Corten steel plates, carbon steel products, alloy steel products and stainless steel sheets, plates, and coils, stainless steel pipes..Export
Brass hex nut, fasteners, hex nut, nuts bolts. copper & copper alloy components. electrical, oil & gas, irrigation and industrial components..
Copper tubes come in various grades, each with specific properties suited to different applications. The most common grades of copper tubes include: ASTM B88 (Type K, L, M): Type K: This grade of copper tube has thick walls and is typically used for underground water services and distribution. Type L: Type L copper tubes have medium thickness walls and are commonly used for residential water supply lines, refrigerant lines, and heating systems. Type M: Type M copper tubes have thin walls and are suitable for general residential and commercial plumbing applications where pressures are relatively low. ASTM B280: ASTM B280 copper tubes are seamless, drawn-copper tubes used for refrigeration and air conditioning systems, as well as in heating applications. These tubes are available in various tempers, such as annealed (soft) and drawn (hard), to suit different installation requirements. ASTM B75 (Type K, L): Type K: Similar to ASTM B88 Type K, these tubes have thick walls and are commonly used for underground water services and distribution. Type L: Similar to ASTM B88 Type L, Type L tubes have medium thickness walls and are suitable for residential water supply lines and refrigerant lines. ASTM B88 (Type ACR): ACR (Air Conditioning and Refrigeration) copper tubes are specially designed for use in air conditioning and refrigeration systems. These tubes are typically annealed for ease of bending and are available in various sizes to accommodate different system requirements. ASTM B819: ASTM B819 copper tubes are seamless copper tubes specifically designed for medical gas systems. These tubes are cleaned and capped to meet stringent purity requirements for medical gas applications. Copper-Nickel Alloys: Copper-nickel tubes, such as CuNi 90/10 (90% copper, 10% nickel) and CuNi 70/30 (70% copper, 30% nickel), offer excellent corrosion resistance and are commonly used in marine and offshore applications, as well as in heat exchangers and condensers in aggressive environments. These are some of the commonly used grades of copper tubes. The selection of the appropriate grade depends on factors such as application requirements, operating conditions, and regulatory standards. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
Aluminum is a versatile material used in various industries due to its lightweight, corrosion resistance, and excellent thermal and electrical conductivity. Aluminum sheets, pipes, and coils come in different grades, each suited to specific applications. Here are some common grades: Aluminum Sheets: 1000 Series: Commercially pure aluminum with excellent corrosion resistance, high thermal and electrical conductivity. Common alloys include 1050, 1060, and 1100. 3000 Series: Aluminum-manganese alloys with moderate strength and good formability. Alloy 3003 is widely used in general fabrication, cooking utensils, and chemical equipment. 5000 Series: Aluminum-magnesium alloys with good weldability and corrosion resistance. Alloy 5052 is commonly used in marine applications, vehicle bodies, and electronic enclosures. 6000 Series: Aluminum-magnesium-silicon alloys with good formability and strength. Alloy 6061 is widely used in structural components, aircraft fittings, and automotive parts. 7000 Series: Aluminum-zinc-magnesium alloys with high strength. Alloy 7075 is one of the strongest aluminum alloys and is used in aerospace, military applications, and high-stress structural components. Aluminum Pipes: 6061-T6: A commonly used alloy in structural applications due to its high strength, corrosion resistance, and excellent weldability. 6063-T6: Known for its good formability, surface finish, and moderate strength, making it suitable for architectural applications and extruded shapes. 5086: A marine-grade alloy with excellent corrosion resistance, often used in boat hulls, pressure vessels, and cryogenic applications. Aluminum Coils: 1100: A commercially pure aluminum grade with excellent corrosion resistance and high electrical conductivity, used in applications requiring high thermal conductivity. 3003: A general-purpose alloy with good formability and weldability, commonly used in packaging, signage, and building facades. 5052: A high-strength alloy with good formability and corrosion resistance, used in marine, automotive, and electronic applications. 6061: A versatile alloy with excellent machinability and weldability, used in aerospace, marine, and automotive components. Each grade of aluminum offers specific properties suited to different applications. The selection of the appropriate grade depends on factors such as mechanical properties, corrosion resistance, formability, and cost considerations. It's important to consult with material suppliers or engineers to choose the right grade for your specific application requirements.
