CALCICOATTM calcium chloride (CaCl2) is a white, high purity granules with 94 to 97 weight percent CaCl2. It has the following features when compared to its nearest competitor: When sprayed, the shape of granules makes them more controllable than powder shape. Higher concentration of calcium chloride gives a higher heat of dissolution, promoting faster melting and higher penetration rate as a deicer. CALCICOATTM Calcium chloride is used in petroleum industry as drilling mud additive and drying petroleum fractions, in cement manufacture to low alkali and acting as a source of chloride. To melt the Highway ice for sidewalks, parking lots and driveways. This high energy should be sprinkled lightly and evenly over ice surfaces at an application rate of about 2 pounds per 200 square feet. Thawing begins immediately.
DCP is a DiCalcium phosphate Dihydrate product, with the formula CaHPO4.2H2O, with minimum 18% P content and up to 25 % Ca content. Dihydrate means 2 molecules of water inside the phosphate and higher digestible product. The product has the highest digestibility of any DiCalcium phosphate one can find in the market. Purity is closely correlated with bio-availability of phosphorus. In the traditional process the more contaminated are the raw material, the more indigestible elements the feed phosphate will contain. This is not the case with our used processing technology. DCP is the best option to be easily used with compound feeds, premixes, and concentrates to cover the nutritional requirements of both phosphorous and Calcium in poultry, ruminants, pets, and aquatic animals.
Linear alkylbenzene (LAB) is found in all kinds of detergent formulations like for household, laundry, dishwashing. (LAB) is a basic raw material to produce linear alkylbenzene sulphonic acid (LAS). After neutralization it is the most common active ingredient in biodegradable detergents. Heavy Alkyl Benzene (HAB) is a by-product in the process of linear alkyl benzene (LAB) production. It is the main raw material for lubricants, metal surface treatment products, including galvanic and electroplating products and Hydraulic fluids.
The fertilizer numbers, which are always in the same order (N-P-K), tell you how much nitrogen, phosphorus, and potassium are in the fertilizer. They may be whole numbers or decimals and might be the same number, like 10-10-10, but often are three different numbers. Itâ??s even possible to have one or two of the numbers be zeros. The numbers are a percentage of how much of each nutrient is in the fertilizer. Since the numbers are a percentage by weight, the higher the number, the more of that nutrient there is in the fertilizer. A 20-20-20 fertilizer has twice as much NPK in it as a 10-10-10 fertilizer.
Urea ammonium nitrate solution, commonly referred to as UAN, is a liquid nitrogen fertilizer which is made up of a mixture of urea, ammonium nitrate and water. Nitrogen fertilizer is responsible for the production of amino acids and proteins and indirectly supports the production of vitamin B. Nitrogen application is the main factor to improve plant growth, development and yield of all crops. Usage: The use of modern crop application methods of UAN are designed to provide very precise application of UAN to the crop. Furthermore, UAN applications can provide better economics for the farmer than dry fertilizer applications because the farmer can add other crop protection products like herbicides, insecticides and fungicides to the UAN and can be applied to the crop in a single application.
Urea is the highest nitrogen (46 %) content fertilizer that makes it one of the most vital fertilizers for crops in agriculture. Our supply of Urea from Egypt and MENA region reaches the shores of North America, LATAM countries, Asia, and Europe (Reach Number is available). Product Characteristics: Nitrogen: 46% min. Moisture: 0,5% max. Granulometry granular (between 2 - 4 mm): 90% min.
Sodium Fatty Acid Methyl Ester Sulfonate, MES 70% paste Essential details Classification: Sulfonic Acid CAS No.: 27176-87-0 Other Names: LABSA,DBSA,DDBSA MF: R-C6H4-SO3H(R=C12) EINECS No.: 204-489-3 Grade Standard: Industrial Grade Purity: 96% Appearance: brown adhesive liquid Application: Washing Powder & liquid detergent Product name: LABSA Production standard: international standards Surfactant: Anion Surfactant Feature: High purity Sulfonic Acid Purity of Sulfonic Acid: 96% Supply Ability 5000 Metric Ton/Metric Tons per Month Packaging Details 210kg/drum: 16.8MT/20'FCL 1000kg/IBC: 18MT/20'FCL Hot sale daily chemical & detergents LABSA 96 Storage of labsa: Store labsa in dry and cool place, kept away from sunshine and rain. 1. Product identification of Sulfonic Acid LABSA 96% Product name Linear Alklybenzene Sulphonic Acid Chemical synonym LABSA Formula RC6H4SO3H, R=C10H21-C13H27 Properties Brown Viscous liquid; Boiling Point(�°C): >100; Specific Gravity/Density (g/ml): 1.029 HS No. 34021100 CAS No 27176-87-0 EINECS No 287-494-3 2. Specification of Sulfonic Acid LABSA 96% Item Specification Measuring Method First class quality Qualified product Alkyl benzene Sulfonate(%) â?¥96.0 â?¥96.0 GB/T 8447 Color Klett 20 Max 40Max Free Oil (%) 1.5Max 1.8Max Sulfuric Acid (%) 1.5 Max 1.5Max Chemical Formula R-C6H4-SO3H Appearance 25 C The viscous liquid with pale yellow and brown CAS No. 27176-87-0
