Product features: Dimension: Living area: 174,5 m2 Gross floor area: 202 m2 Material: The material used for the logs is Lapland's red-hearted pine. Laplands red-hearted pine has grown slowly into tight-grained Product features: wood in northern Finland; experts value this pine worthy of hardwood. Over the years, the red-hearted pine does not weather like pine that has grown quickly in lush areas, but reddens beautifully, as its name suggests. The slow growth rate and the large proportion of heartwood cause this effect. Even in extreme conditions, red-hearted pine cracks considerably less than an ordinary log. Moreover, the sagging of timber, which happens in log cabins over the years, is of minor effect in red-hearted pine compared to an ordinary log. That is why it is a unique and a truly lasting building material. Log dimensions: For all the log houses that Pellopuu produces there can be chosen for the following dimensions (width/height): ò 88x170mm ò 114x170mm ò 136x170mm ò 202x220mm ò 240x220mm all the log packages are packaged in water tight paper
This laminating tunnel / convection oven is made by Swedish TRIAB / Tri Innovations AB in year 2006. The oven is designed for industrial use and in build up in two separable laminating sections, both equipped with one 40.5 kW hot air sections, one product and one return conveyors and common control unit. All product touching parts are made either of stainless steel (structures and panels) or Teflon made net belts. Convection belt (600 mm wide) is located inside of the oven tunnel and has grid type surface, the return conveyor is installed on the tunnel and it has tight waived Teflon belt. The control cabinet is attached to the equipment structures. The speed of laminating conveyor is adjusted with an inverter driven motor. The speed of return conveyor can be fine tuned via a potentiometer. The equipment is featured with a remote control possibility. This has been operating with hygienic products (material foam / polyurethane film, thickness 5 mm, max. width 450 mm and production speed 6 m/min) and is in excellent operational condition with total 3450 operating hours only and it comes with original operation manual in English language. Technical data: Made by: TRIAD / Air Innovations AB Manufacturing year: 2006 Total operating hours: 3450 Convection capacity: 2 x 40.5 kW Process control PLC: Eurotherm 2216e Hot air circulation volume: 2 x 9000 m3/h Fan electric power: 2 x 2.2 kW Temperature range: 50 – 150 C Total machine length: 10 000 mm Total machine width: 1600 mm Convection belt material: Teflon covered metal net Convection belt length: 9 000 x 600 mm Convection belt speed: 3 – 8 m/s / 0.25 kW, inverted controlled Heated width: 650 mm Inside / free height: 80 mm (from belt to nozzles) Return conveyor: Habasit FAB-8EO WV Return conveyor dimensions: 12000 x 600 mm (Teflon) Return conveyor drive: 0.25 kW, 380 V/50 Hz.
Compressors units (totally 4 pcs) are built by York Sabroe in 2002 and 2003 and they operate with R22 refrigerant. Two identical SAB 128 HF screw compressor units are built on a common base frame with an integrated horizontally mounted oil separators, oil circulation pumps and local operating panels. Common (for two compressors) plate type Freon / Glycol evaporator, internal glycol circulating pump and one large Freon buffer tank is also build on the same base frame. Delivery includes also evaporative condenser and LV / Control cabinet and external glycol circulating pump. Above described 2 x SAB 128 HF packages we have two for sale, one made in year 2002 and the other year 2003. Both packages are still installed and can be tested in mutually agreed time. Units have been in operation approx 6 years and 5 years and they are in very good condition. Technical data Number of compressors - 4 pcs Compressor type - SAB 128 HF Refrigerant - R 22 Cooling capacity - 4 x 379 kW ( 0 /+40C) Swept volume - 4 x 454 m3/h Electric drives (compressor) 4 x 110 kW - 400/690 V 50Hz (also suitable for 60Hz) Freon buffer tank -2 x 1650 liters Plate evaporators - Alfa-Laval M10-BW FGR Evaporative condensers - 2 x BAC VXC 116 Closed Circuit Condenser fans - 1 x 17 kW and 1 x 4 kW for each Condenser circulating pumps- 2 x Grundfors LP80 - 25/133 Glycol pumps - 2 x Grundfors LP 80 - 25/133 2 x Hilge Mahana 65-160
Industrial Crane Konecranes CTX 10 t, Dual Bridge with 33.6 m span The crane was manufactured by Konecranes Oyj in 2001 and the operation was stopped in year 2006. The equipment was regularly serviced by the manufacturer and is thus in excellent operating condition. The crane is still installed in its original place and can be tested on any time. The double bridge is welded housing construction equipped with one double speed wire hoists and a motorized rail equipment on both ends. The crane has both the local wire connected control unit as well as the wireless remote controller. On the bridge there is a service platform and the local LV û and control cabinet. All electric motors are dimensioned in accordance with Industrial Heavy Duty ED classification. The equipment includes the crane moving rail which will be sold separately. Technical data: Manufacturer's type:CXTD10t x 33.6m Hol: 6.1m Lifting capacity:10 000 kg Span distance:33.55 m Lifting class:FEM M5 (2m) Bridge structure:Welded case Total weight:Approx 22 000 kg Type of wire hoist:XL 404N40BDA4 Lifting height:6.1 m Lifting speeds:8.0 and 1.3 m / min Wire hoist speeds:32 and 8 m / min Bridge speed:Inverter controlled, max 40 m / min Wire hoist lifting motor:Double power 15 and 2.5 kW (60% ED) Wire hoist moving motors:2 x 0.65 kW (40% ED) Bridge moving motors:2 x 1.8 kW (40% ED) Total power need:19.9 kW / 400 V / 50 Hz Crane moving rail:60 x 40 cm, length 2 x 140 m.
Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets. More information on requests, for spam protection please introduce yourself properly. Main data of one mill: Manufacture’s type: NTK 130F/LM Year of manufacture 1988 Total operating hours: approx. 75000 Rated capacity, max: 145 kW Number of blades: 3 pcs Rotor diameter: 22 m Rotor speed: 44.5 rpm Cut-in wind speed: 4.0 m/sec Cut-out wind speed: 53 m/sec (120 mph) Hub height: 26 m Generator: ASEA 145 kW / 1500 rpm / 50 Hz Blade type: LM 9.7 m H/H/T diam. 21 m Gear box type: Lohman & Stolterfort GPC 145 Clutch type: Lohr & Brokamp Universal Joint No 105 Total weight: 15200 kg.
Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost. This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed. The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures. The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively. Technical Data Manufacture's type: EB 420 Compact Omega plus 53 Manufactured in year: 2005 Suction capacity with max vacuum:38,0 m3/min Power demand max: 40,3 kW Rotor's rotation speed 4120 rpm Max suction vacuum: 0,53 bar (abs.) Discharge pressure: 1,0 bar (abs.) Max pressure increase: 470 mbar Temperature rise max -t: 82 K Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A Electric motor nominal speed:2965 rpm Protection class: IP 55 Inverters: Mitsubishi FR-F740-01160-EC Case ventilation fan: 370 W û 50 Hz / 230 / 400V Weight blower with the case:1120 kg Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S) Noise level: 99 dB (A) Noise level with the case: 84 dB (A).
Fishmeal, rendered tallow, lard, fish fat, coconut oil, PFAD, biodiesel, used cooking oil.FOB, CNF, CIF
We are in the raw material business for wetsalted hides and skins. We can offer hides from Cattle and cows, and also skins from sheeps and lambs. We also are the biggest supplier of wetsalted headskins from Cattle and Cows. We can supplie 4-6 container monthly. Please send us your e-mail for more details.'
The system is mainly used for the real-time monitoring and analysis of ECG when human body during moving state, and it can be carried out the auxiliary diagnosis of CHD (coronary heart disease) and LCHD (latent coronary heart disease), and assess the severity of coronary artery stenosis, and detect the patient's heart function and exercise tolerance, dynamically test the therapeut
Buyers Purchase Order to Be Received. Confirmation of the Accreditations Hold by the Freilager Warehouse or the Warehouse Where the Goods Are Stored Confirmation by the Seller Through a Notary That the List of the Materials (Quantity,nr of Ampoules and Relevant Serial Number, Certificate of Analysis and Weight for Each Ampoule, Number of Boxes and Number of Ampoules Contained in Each Box ) Is Stored at the Adderss of Zuricher Freilager, Freilagerstrasse 47 Ch-8043 Zurich Ch, in the Warehouse Number 123 Under the Custody of Mr Red and Mr White, a Storage Contract to Be Shown, Free of Any Liens Incumbrancrs Plrdges or Any Other Legal Instrument Limiting Its Possession and the Possibility to Sell by the Seller to the Buyer Declaration by the Warehouse, With an Officially Issued Stock Report, That the Storage of the Goods Is Paid in Full and That the Goods Are Free to Be Transfered Confirmation by the Warehouse About the Quantity of the Material Stored There, Batch by Batch, Certificates of Analysis and Origins Customs Invoices at Entry in Ch and Any Other Document Which Is Requested by the Buyer for the Export, Also Confirming That the Material Is Legally Stored and Declared in Switzerland List of Documents Requested by the Buyer to Sell and Pay the Product Incoterms Exw Zuricher Freilager Payment Againt Conditional Release by the Warehouse if the Credential Are Accepted , Buyer Pays Team , Team Pay Seller All the Transactions on the Same Buyers Bank Branch We Can Instruct the Warehouse to Sample the Material in Case Buyer Wants to Do So, the Sample to Be Analyzed Must Be Paid to the Buyer
