NICKEl - IRON ALLOY KOVAR Composition (Nominal): NI 29; Co17; Fe Balance;) ;(A low expansion alloy which has been widely used for making hermetic seals with the harder Pyrex glass and ceramic materials such as in power tubes, microwave tubes, transistors, and diodes, as well as integrated circuits. :) (Specifications: Kovar alloy is manufactured to meet the requirements of ASTM Specification F-15.
Ferrosilicon alloy is a deoxidizer used in steelmaking production. It improves the shape of inclusions and reduces the content of gas elements in molten steel. It is an effective new technology to improve steel quality, reduce costs, and save aluminum. It is especially suitable for the deoxidation requirements of continuous casting molten steel. Practice has proved that it not only meets the deoxidation requirements of steelmaking, but also has desulfurization performance and has the advantages of large specific gravity and strong penetrating power. The production of silicon-aluminum ferroalloy can be divided into the following three stages 1. Generation of silicon carbide At lower temperatures, SiO2 reacts with carbon to produce silicon carbide, 2. Generation of aluminum oxide carbides and carbides In the temperature range of 1600~2000�ºC, carbon reacts with aluminum oxide to form aluminum oxide and silicon carbide; 3. Intermediate compounds such as carbides decompose silicon-aluminum-iron to form. At a higher temperature, aluminum oxide, silicon carbide, aluminum carbide and silicon dioxide react to obtain silicon-aluminum; only high-quality silicon-aluminum ferroalloy can produce high-quality silicon-aluminum iron blocks. When purchasing silicon-aluminum iron balls, you need to pay attention to Its quality, the quality of silicon aluminum iron ball has a direct impact on its application.
SOFT MAGNETIC - IRON COBALT ALLOY Permendur 49 : (Composition (Nominal): Fe49; V2; Co49:) :(PERMENDUR 49 exhibit the highest magnetic saturation (2.4 T) of all soft-magnetic alloys. high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. : (Specifications: ASTM A801 Alloy Type 1 ; ( Please request a QUOTE for material Datasheet ?
Used for making precision tools
Nickel Iron Alloy 48 UNS K94800/ Nilo 48 ASTM F30 ; ( Composition (Nominal): Ni48 ; Fe Balance ; )Alloy 48 (Nilo 48) is a low expansion Nickel-Iron alloy. The coefficient of thermal expansion of this metal is designed to suit the CTE of soft lead and soda lime glasses. High Inflection point. Its service temperature goes as high as up to 450oC or 840oF. : (Product availability and request a QUOTE!
SOFT MAGNETIC IRON COBALT ALLOY Hiperco 50A ; (Composition (Nominal): Fe49, V2 , Co 49, :)Hiperco 50A Alloy is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (2.4T), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. :) Specifications: ASTM A801 Alloy Type 1 ;( Product availability and request a QUOTE!
IRON NICKEL ALLOY ASTM F1684 INVAR 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
IRON-COBALT VANADIUM ALLOY - P6 Alloy ; (Composition (Nominal) 6.00 Ni, 45.00 Co, 4.80 V, Bal. Fe; ) :(A ductile, semi-hard magnetic alloy which has been used in laminations for hysteresis motors. Alloy exhibits highest efficiency (loss per unit magnetic field strength) of any known material. :(Product availability and request a QUOTE!
ron Nickel alloy ASTM F30 alloy 46 ;( Composition (Nominal) Ni 46 ; Fe Balance: ( Alloy 46 is a nickel-iron controlled expansion alloy containing 46% nickel. It has a fairly constant coefficient of thermal expansion from room temperature up to 500 °C. ; : (SPECIFICATION: ASTM F30
Iron-Nickel-Chromium alloy NI SPAN C902 UNS N09902 .,;( Composition (Nominal): Ni 43 ., Cr 6., Ti 3. Fe Balance ., :( Ni-Span C902 nickel iron chromium alloy is precipitation hardenable. It can attain controlled thermoelastic coefficient and static elastic modulus at temperatures from -50° F to 150° F. The main constituents of alloy are iron, nickel and chromium with nominal traces of titanium and aluminum. These elements produce a reddish-brown oxide layer upon exposure to natural conditions since it does not have the same qualities as stainless steel. Additionally, nickel iron chromium alloys feature nominal expansion after hot and cold processing. (Product availability and request a QUOTE!
IRON NICKEL ALLOY SUPER-INVAR 32-5 ; (Composition (Nominal): 0.02 C, 0.40 Mn, 0.25 Si, 32 Ni, 5.5 Co, Bal. Fe ; : (Super Invar 32-5 is A low expansion alloy consisting of 32% Nickel, 4% Cobalt, and balance Iron. Super Invar 32-5 Alloy exhibits minimum thermal expansion at room temperatures (one half of Invar 36), as well as thermal expansion properties less than that of Invar Alloy in the 67/203°F (-55/95°C) temperature range. ; (Specifications: ASTM F1684 ;: (Product availability and request a QUOTE!
Glass Sealing 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( Alloy 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
INVAR 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( INVAR 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
NICKEL IRON SEALING ALLOY 52 ; (Composition (Nominal): Ni 50 , Fe Balance . ;( Alloy 52 is a 50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy's rate of thermal expansion is virtually constant to a temperature of about 1050 °F (565 °C). ;(Specification : ASTM F30 ; ;(Product availability and request a QUOTE!
Nilo 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( Nilo 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
Cast Iron The scrap of the rolls contains many alloy additives such as Cr 2.5% -3.5% Ni - 0.8% - 1.5% Mo - 0.2-0.5%. V 0.2% - 0.8%. The roller consists of a cast iron core with C - 3.2% and a cast steel shell with C - 1.2%. There are always higher alloying elements in the roll shells. Scrap especially profitable for quality steel mills Cast iron alloy scrap price 270 Euro exw
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. The Incoloy825 has the following functions: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion Good oxidation resistance and non oxidative thermal acidity. It has good mechanical properties at room temperature and high temperature up to 550 Certification of pressure vessels with manufacturing temperatures up to 450 C Incoloy 825 metallographic structure: Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization. Incoloy825 Corrosion resistance: Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550. Typical applications include: Heating pipes, containers, baskets and chains for sulfuric acid pickling plants. Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline. Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production. Air heat exchanger in petroleum refining Food Engineering chemical process Flame retardant alloy for high-pressure oxygen Product name INCOLOY Alloy 825 Grade INCOLOY Alloy 825 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade Cu Ti AI P C Ni Cr Mo INCOLOY Alloy 825 2 0.8 0.1 - 0.02 42 21 3
IRON NICKEL ALLOY ASTM F1684 Nilo 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
IRON NICKEL ALLOY ASTM F1684 PERNIFER 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