Lithium ore IN NATURA for lithium carbonate > Lithium hydroxide > Lithium spodumene The price for lithium carbonate and lithium hydroxide is index SMM minus 5%. Depending on the quantity per month in (MT) tons, the commission can be negotiated can be negotiated with the supplier, origin from Brazil The producer processes the extracted rock into sand for further processing. The quality then corresponds to 99.92 technical or 99.95 battery quality after further processing 99.95 battery quality. Lithium carbonate is supplied in these grades. Lithium hydroxide will reach 56%. Delivery as containerized goods Prices are CIF, require port of destination where the goods are to be delivered to - Buyer specifies quantities - Price renegotiation possible depending on quantity - need concrete information from the buyer about quantity - term of the supply contract, etc. - All questions will be answered by the manufacturer - Please submit your request or questions in writing - Link to the video of one of the manufacturer's stockpiles Offer on lithium (oxide + carbonate) IN NATURA: (the material is considered one of the best in the world!). It is not processed lithium carbonate... it is IN NATURA. 1) CONTENT: Li2CO3: 50-53% / Li2O: 2.0-2.5% / lithium silicate 46-48% (in this lithium silicate there are microparticles of spodumene and other microparticles). 2) GRANULOMETRY: 1.0-100mm (exactly as shown in the video). - QUANTITY: 50.000 - 55.000 MT PER MONTH (X12 MONTHS) - PRICE AND INCOTERM: ca. USD/TON CIF - Destination / Port? - TERMS OF PAYMENT: > Payment with LC: 30% upon order placement before loading, 70% in port before export > Payment with SBLC: also possible with TOP Bank positive credit report NATURA / raw product (ore) = the buyer processes it directly into the desired end product(s), e.g. lithium carbonate, lithium hydroxide, lithium spodumene For larger quantities of lithium ore, the buyer additionally filters out the microparticles of spodumene and other microparticles via his equipment and thus generates a greater profit through additional end products. Minimum purchase per month = 50 MT Info: the formula states that 1 ton yields 500 kg of end product plus rare earths Annual contract possible, price agreement possible directly with the owner / geologist for corresponding purchase quantities. Basic condition is NCNDA, LOI with quantity specification, desired term/delivery contract
We have direct contacts with several refineries and can therefore offer any type of fuel..( Jet Fuel , D6 ,EN590 ..etc..) at good market prices. If you have any questions, please contact me via Whatsapp or by mail. NON-Russia..
SOYBEAN GMO SPECIFICATION: (1)Seed Coat:Yellow or light yellow, navel yellow or light brown--- (2)Grain :No less than 98%--- (3)Kernel :Pure kernel--- (4)Yield :98% minimum--- (5)Insect-bored kernel :0.5% maximum--- (6)Spotted/moldy kernel :O.2% maximum--- (7)% of perfect kernel :98% maximum--- (8)Sprouted Kernel: None--- (9)Inorganic impurity: None, no dirt, sand, brick tiles, or others--- (10)Metal impurities:none------------Price:CIF 965USD/MT
SPECIFICATION:--- (1) FATTY ACIDS(F.F.A): 0.1--- (2) SPECIFIC GRAVITY (25 176C): 0.915 - 0.922 --- (3) MOISTURE: 0 --- (4) UNSAPONIFICABLE: 2.0 MAX --- (5) IMPURITY: 0 --- (6) SAPONIFICATION VALUE: 187-193 --- (7) PEROXIDE VALUE: AT THE TIME OF LOADING MAX 1 --- (8) REFRACTIVE INDEX(25 176C): 1.47-1.474 --- (9) IODINE VALUE: 103-128 --- (10) ODOUR DEODORISED TITRE: 14-20 --- (11) TASTE: BLAND ----------------PRICE:CIF 915USD/MT
Crude Oil
Crude oil.
Crude oil 2000000 bbls per month on CIF /TTO terms
Unrefined sunflower oil, from 3.000 mt per month, production of Ukraine, harvest 2021, bulk container, FCA/FOB.
VELESA-LYON Company is a full-service agricultural commodity trading company handling Wheat, Corn, Sunflower, Soybeans, and Rapeseed from origination and marketing to financing and logistics. NUTRITION FACTS PER 100 GRAM Energy 894 kcal (3674 Kj) Protein 0 g Monounsaturated fatty acids 34 g Polyunsaturated fatty acids 56 g Saturated fatty acid 10 g Trans fatty acids 0 g Cholesterol 0 mg Carbohydrate 0 g Fiber 0 g Sodium 0 mg Price and delivery condition are individual (depend on quantity, quality and destination).
VELESA-LYON Company is a full-service agricultural commodity trading company handling Wheat, Corn, Sunflower, Soybeans, and Rapeseed. Price and delivery condition are individual (depend on quantity, quality and destination). NUTRITION FACTS PER 100 GRAM Energy ; 895 kcal (3678 Kj) Protein : 0 g Monounsaturated fatty acids : 24 g Polyunsaturated fatty acids ; 59 mg Cholesterol : 0 mg Saturated fatty acid : 17 mg Carbohydrate : 0 mg Trans fatty acids ; 2,6 mg Fiber ; 0 mg Sodium : 0 mg
VELESA-LYON Company is a full-service agricultural commodity trading company handling Wheat, Corn, Sunflower, Soybeans, and Rapeseed. Price and delivery condition are individual (depend on quantity, quality and destination). NUTRITION FACTS PER 100 GRAM Energy 895 kcal (3678 Kj) Protein 0 g Monounsaturated fatty acids 30 g Polyunsaturated fatty acids 57 g Saturated fatty acid 13 g Trans fatty acids 0 g Cholesterol 0 mg Carbohydrate 0 g Fiber 0 g Sodium 0 mg
Base Oil
We sell Grade A Quality Refined Sunflower Oil. Refined sunflower oil characteristics Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None - not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Fatty acid composition : C14:0 :0.06 C16:0 :5.77 C18:0 :4.1 C18:1 :27.3 C18:2 :59.2 C20:0 :0.27 C18:3 :0.25