Orders from 30000 boxes up to 20M boxes. Ready stocks in Helsinki, Finland. Price starting: 8$/box Our company Lakkapaa Oy and Lakkapaa import Oy is well rated company in Finland, our annual turnover is over 70 million euros with over 10 years experience on import and export with PPE products. We are exclusive distributor for Walletz gloves for EU and certified importer for Intco gloves for EU. Both brands are well knowing premium quality pure nitrile gloves, stable deliveries with secure payment terms. Both brands are widely accepted with government hospital standards in EU and USA. Buying process is easy and fast from our large warehouse in Helsinki, Finland and we also do direct shipping with DAP terms directly from factories. We can deliver worldwide with fast and professional customer service and very competitive pricing. Regulations/and/standards: Category III (EU regulation22016/4252for PPE) Category I (CE mark for medical devices2 EU 2017/745) FDA 510K for medical use EN 16523J1J2015, ASTM 6319, EN 420, EN 455J1/2/3/4, EN 374J1/2/4/5 AQL 1,5 All sizes have own REF number2 and EAN2code LOT numbers Shelf life 5 years CE certificate by SATRA2Notified Body in accordance with EU regulations EU Regulation 10/2011: EN 1186 (aqueous and fatty foodstuffs) Manufacturing/documentation: ISO 9001 CE Declaration of Conformity US FDA standards: ASTM D6319J19 US FDA 21 CFR 177.2600
Organic & conventional spices, herbs, grains & pulses, chilli flakes, dry chillies, chillies powder, turmeric finger, turmeric powder, cumin powder, cumin seeds, fennel seeds, cardamom, ginger, celery seeds, curry powder, black cumin, nutmeg, mace, pepper, curry leaf, dill seeds, coriander seeds, coriander powder, garlic, tamarind, bay leaf, cloves, fenugreek seeds, mustard seeds, ajwain seeds, caraway seeds, black salt, cinnamon, saffron, onion powder, onion flakes, tomato powder, amchur powder, beet root powder, chana masala, garam masala, vegetable masala (sabzi masala), meat masala, fish masala, sambar masala, chaat masala, chicken masala, biryani masala, pani puri masala, maggi masala, peepramul powder, oregano, thyme, basil, parsley, rosemarry, asafoetida powder, cinnamon powder, chhole masala, pav bhaji masala, kitchen king masala, mutton masala, tandoori chicken masala, seasoning, piri piri spice mix, sage leaves, fenugreek leaves.
Our company provides Chaga mushroom from the wild forest and we are located in Finnish Lapland. Our Chaga is 100% natural and we can supply it as a powder or as a chunks. Minimum order is 10kg. Price for 250g of powder is 160 euro.
R-steel threaded lifting devices including several options as wire loops, wire loops equipped with a pressure plate and full metallic lifting devices, are designed to transport and erect precast units and elements. R-steel lifting devices have been designed and tested according to european quality standards to ensure safe precasting and lifting. - wire loops are manufactured of high-quality steel wire which are more suitable for on-site high loads such as beams. It can be equipped with a pressure plate for different lifting angles. - full metallic lifting devices equipped with pressure plate are designed for the lifting of 0 - 90 angles. The free turning swivel can also be used for turning precast elements. - all threaded lifting devices are easy to install and can be recessed if required, they can be used with all sizes of threaded inner socket anchors. - inner socket anchors are provided separately from lifting devices and it's highly recommended to use co-ordinated lifting system units for the safety of your precast site. Nailing plates, socket magnets, and plastic caps are also available. - tailor made solutions are also available.
We sell stock lots of fabrics (all kinds of types/blends). The fabrics are past season fabrics, production surplus, bankruptcy auctions and other unsold items. Some of them have been stored longer, some of them are newer. All kind of designs, and several qualities (garments, bags, decorative fabrics, clothing fabrics, linens etc.). There are lot of suit-fabrics in gray and stripes. Material compositions vary from polyester to viscose, cotton and even some wool blends and everything between. All fabrics are clean and well stored. If interested, we would have a 40ft container of this kind of mixed lot from Finland. Also 20ft container possible. We are located in Lahti, Finland. Price is very affordable: 1.4 euros/kg EXW in Lahti, FINLAND. Aproximately 9-10tons of material. We can send you photos if interested or you can ask me more joona.alestalo@alestalo.fi
Composition: Mainly viscose 20% or more, remaining is polyester. Absorbent. . Width: 30 mm - 90 mm Weight: average 35 - 55 gr/m2 Color: White Packing: Rolls on wooden pallets, wrapped in plastics Loading: 8,5 tons in one 40HC Container or 9 tons in a truckload Origin: EU Price: 0,71USD/kg FOB port of Gdynia or Gdansk Payment: 100% prepayment (first container) after delivery, documents through bank. These are excellent for synthetic mops. Quality is good. More details can be send if requested.