Carbon steel pipes come in various grades, each with specific properties and applications. The choice of grade depends on factors such as the intended use, operating conditions, and required mechanical properties. Here are some common grades of carbon steel pipes: ASTM A53/A53M: Grade A: This grade is typically used for non-pressure applications and is suitable for welding and forming operations. Grade B: Grade B is the most commonly used grade and is suitable for conveying fluids and gases under high pressure and temperature conditions. ASTM A106/A106M: Grade A: This grade is suitable for low-temperature applications and is commonly used in refineries and plants where corrosion resistance is not a concern. Grade B: Grade B is the most commonly used grade and is suitable for high-temperature and high-pressure applications such as steam, water, and oil transportation in refineries and plants. Grade C: This grade is commonly used for low-temperature applications and offers better impact properties than Grades A and B. ASTM A333/A333M: Grade 1: This grade is suitable for low-temperature applications down to -50�°F (-45�°C) and is commonly used in refineries, chemical plants, and power plants. Grade 3: Grade 3 offers good impact properties and is suitable for low-temperature applications down to -150�°F (-101�°C). Grade 6: Grade 6 is the most commonly used grade and offers excellent impact properties at low temperatures down to -50�°F (-45�°C). API 5L: Grade A: This grade is suitable for conveying low-pressure fluids and is commonly used in the transportation of natural gas and petroleum products. Grade B: Grade B is the most commonly used grade and is suitable for conveying fluids under high pressure and temperature conditions. X42, X52, X60, X65, X70, X80: These grades offer higher strength and are suitable for conveying fluids in demanding environments such as offshore drilling rigs and pipelines. ASTM A672/A672M: Grades A45, A50, A55, A60, A65, A70: These grades are electric-fusion-welded steel pipes suitable for high-pressure service at moderate temperatures. ASTM A691/A691M: Grades CM-65, CM-70, CM-75: These grades are electric-fusion-welded steel pipes suitable for high-pressure service at high temperatures. These are some of the commonly used grades of carbon steel pipes. Each grade has specific chemical composition and mechanical properties designed to meet various industry standards and applications. It's essential to consult relevant standards and specifications to select the appropriate grade for specific project requirements.
Duplex stainless steel comes in several grades, each with its own specific composition and properties. The most common duplex stainless steel grades are: Duplex 2205 (UNS S32205/S31803): This grade contains approximately 22% chromium, 5-6% nickel, 3% molybdenum, and a small amount of nitrogen. Duplex 2205 offers excellent corrosion resistance in a wide range of corrosive environments, including chloride-containing media such as seawater and brine solutions. It has high strength and good weldability, making it suitable for various applications in industries such as oil and gas, chemical processing, and marine engineering. Duplex 2507 (UNS S32750): Duplex 2507 contains higher chromium (24-26%), molybdenum (3-5%), and nitrogen compared to Duplex 2205. This grade offers superior corrosion resistance and higher strength than Duplex 2205, particularly in highly corrosive environments with high chloride content. Duplex 2507 is often used in aggressive environments such as offshore oil and gas production, chemical processing, and desalination plants. Duplex 2304 (UNS S32304): Duplex 2304 contains lower chromium (21-23%), nickel (3.5-5.5%), and molybdenum (0.05-0.6%) compared to Duplex 2205 and 2507. It offers good corrosion resistance in mild to moderately corrosive environments and higher strength than austenitic stainless steels. Duplex 2304 is commonly used in structural and architectural applications, as well as in chemical processing equipment and transportation vessels. Duplex LDX2101 (UNS S32101): Duplex LDX2101 contains lower chromium (21.5-22.5%), nickel (1.5-2.5%), and molybdenum (0.1-0.8%) compared to other duplex grades. It offers good corrosion resistance, high strength, and low thermal expansion, making it suitable for structural and industrial applications. Duplex LDX2101 is often used in structural components, storage tanks, and transportation equipment. These are some of the most commonly used grades of duplex stainless steel. Each grade offers a unique balance of corrosion resistance, mechanical properties, and cost-effectiveness, allowing engineers and designers to select the most suitable grade for specific applications based on performance requirements and environmental conditions.
