Stamped and certified protective materials including; kn95 disposable surgical filterable half mask, n95 critical health care filterable half mask health care surgical mask, protective gown, hand sanitizer, security glasses.
Alcohol hand sanitizers, working gloves.
The line is designed to fill beer in to three different type of 0,33 litre glass bottles, label the bottles neck around and lower body small around and pack the bottles in to 4 x 6 bottle cartoon boxes. This bottling line capacity is 20000 bph. Clean glass bottles were brought on wooden pallets to depalletizer which feed them to the filling lines. Innofill DMG bottle filling machine and Handtmann MMS filtration system are located in a clean air room. KHS lamella conveyor system for bottle transport and cartoon boxes. The equipment were totally delivered by German KHS in year 2003, most of machines manufactured in year 2002. All control units are Siemens Simatic S7 model with remote connection. The line was shut down in year 2008 and it is still installed and in very good operational condition. Main equipment are: - Bottle Depalletizer KHS AL, semiautomatic - Micro Filtration Handtmann MMS 130 - Filling Equipment KHS Innofill DMG (rinsing, filling and capping) - Labelling Machine KHS Innoket 2060 - Cartoon Box Forming Machine KHS Innopak CA-1 - Bottle Packing Robot KHS Innopak SP 1200 - Box Marking System - Case Sealer KHS Innopak CV.
High Frequency Mobile C-Arm System
Krones Toptronic K 719-555 Rotary Empty Bottle Inspector The Toptronic inspector is made for inspecting empty returnable PET bottles and empty non-returnable and returnable glass bottles. It utilizes state-of-the-art camera technology to provide precision empty container inspection. The sophisticated inspection modules detect even the tiniest damage or contamination – both in glass and PET returnable bottles. General design features Modular design Table top cover and stand cladding in stainless steel Safe bottle guidance with Raptec handling parts Blower for removing foam and lubricant residues from the container base Enclosed and air-conditioned electronics cabinet Electronic function monitoring Stop function upstream of machine infeed in response to fallen-over containers Rejection unit with retaining bar or clamping starwheel This unit has been in operation only with PET bottles sizes 0.5 liter (four different types), 1.5 liter ( two different types) 1.0 and 1.25 liter bottles and it has been in operation since 2002 and is still in very good operational condition. Handling tools for above mentioned PET bottles will be a part of delivery. Technical specification: Manufactured by: Krones AG, Germany Manufactured in: 2002 Model: K 719-555 Nominal output: up to 72000 bph Actual output: 35000 bph (with clamping starwheel) Inspection units (PET) For foreign containers P.E sensor and camera Base 1 Camera Variostation 1 Camera - sealing surface Residual liquid High frequency + infrared Side wall Camera Optimized scuffing Camera Variostation 2 Camera - Base 2 - inner side wall - full thread Variostation 3 Camera - full thread - lateral neck finish - inner side wall Variostation 4 Camera - sealing surface - lateral neck finish Equipment for SaleGeneral Industry Textile Machinery Process Equipment Energy & Power Wood Working.
Technical Specifications: Product name: FIR65 - Energy Blanket Active Edition GS1/EAN-code: 6430037210037 Dimensions: 200cm*92cm The product dimensions spread open: 200cm*190 cm The product weight: 7.4 kg Operating temperature: 30ºC-60ºC Voltage: 100V~120V 60 HZ, 220V~240V 50HZ Output voltage: AC 240V, 330W (maximum) Time function: 5-95 minutes Control unit: One-channel adjustment (temperature | time) Safety: The product is UL safety approved. The product is waterproof, soft and flexible Materials: Nylon, polyurethane cloth, space carbon fiber Approvals/Certificates: CE, TUV, UL, CCC Test in Finland: Kuortane Testing Lab, University of Jyväskylä Manual: FI,EN,SE,DN,NO,DE,RU,NL,FR,IT,CZ,ES,EST Guarantee: 1 year Product Package Size: 46*25*52 cm Package Weight: 8 / 7,4 (net) Delivery Carton: 3 pcs Delivery Carton Size: 80*47*54 cm Delivery Carton Weight: 24 kg System Composition and Functions: Digital Handheld Controller: adjusts and controls the temperature and timer settings of the blanket. Power Box: supplies main power to the hand-held controller. Energy Blanket: conducts FIR heating to the body. Made of PU (polyurethane) fabric, and a sponge layer (XLPE cotton) with canvas lining, with heating elements of carbon fiber. Power Cord: supplies main power to the control box. Connection Leads: connects the thermal blanket to the control box. Innovated FIR65 Technology.
