For lead ore , pb 60% above
Features Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating Voltage from 18V to 1800V Full compliance with RoHS and REACH Applications Industrial equipment Home appliance Industrial equipment Lighting products Telecommunication or telephone system
Quartzite stone
Tea bran enzyme, sea spirit grass, anthocyanins, hydrolyzed wheat, seaweed extract, wood blue powder extract, sodium sulfate, etidronic acid, bamboo charcoal extract, coffee poly-phenol, laurylamide VI amine oxide, magnesium carbonate.
Ito glass: Bare (unpatterned) indium-tin-oxide (ito) glass; ito conductive glass; ito glass Ito patterning: photolithography Pattern drawing: client design; pre-patterned Size: 25mm x 25mm; 30mm x 30mm; 50mm x 50mm; 100mm x 100nn; 150mm x 150mm; 10mm x 10mm up to 355 mm x 406 mm Sheet resistivity (ohm/sq) : 7, 10, 15, 20, 100 ohm/sq. (recommended, others are available) Substrate thickness: 0.4, 0.55, 0.7, and 1.1 mm Carton
Ito patterning: photolithography Pattern drawing: client design; pre-patterned Size: 25mm x 25mm; 30mm x 30mm; 50mm x 50mm; 100mm x 100nn; 150mm x 150mm; 10mm x 10mm up to 355 mm x 406 mm Sheet resistivity (ohm/sq) : 7, 10, 15, 20, 100 ohm/sq. (recommended, others are available) k By carton
Rare earth oxide, rare earth metal, rare earth salt.
Titanium dioxide, soda ash light & dense, sodium nitrite & nitrate, melamine, caustic soda, calcium chloride, calcium carbide & acrylamide.
Shoes 100% leather, goat skin, cow skin or pig skin Inner lining pig skin, durability & comfort. Oem welcome As per buyer requirement
Iron ore
Non ferrous metal minerals, iron ore, copper ore, zinc, lead, tantalite, manganese ore, rock, chemical fillers, lime, oxide pigments, dolomite powders, chips, calcite, talc-upper white, cyanide, magnesium, gypsum, silica.
Soda ash light 99.2%, potassium carbonate, calcium chloride, sodium metasilicate anhydrous, fatty alcohol co - 810, d-limonene, ascorbic acid, ammonium sulphate, acetic acid 99% food grade, sodium sulphate, sodium citrate, oxalic acid, caustic potash, potassium carbonate, sodium metabisulfite, formic acid 64-18-6, soda ash light 99.2%, phosphoric acid food grade 85%, caustic soda 96%-99%min.
Product characteristics: The highly active Zinc powder produced by our company has some characteristics of high contain of Zinc, low impurity elements, smooth surface, large surface area, small density of loose-powder, little oxide on surface, melting deformation and little grape shaped particles after sticking, average particle diameter is 0.1-4¦Ìm, total Zinc contain is more than 98.5%, metal Zinc contain is more than 96%.
Product Property: Molecular formula: Zn Molecular Weight: 65.38 Physical Property: light grey metal fine powder. Density: 7.14g/cm3 Melting Point: 419.4¡ãC Boiling Point: 908% Chemical property: insoluble in water, soluble in acid and alkali, slowly soluble in acetic acid, ammonia water, it has strong reducing performance and give out hydrogen. Lumps when being wet, keeps stable in dry air and generates white basic carbonate covering in its surface in wet air. When combusting in the air, it can generate blue green flame and generate zinc oxide. High pure zinc act slowly with sulfuric acid and nitric acid, while act fast when it contains few of other metals such as steel, tin and lead.
Product name: Medical protective mask(4-Ply KN95 Medical Respirator) in FFP2 Standard. Product model specifications: 17.5cm 9.5cm (single earband :18cm) Structural composition: The medical protective mask is composed of a mask body, a nose clip and a mask band. Scope of application: It is used to filter particulates in the air, block droplets, blood, body fluids, secretions, etc. in the medical work environment. Instructions for use: 1. Hang the mask strips on the left and right sides of the ears separately; 2. Align the nose clip to the nose, and gently pinch the nose clip to shape it, so that the nose clip is suitable for different face shapes; 3. Pull the fold of the opening mask and adjust it to seal the nose and mouth. Main performance: 1. The product should be sterile; 2. The residual amount of ethylene oxide should not exceed 10 3. Meet the requirements of China standard GB2626-2006 "Technical Requirements for Medical Protective Masks". with CE certification complied with standard FFP2 EN149: 2001+ AI:2009 Contraindications: None. Precautions: 1. Please read the instructions carefully before use, and use it within the warranty period. 2. This product is sterilized, aseptically packaged, and is only for one time use. Pay attention to check the packaging when using, if the packaging is damaged, it is prohibited to use. 3. After using this product, it should be disposed of as required by the medical institution or environmental protection department. 4. This product is disposable mask type. It must be replaced with a new one after being worn for 4-6 hours, and it can be discarded after use. Storage and transportation conditions: The packed medical protective mask is stored in a room with normal temperature, relative humidity ventilated and non corrosive gas. During transportation, it should be protected from moisture and sunlight. Packing : 3pcs/Individual bag, 500 bags(1500pcs)/Carton Carton Dimension : 60x40x50cm Gross weight: 9.05kg PRODUCT DISPLAY KN95 PARTICULATE RESPIRATOR
Magnesium sulfate, potassium sulphate sop, magnesium oxide, ferrous sulphate.
Rectangular transparent bird cage High-strength engineering plastics Waterproof, flame retardant and oxidation resistant High toughness Bending 180 degrees without damage
Place of Origin: China Brand Name: OEM Model Number: CVC single/double/triple lumen Disinfecting Type: Ethylene oxide Properties: Medical Materials & Accessories Size: 1-14G Stock: Yes Shelf Life: 5 years Material: TPU, ABS, 304 stainless steel, Quality Certification: CE/ISO Instrument classification: Class II Safety standard: ISO11070 Product name: TUORen Medical Disposable Central Venous Catheter CVC Kit Certificate: CE ISO OEM: Accept OEM Sample: Sample Offered Feature: Medical Treatment Use: Hospital Application Packing: individual package Usage: Single-use
Acrylonitrile-butadiene latex is a copolymer emulsion formed by emulsion Polymerization from butadiene,acrylonitrile and functional monomers in liquid form With milky color.lt has good rstorage stability and process operability.NBR latex polymer also has excellent oil resistance ,chemical resistance,crosslinking with sulfur and metal oxides,and good binding force with polar materials such as fibes and non-woven fabrics. The product has no llergic reaction to The skin,is resistant to pricking by sharp objects,and its tensile strength is better than that of natural rubber latex. lt is used as the key part of medical gloves applications etc.
Place of Origin: Jiangsu, China Brand Name: Anchen Model Number: GBN-14 Power Source: Manual Warranty: 3 years After-sale Service: Online technical support Material: Plastic Shelf Life: 3 years Quality Certification: ce Instrument classification: Class III Safety standard: YY/T1148-2009 Product name: Sternal Puncture Medical Biopsy Needle Properties: The Basis of Surgical Instruments Main material: 304 stainless steel Certificate: ISO,CE Sterilization: 100% Ethylene Oxide Size: 14G/16G/18G/20G Working Length: 100mm/150mm/200mm (customizable) Specimen retaining notch: 18-20mm Scope of application: Used for biopsies from soft tissue Specification: Lung Biopsy Needle, Pleural Biopsy Needle