Nickel 405 (UNS N04405): Nickel 405 is a variation of Monel 400 with slightly modified chemical composition, featuring higher sulfur content. The increased sulfur content improves machinability but may slightly reduce the alloy's corrosion resistance compared to Monel 400. Despite the slight compromise in corrosion resistance, Nickel 405 still offers excellent resistance to marine environments, alkaline solutions, and acidic conditions. It is often used in applications where improved machinability is desired, such as screw machine parts, fasteners, and valve stems. Nickel 200 (UNS N02200) and Nickel 201 (UNS N02201) are commercially pure wrought nickel grades with low carbon content. They offer excellent resistance to corrosive environments, particularly alkaline solutions.
Stainless steel sheets/plates are commonly used in industries such as construction, automotive, aerospace, food processing, pharmaceuticals, and many others. They come in various grades and finishes, each suited to different applications and environments. Some common grades of stainless steel include: Austenitic stainless steel (e.g., 304, 316): Known for their excellent corrosion resistance, good formability, and weldability. Ferritic stainless steel (e.g., 430): Generally less corrosion-resistant than austenitic grades but offers good resistance to stress corrosion cracking and higher strength. Martensitic stainless steel (e.g., 410, 420): Known for their high strength and hardness but with lower corrosion resistance compared to austenitic and ferritic grades. Stainless steel sheets/plates come in various sizes, thicknesses, and surface finishes. They can be cold rolled, hot rolled, or even fabricated to custom specifications. The choice of grade, thickness, and finish depends on the specific requirements of the application, such as structural integrity, aesthetic appeal, and environmental conditions. Common surface finishes for stainless steel sheets/plates include: #1 (HRAP) - Hot Rolled Annealed and Pickled #2D - Dull Cold Rolled Finish #2B - Bright Cold Rolled Finish #3 - Coarse Abrasive Finish #4 - Brushed or Satin Finish #8 - Mirror Finish Stainless steel sheets/plates can be further processed through cutting, bending, welding, and other fabrication methods to meet the exact needs of a project. They offer versatility, durability, and a sleek appearance, making them a popular choice in various industries.
Raymond Tube Industries proudly offers a comprehensive selection of stainless steel coils in all grades to fulfill diverse industrial needs. Our coils are meticulously crafted to exhibit exceptional quality, durability, and reliability across various applications. Whether you require coils in AISI 304, 304L, 310, 316, 316L, 321, 410, 420, or any other grade, we provide a wide range of options to suit your specific requirements. From standard sizes to custom specifications, our stainless steel coils are manufactured to meet stringent quality standards and exceed your expectations. Contact Raymond Tube Industries today to explore our extensive range of stainless steel coils in all grades.
Raymond Tube Industries offers a comprehensive range of stainless steel seamless pipes in all grades to cater to diverse industrial requirements. Crafted with precision and expertise, our seamless pipes are renowned for their exceptional quality, durability, and reliability. Whether you need pipes in grade AISI 304, 304L, 310, 316, 316L, 321, 410, 420, or any other grade, we have you covered. From standard sizes to custom specifications, we ensure that our stainless steel seamless pipes meet the highest standards and exceed your expectations. Contact Raymond Tube Industries today to explore our complete range of stainless steel seamless pipes in all grades.