Thinners varnishes paints for furniture, handles, knobs, sofs, springs and fittings chair, basemants, castors, sand papers, mdf boards, melemine boards, plywoods, veeners, furniture, steel tubing various sizes uppholstyry( sofa).
Plasmatreat FG1002 pre-treatment and cleaning unit This flat surface pre-treatment and cleaning unit with open air / atmospheric-pressure plasma technology was originally made by Plasmatreat company in 2004, manufacturer's model FG1002 with Siemens PLC control system and then in year 2008 it was refurbished with new plasma nozzle directing robot and an aluminium profile structured operation table. The unit has two plasma nozzles and it has been used on occasionally and is in excellent condition. The equipment has CE marking and proper documentation, including wirering diagrams This machine is designed to pre-treat and clean any metal, aluminum, plastics (such as PP and EPDM) or glass surface free from grease, dust and other unwanted materials and to pre-treat material surface for ensuring the adhesion of surface coating to these materials. Plasmatreat process also allows to use environmentally friendly water-based painting for coating and due to the fact that cleaning with plasma is a dry process immediate further processing of the materials is possible. For more information, please visit manufacturer's web page www.plasmatreat.de Technical information: Manufacturer:Plasmatreat Company Model:Plasmatreat Openair® FG 1002 Serial number:695 Year of manufacturing:2004 / 2008 Operation table size:1600 x 3000 mm Electricity connection:3~/ 400V / 32 A Condition:Used, excellent.
Kisters Wrap Around Packer 310 Kisters fully automated wrap around packer model 310 is a single-lane, high-performance packing robot for producing wrap-around and tray packs from stable individual products. It can handle tins, cans, jars, glass and PET bottles, as well as pre-packed products from the beverage, hygiene and food processing industry with high packaging speeds. It can process flat corrugated cardboard and full carton blanks in different qualities. In each case, the carton is folded tightly around the product groups and subsequently glued with hotmelt and it has a large and easily accessible cardboard blank magazine. Optimum packaging results are achieved in conjunction with the precise cardboard blank guides and the exact folding process. Wrapping robot can handle a wide range of formats. The unit is PLC-controlled and it can be easily adjusted for other packing formats. This machine has been packing beer tins (12/24 x 0.3 liters and 12 / 24 x 0.5 liters) into cartoon wrap-around packs at speed of 60 packs / min. This unit was in full operation till beginning of November 2010 and is now dismantled and stored. Technical Data Manufacturer: Kisters Machinenbau GmbH (Nowadays KHS ) Model: Wrap Around Packer 310 / 100 Year of manufacture: 1994 Serial number: 941782 Capacity: upto 60 cycle / min Electricity: 16 kVA, 400 V / 50 Hz
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets. More information on requests, for spam protection please introduce yourself properly. Main data of one mill: Manufacture’s type: NTK 130F/LM Year of manufacture 1988 Total operating hours: approx. 75000 Rated capacity, max: 145 kW Number of blades: 3 pcs Rotor diameter: 22 m Rotor speed: 44.5 rpm Cut-in wind speed: 4.0 m/sec Cut-out wind speed: 53 m/sec (120 mph) Hub height: 26 m Generator: ASEA 145 kW / 1500 rpm / 50 Hz Blade type: LM 9.7 m H/H/T diam. 21 m Gear box type: Lohman & Stolterfort GPC 145 Clutch type: Lohr & Brokamp Universal Joint No 105 Total weight: 15200 kg.
