CAS # 24634-61-5 HS CODE 29161900 Potassium Sorbate FCCV,2,4-Hexadienoic acid potassium salt,Sorbic acid potassium salt used as preservative in food industry Identification Conform Standard Appearance White Granular Assay 98-101% Acidity(As sorbic Acid) 1% Alkalinity(As K2CO3) 1% Arscinc(As AS) 3ppm Heavy Metals(Pb) 10ppm Loss on drying 1% 25kg net in carton
Potassium Sorbate FCCV CAS # 24634-61-5 Potassium Sorbate FCCV,2,4-Hexadienoic acid potassium salt,Sorbic acid potassium salt Identification Conform Standard Appearance White Granular Assay 98-101% Acidity(As sorbic Acid) 1% Alkalinity(As K2CO3) 1% Arscinc(As AS) 3ppm Heavy Metals(Pb) 10ppm Loss on drying 1% 25kg carton 13.5 mt/20 fcl'
Soda ash light 99.2%, potassium carbonate, calcium chloride, sodium metasilicate anhydrous, fatty alcohol co - 810, d-limonene, ascorbic acid, ammonium sulphate, acetic acid 99% food grade, sodium sulphate, sodium citrate, oxalic acid, caustic potash, potassium carbonate, sodium metabisulfite, formic acid 64-18-6, soda ash light 99.2%, phosphoric acid food grade 85%, caustic soda 96%-99%min.
Quinoline-8-boronic acid 86-58-8, Quinoline-6-boronic acid 376581-24-7, Quinoline-5-boronic acid 355386-94-6, 2-(quinolin-6-yl)acetic acid 5622-34-4, 5-bromoquinoline 4964-71-0, 2-quinolinecarboxaldehyde 5470-96-2, 2-methylquinoline-6-carbaldehyde 108166-03-6, 4-hydroxy-7, 8-dimethoxyquinoline 99878-76-9, Quinoline-8-carboxylic acid 86-59-9, Quinoline-5-carboxylic acid 7250-53-5, 8-acetylquinoline 56234-20-9, 6-(trifluoromethyl)quinoline 325-13-3, 2-(bromomethyl)quinoline 5632-15-5, Quinoline-4-boronic acid 371764-64-6, Quinoline- 3-boronic acid 191162-39-7, Quinoline- 2-boronic acid 745784-12-7, 7-methoxy-4-quinolinol 82121-05-9, Ethyl (4-hydroxy-7-methoxy)quinoline-3-carboxylate 63463-15-0, 7-chloro-4-hydroxy-2-(trifluoromethyl)quinoline 57124-20-6, 4-hydroxy-7-(trifluoromethyl)quinoline 322-97-4, 2-methylquinolin-4-amine 6628-4-2, 4-hydroxy quinoline 611-36-9, 4-hydroxy-7-methoxyquinoline-3-carboxylic acid 28027-17-0, Ethyl 4-amino-2-methylquinolin..
Gum rosin, glycerol ester of gum rosin, phosphoric acid, PCE, SLES, LABSA.
Soda ash, sodium sulphate, acetic acid.
Phosphoric Acid, Sodium Tripolyphosphate, Sodium Hexametaphosphate, Sodium Acid Pyrophate, Tetrasodium Pyrophosphate, Monosodium Phosphate/disodium Phosphate/trisodium Phosphate.
Chemical Products Like Melamine, LABSA, Choline Chloride.
Titanium dioxide, melamine, maleic anhydride, monosodium glutamate, glycerin, citric acid, acrylates, h202, shs, phosphoric acid.Importing and exporting
Phosphoric acid 85% min. Validity:7 days Quantity:1 x 20' fcl = 21mt/600 drums packing: in blue plastic drum of 35kgs net each
Ascorbic acid. 25KGS/Carton.
Phosphoric acid 85% min. Usd475/mt fob tech. Grade Usd485/mt fob food grade Validity:7 days Quantity:1 x 20' fcl = 21mt/600 drums packing: in blue plastic drum of 35kgs net each
Medical gloves, sodium sulphate anhydrous, soda ash, phosphoric acid, durian.