Supplier of stainless steel bar as per astm/asme sa 182 & sa 479 gr. f304l, 304h, 304ln, 309, 309s, 309h, 310s, 310h, 316, 316l, 316h, 316ln, 317, 317l, 321, 321h, 347, 347h, 348, 348h,17 4ph,13 8mo,15 5ph,xm19(nitronic 50),nitronic 60, 422,(616) etc.duplex bar as per astm/asme sa a479/276/182 uns no: s31803 (f51), s32750 (f53) & s32205 (f60).is 2062 gr. a, b & c.nickel copper alloy rod, bar & wire as per astm/asme sb 164 uns no: n04400 (monel 400) & n04405.nickel chromium iron alloy rod, bar & wire as per astm/asme sb 166 uns no: n06600 (inconel 600).nickel chromium molybednum columbium alloy rod, bar & wire as per astm/asme sb 446uns no:n06625 (inconel 625).nickel alloy forged bar as per astm/asme sb 462 uns no: n08020 (alloy 20 / 20 cb 3).nickel alloy forged bar as per astm/asme sb 564 uns no: n04400 (monel 400), n06600 (inconel 600), n08800 (inconel 800), n06625 (inconel 625), n08825 (inconel 825).
"elevating industries worldwide: premier exporter, importer, and supplier of stainless steel, carbon steel, and specialty alloy pipe fittings, including aluminium, nickel, brass, copper, duplex, inconel, monel, and hastalloy.".Exporter.
Stainless Steel, High Nickel Steel, Alloy Steel and Carbon Steel product range includes pipes, fittings, flanges, fasteners, plates, round bars, wires, coils and more.Manufacturer and exporter
Perforated (coils / sheets / plates / circle, pipes) fastener fittings, stainless steel , carbon steel , mild steel ,alloys steel, other all grade, perforated coils / sheets / plates, circle, pipes, (welded & seamless) in the shape of round, square, oblong, capsule, rectangular, hexagonal, dimpled & lipped..Manufacturer
Flanges, forged fittings & pipe fittings in stainless steel, duplex ,super duplex ,hastelloy c22,c276,inconel 600,625,80,825,monel 400,k500, alloy steel & carbon steel and supplying the same to various industries like chemical, engineering, fire protection and process equipment .
Stainless steel products (bars, blooms/billets, bright bars rounds, and wire rods, rounds), specialty alloy steel products (blooms/billets, bright bars, round bars, wire rods, and wires), eot & gantry cranes, portyard & shipyard cranes, bulk material handling equipment, special purpose heavy equipments.
Price may vary based on the Quality and Quantity required and mode of payment. Please find the specifications of the product below. Elements unit mg/kg (ppm) Al(Aluminium) 5.0525 Fe(iron) 0 Na(sodium) 0.2864 B(boron) 0 K(Potassium) 0.1867 Ni(Nickle) 0 Ca(calcium) 0.8223 Li(lithium) 0.3178 P(phosphorus) 0.0583 Cr(chromium) 0.0294 Mg(magnesium) 0.1239 Ti(Titanium) 2.2245 Cu(copper) 0.003 Mn(manganese) 0.0932 Ba(barium) 0.0011 Total impurities 9.20% SiO2(Silica) 99.99%
Frame: 27.5"x19", Alloy 6061 Battery: 36V DC, 7.65Ah, 2000 charging cycles, Panasonic Motor: 36 V DC, 250W brushless multi-speed, IP:54 Display: Advance multi functional LCD display showing speed, distance, cruise, trip, and digital lock, IP:65 Brakes: Double disk brakes, Shimano Tourney Suspension fork: Alloy outer legs, 100 mm travel Mileage: Throttle mode: 25 km/charge e-cycling mode: 70 km/charge(Level 1) 50 km/charge(Level 5) Gears: 7 speed, Shimano Tourney Hub: Alloy with sealed bearing
GENUINE T5 TFL GERMICIDAL UVC RADIATOR AVS 220VOLT 20WATT POWER CIRCUIT CONSTANT 254NM AND 2500MW OF UVC POWER OUTPUT SPECIAL UVC REFLECTING ALUMINIUM ALLOY REFLECTOR MADE WITH LOVE IN INDIA
3-d Position Indicater Material of construction Polycarbonate , ABS , Steel , Aluminium Temperature Range - -40 degrees to 100 degrees Designed for Nema 4 , 4x , 7 & 9 environments