Selling top quality KN95 face mask tested in Finland by Technology Research Center VTT and Eurofins Scientific Group. Tested filter effectiveness of the KN95 mask is 98%. MOQ: 1 million pieces Delivery time: Within 10 days Please contact us with purchase order quantity to receive further information. We look forward to hearing from you!
New high purity copper material has superior low temperature property exceeding rrr (residual resistivity ratio) 3000, and has been adopted for special applications, for example, components for cryogenic refrigerator and materials for r&d in the field of space technology. the cable for high end audio cables has a controlled crystal structure and minimizes transmission loss. we manufacture products such as spreader, wire rope, blocks and various shapes, all easily needed. feel free to contact us..
We are offering high-quality berry products from Finland, all products have the necessary certificates as well as product specifications. Our partners operations comply with the FSSC 22000 Food Safety Management System. The factories of our partners is also both Kosher and Halal certified. Raw materials of products are collected from Eastern / Northern Finland, mechanically cleaned, sorted by color and pre-washed before processing. Before the coming harvest season 2021, we will be able to offer: Berry powders packed in 10kg sacks: Lingonberry powder Bilberry powder Cranberry powder Buckthorn, powder Dried berries, packed in 10kg sacks: Dried Lingonberry Dried Bilberry Frozen berries IQF, packed in 25kg sacks / 500kg container: Blueberry Lingonberry We also offer a wide variety of other berry products in harvest season, if you have something specific in mind, and if you have analysis etc. requirements, please do not hesitate to ask. We will be happy to provide more information and pictures about the products as well as prices for them if you are interested.
R-steel threaded lifting devices including several options as wire loops, wire loops equipped with a pressure plate and full metallic lifting devices, are designed to transport and erect precast units and elements. R-steel lifting devices have been designed and tested according to european quality standards to ensure safe precasting and lifting. - wire loops are manufactured of high-quality steel wire which are more suitable for on-site high loads such as beams. It can be equipped with a pressure plate for different lifting angles. - full metallic lifting devices equipped with pressure plate are designed for the lifting of 0 - 90 angles. The free turning swivel can also be used for turning precast elements. - all threaded lifting devices are easy to install and can be recessed if required, they can be used with all sizes of threaded inner socket anchors. - inner socket anchors are provided separately from lifting devices and it's highly recommended to use co-ordinated lifting system units for the safety of your precast site. Nailing plates, socket magnets, and plastic caps are also available. - tailor made solutions are also available.
Fertilizers e.g. granular urea 46%, naphtha pe wax, pe, iron ore pellets, sulphate mix xylene, sulphur (granular & lump) , hydrocarbon, soda ash, sodium sulfide flakes calcium chloride, labsa, methanol, micro crystalline wax, sles, gilsonite, acetic acid sulphuric acid, mazut, petroleum jelly , bitumen, white spirit, paraffin wax, rpo diesel , base oil (virgin & recycled), liquid paraffin, teg, deg, petroleum coke, glass (automotive & bulletproof).
Rubber material products : wheels, tiles, blasting mats, parking curbs.
Granular Urea 46% Fertilizer - Biuret ; BS EN 15479, ISIRI 75 ; Max: 1% w - Free Ammonia ; Laboratory manual Vol 2.1 Proj-PM-012 Lab Test Methods Rev. 1/14 Feb. 2006 (in-house method) ; Max 100 mg/Kg - Formaldehyde ; HFT-00022/23.8.2001 (in-house method) ; 0,45-0,55% w - Particle Size Distribution ; ISO 8397, ISIRI 75 ; Min: 90% w 2-4 mm Dust (
