, laxatives etc. It also find application in many other industrial segments such as polystyrene manufacturing, food packaging industries, protective coatings for fruits and vegetables, food preservatives, veterinary preparations etc. Product is offered in HDPE Drums / IBC and bulk Flexi bags or ISO tanks Global customers/ importers are offered in USD on FOB ,CIF ,CFR basis. We are one of the premier Manufacturer & Exporter & export to more than 60 countries worldwide
Light liquid paraffin oil / White Mineral oil - Technical grades represent the Technical White Oils with slightly different test requirements and are developed for applications in polymers, plastic industries and animal feeds besides certain non-critical applications in packaging and food machinery lubrication where minimal food contact is expected. Technical.grades are available in all viscosity grades starting from 8 cSt @ 40 deg C to 100 cSt @ 40 deg C and with pour points ranging from -5 to -30 deg C.
HEAVY LIQUID PARAFFIN OIL ( Technical & Pharma grade available) . Heavy Liquid Paraffin Oils produced from severely refined hydro cracked / hydro treated base oil with high degree of purity to meet IP / BP / USP specifications have excellent oxidation / UV stability. These oils are suitable for Pharmaceutical, Cosmetics and Food Industries for Direct & Indirect Food Contact.