Formic acid is an eco-friendly, versatile solution that has been used in many applications: - Leather processing - Textile processing - Feed preservation - Cleaning - Biocide - Latex coagulation - Flue gas desulfurization Formic acid (85%) Specification: Appearance: Colourless liquid Purity: 85% min Chroma (as platinum-cobalt): 10 max Chloride (as CL): 0.005% max Sulphate(as SO4): 0.002% max Ferrous(as FE): 0.0005% max Evaporation Residue: 0.02% max Packing: 25/35/250kg Plastic drum or 1200kgIBC, 20MT in the 20'FCL
Key specifications/special features Specifications: Nominal voltage: 12v Nominal capacity (10 hours rate): 5ah Maintenance: free Type: dry charge Dimensions (approximately): Length: 113mm Width: 68mm Height: 105mm Weight (with acid)/cell: 1.76kg Oem service: available Polarity: ± Cca: 70 Storage temperature must be within the range of -20 to 40° c Features: Keep in a place for one year without working, it still will have enough power to start the motorcycle, which overcomes the disadvantage of the battery with acid, can't be in stock for a long time After adding acid, place battery under normal temperature for 5 minutes, then it can work without recharge Dimensions (approximately): Length: 113mm Width: 68mm Height: 105mm Weight (with acid)/cell: 1.76kg
Quinoline-8-Carboxylic Acid purityú¦: 98% Minú¿HPLCú¬ MW: 173.17 Appearance: white to yellow crystal powder Melting point: 183-185ípC Moisture:0.5%(MAX) Hazard Symbol: xi:irritant Risk S37/39 S26 MF:C10H7NO2
L-2-Aminoadipic acid
Performance Corrosion properties: resistance to corrosion of h2s and co2 with high temperature, salt water, alkali and weak acid corrosion, meeting the corrosion resistance requirements of standard nace 0177. Wear: good wear resistance, superior or equivalent to chrome. Coating adhesion: tested according to gb / t5270-2005, the tungsten alloy layers dont crack or peel off. Appearance: red and black uniform tungsten alloy. Thickness: the thickness of 0.15mm. Performance testing Wear and corrosion resistance test: passed a variety of the wear and corrosion resistance tests carried out by an cnpc tubular goods research institute, an maurer petroleum engineering laboratory, and quality supervision and inspection center of surface covering layer products of machinery industry. Standard shipping packaging, as required
1. Structure: it is a normal api standard deposition with tungsten alloy coatings on the ir inner and outer walls. 2. The performance indicators: Basic performance: meet api standards. Corrosion properties: resistance to corrosion of H2s and Co2 with high temperature, salt water, alkali and weak acid corrosion, meeting the corrosion resistance requirements of standard nace 0177. Wear resistance: good wear resistance, equivalent to hard chromium layer. Adhesion of tungsten alloy layer and substrate: tested according to gb / t5270-2005, the tungsten alloy layers dont crack of peel off. Appearance: uniformly bright, silvery white Tungsten alloy layer thickness: 40-60 3. Performance testing Wear and corrosion test: having passed a variety of the wear and corrosion resistance tests carried out by an cnpc tubular goods research institute, xian maurer petroleum engineering laboratory, and quality supervision and inspection center of surface covering layer products for machinery industry. Standard shipping packaging, as required
1. The structure: Api standard inner tube and the outer surface of the threaded couplings deposited tungsten alloy layer. 2. The performance indicators: The basic properties: size, precision thread sealing meet api standards. Threaded connection: thread has good release buckle sex. Corrosion properties: anti h2s / co2 temperature corrosion resistance to salt water corrosion, alkali, corrosion resistance, weak acid corrosion, nace 0177 to meet the standard requirements for corrosion resistance. Tungsten alloy layer and the substrate binding: according to gb / t5270-2005 testing, coating does not crack, not falling. Appearance: uniformly bright, silvery white Tungsten alloy layer thickness:
