Acrylic resin impact modifier ACR 1.Introduction Impact modifier ACR-IM product line is a new generation of core-shell acrylic copolymer, the core layer of glass temperature is -50 - 55 The series of impact modifier-impact modifier and processing to improve performance in one, to increase the products of weathering and surface gloss, anti-aging properties, especially suitable for outdoor use products, widely used in the profile, non-transparent sheet, plate , Pipe, PVC pipe, and other indoor and outdoor products. 2.Physicochemical properties Specification Item IM-10 IM-20 IM-30 Appearance White freely flowing powder Granularity (percent of pass at 20 mesh) % 98 Volatility% 1.2 Apparent densityg/ml 0.40-0.55 Core glass transition temperature -50 -48 -55 3.Characteristics (1)Excellent weatherability. (2)Excellent impact resistance (3)Excellent processability 4.Use direction IM-10 has a normal processing performance and high resistance to impact and the need to use a small amount of processing aid; IM-20 has a high processing performance and better impact resistance and, without the use of a processing aid; IM -30 Do not have the processing performance, but with excellent impact performance, need to use of processing aid. 5.Recommended dosage Product Profiles Pipes fittings Plates Recommended dosage 6-7 6-9 3-6 6-7 6.Storage, packaging, transport This product is packed in sealed plastic bags and then put into weave bags, the bags with product certification, packaging bags external annotated: trademarks, manufacture, product weight.
Crystals such as sodium chloride (NaCl), potassium bromide (KBr) and potassium chloride (KCl) are uniform, bright and high transmittance within 0.250-20 �¼m when thickness less than 10mm, and no impurity absorption. These single crystals are ideal materials for making optical elements for prisms, lenses, filters, and various windows in infrared devices and optical instruments. OST Photonics offers high quality KBr substrates for researchers and industries. Crystal orientation, size and thickness can be customized according to your requirements. Application of KBr Substrates Infrared devices optical instruments Advantages of KBr Substrate Uniform, bright and high transmittance within 0.250-20 �¼m when thickness less than 10 mm No impurity absorption Ability of KBr Substrates Orientation:,,, etc. Dimension: 1, 2, 10x10mm, 20x20mm, etc. Thickness: 0.5mm, 1.0mm, 2mm, 5mm, etc. Available items: windows, substrates, blanks and customized optics
Cerium-doped Lutetium Yttrium Orthosilicate or LYSO(Ce) scintillator has the advantages of high light output, high density, short decay time, excellent timing and energy resolution. These properties make LYSO(Ce) becoming the most popular scintillators in Nuclear medicine (Positron Emission Tomography, PET/CT, and SPECT scan system), high energy physics, security scanners, and other applications. OST Photonics has a complete set of crystal processing and assembly line, we can process all kinds of lyso scintillation crystal and LYSO(Ce) arrays according to customer's requirements. We have our own laboratory to test the product performance to ensure that the product performance meets the requirements of our customers. We provide professional solutions for lyso crystal growth, surface treatment and array assembly. Application of LYSO Ce Scintillators (LYSO:Ce Scintillators) Positron emission tomography-computed tomography (PET-CT) Nuclear magnetic resonance imaging (NMRI) Single photon emission computed tomography (SPECT) High energy physics Advantages of LYSO scintillator (LYSO:Ce Scintillators) High light output High density Short decay time Stable chemical and physical lyso scintillator properties The Ability of OST Photonics Maximum Size: 105mm x 200mm Available items: monolithic crystal, scintillation screen, pixellated array
Li-6 lithium glass scintillator is a kind of inorganic scintillator which can be used for thermal neutron detection. It has the advantages of short decay time, high efficiency of slow neutron detection and good temperature performance. In addition, the Li-6 glass scintillator is easy to process and form, non-hygroscopic, acid and alkali resistant, can withstand the high and low temperature rapid change. Therefore, in the harsh situation that contains corrosive liquid and vapor, the lithium glass (Ce) can still work, but other scintillators cannot be suitable. Li-6 glass scintillator are widely used in neutron time-of-flight experiments, oil and natural gas exploration, moisture content measurement, nondestructive testing and neutron photography. OST Photonics can provide different specifications of Li-6 glass scintillators according to your requirements. Neutron time-of-flight experiments Oil and natural gas exploration Moisture content measurement Nondestructive testing(NDT) Neutron photography Advantages of Li-6 Glass Scintillators Fast decay time High efficiency of slow neutron detection Good temperature performance Non-hygroscopic The Ability of OST Photonics Maximum Size: �¸50mm x 50mm Available items: monolithic glass
CdWO4 Cadmium tungstate crystal is a high density, high atomic number scintillator with a relatively high light yield. The emission maximum is at 475nm and the total light output is 12 to 15 photons/keV. The light yield relative to NaI(Tl) on a bialkali PMT is 30 to 50%. In addition, CdWO4 Scintillator cadmium tungstate scintillator also has the advantages of strong radiation resistance and no radioactive background. The high light output and low afterglow make it ideal for use with silicon photodiodes in detectors for medical and industrial Computed Tomography (CT) scanners. Ost Photonics is able to supply CdWO4 crystals cadmium tungstate scintillator and CdWO4 linear or 2-D array upon your requests. Application of CdWO4 Scintillators (Cadmium Tungstate Scintillators) Industrial computed tomography (CT) scanners Medical computed tomography (CT) scanners Security inspection High energy physics Advantages of CdWO4 Scintillator (Cadmium Tungstate Scintillator) Low afterglow Relatively high light yield Strong radiation resistance High density high atomic number No radioactive background The Ability of OST Photonics CdWO4 Scintillators(Cadmium Tungstate Scintillators) Maximum Size: �¸80mm x 200mm Available items: monolithic crystal, linear or 2-D array
201 2B Stainless Steel 2B is the most widely used stainless steel surface finish. 201 2B stainless steel is especially common in industrial, chemical and food processing applications such as process vessels and storage tanks. It is also used in some architectural applications, such as downspouts and gutters, where the uniformity of the finish will not be carefully checked. Consider the following properties when specifying this 201 2B stainless steel: 2B is the most economical finish Chemically pickled and smooth, thus highly resistant to corrosion 201 2B stainless steel is not uniform and may not match in appearance over a wide range and between batches etc. As sub-product of 2B surface finish stainless steel, 201 2B stainless steel has been produced in the factory and cannot be matched after processing 201 2B stainless steel is often protected by a plastic film until final cleaning and commissioning Specification Of 201 2B Stainless Steel Coil No.1 Finish Stainless Steel Plate Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539 Standard JIS, AISI, ASTM, GB, EN Place of Origin China Certification ISO Thickness Range 0.3-3.0MM Thickness Tolerance ± 5%MM Surface Classification 2B Grade / Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement Length Steel Plate Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement Technique Cold Rolled Quality High Quality Inspection Application 201 2B stainless steel is typically used for non-cosmetic parts. Items we typically see with a 2B finish include bakeware and flatware, fixtures, solar panels, industrial equipment, enclosures and covers. Brief Introduction A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls. This general-purpose finish is more readily polished than No 1 or 2D finishes.
304 2B Stainless Steel 304 2B Stainless Steel is a versatile and widely used stainless steel that contains chromium and nickel. It has a smooth, SS 304 2b finish that is resistant to corrosion and can be easily cleaned. As the popular choice among 2B finish stainless steel, 304 2B stainless steel sheet is commonly used in applications such as architecture, food processing equipment, and chemical containers. Please feel free to contact us, the leading 304 stainless steel plate supplier for SS 304 2B finish sheet price. 304 2B Stainless Steel Specifications No.1 Finish Stainless Steel Plate Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539 Standard JIS, AISI, ASTM, GB, EN Place of Origin China Certification ISO Thickness Range 0.3-3.0MM Thickness Tolerance �± 5%MM Surface Classification 2B Grade / Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement Length Steel Plate Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement Technique Cold Rolled Quality High Quality Inspection Application 304 stainless steel 2B finish is typically used for non-cosmetic parts. Items we typically see with a 2B finish include bakeware and flatware, fixtures, solar panels, industrial equipment, enclosures and covers. Brief Introduction A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls. This general-purpose finish is more readily polished than No 1 or 2D finishes. What Are The Applications Of 304 2B Stainless Steel? 304 2B Stainless Steel has a wide range of applications. It is commonly used in the manufacturing of kitchen equipment, food processing equipment, and dairy equipment. 304 2B stainless steel sheet is also used in architectural applications such as railing systems, wall cladding, and decorative trim. Additionally, 304 2B finish SS is utilized in the automotive industry, chemical processing, and medical equipment. What Are The Advantages Of Using 304 2B Stainless Steel? 304 2B Stainless Steel offers several advantages. It has excellent corrosion resistance, even in harsh environments or exposure to chemicals. It is also easy to clean, making it hygienic for applications in food processing or medical settings. 304 2B Stainless Steel has good formability and can be easily welded, making it versatile for various fabrication processes. Additionally, 304 2B stainless steel sheet has a visually appealing, smooth surface finish.