Composition: Mainly viscose/polyester, some few rolls have proportion ofpp/bico. Highly absorbent. . Width: 60 mm - 500mm Weight: average 35 - 50 gr/m2Color: White Packing: Rolls on wooden pallets, no proper wrapping Loading: 8,5 tons in one 40HC Container Origin: EU Price: 0,89 eur/kg (CIF any port in South-Korea/Vietnam/Bangkok/Philippines/Indonesia) Payment: 100% prepayment (first container) after delivery, documents through bank. These are excellent for mops and dry wipes or cleaning cloths. Quality is good. More details can be send if requested.
R-Steel® Wire Loops and Boxes manufactured by R-Group Finland Oy are steel parts consisting of a high strength steel wire and a steel box. R-Steel® Wire Loop boxes are very easy to use on site, with proven no tool tear off tape that releases the flexible loops. Our wire loop box range includes: Single wire loop boxes and Double wire loop boxes. Highly effe�cient product available for both precast and cast in situ structure. It is mainly used in the connection of slabs, walls and columns. Quality control of the wire rope loops is done according to the requirements of the Finnish Code of Building Regulations and the instructions according to the quality and environment system of the R-Group Finland Oy (ISO9001 and ISO 14001). R-Group Finland Oy has a quality control contract with Inspecta Sertifiointi Oy. The steel box and the wire rope are zinc coated. Zinced products are passivized with min. 1 month of storage. R-Steel Loop is a flexible wire rope is bent to loop and held together by compression sleeve. R-Steel® Loop may be used e.g. to tie concrete wall elements to the building frame with ribbed steel bars installed through the wire rope loop. The wire boxes have the advantage of ease of casting and protection of the loop, however the R-Steel® loops can be used in thinner panels and can also be used for lifting. Single Wire Loop Boxes For Single Boxes available standard wire lengths of 60 mm, 80 mm, 100 mm, 120 mm and 140 mm. Double Wire Loop Boxes Double Wire Loop Box offers unique solution for joining double walls to precast elements. Design resistances can be achieved in all directions. Wire lenghts of 80 mm and 100 mm are available for double wire loop. Thickness of the steel plate of the box is 0,7 mm, according to SFS-EN 12385.
THE HALO (Pastel Pink) KING - AFTHK014 QUEEN - AFTHQ029 Description: The Halo, also known as (sundog) (a parhelion), is an atmospheric optical phenomenon that consists of a bright spot on one or both sides of the Sun. The refraction of sunlight causes Halo by ice crystals in the atmosphere. These events occur only in particular conditions when the moon is full or nearly full, and ice crystals form in the atmosphere. Beautiful Halo can be seen anywhere in Finland. The Halo flowers are charming, attractive, and perfect gifts for all seasons and occasions. Coloured (PASTEL PINK) Dried Tupasvilla ( Eriophorum Vaginatum) with two sets, The Halo King and Queen. Dimensions: The Halo King Height: 35 - 50 cm 9 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers The Halo Queen Height: 20 - 30 cm 7 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers General: Long Lasting 3YR+ Organic Eco - Friendly No Maintenance Needed Product of Finland Proper Care: Do not water Do not pull flower bristles Handle with Care Keep in dry place Photos/Videos: Dried Flowers are natural and may differ in sizes, shapes and colors. The color rendering may vary from one screen to another. Offer: Wholesale
R-steel, offers a comprehensive range of high quality lifting systems designed for safe lifting and transportation of various types of precast elements. Your selection may be based upon technical or economic requirement or due to already owned/available lifting equipment. R-steel, threaded lifting systems system consists of threaded anchors their lifting devices and other accessories. * salient features - load capacities ranging from 0.5 to 12.5 tons. - used for lifting all kind of precast elements. - used for lifting angle from 0 to 90 degrees. - easy to install and can also be recessed if required. - ce marking. * products: - r-lifting anchor - are threaded socket with headed stud for anchorage. - rls crosshole anchors - are threaded socket with hole for ribbed steel bar for anchorage. - rpas plate anchor - are steel tube with inner thread welded to a flat steel plate for anchorage. - rta, rwtl and rwts anchors - are threaded socket with straight/ wavy ribbed bar for anchorage. - wire loop lifting device - used for lifting angle between 0, , and 45, , . - wire loop lifting device equipped with pressure plate - used for lifting angle between 0, , and 90. - full metallic lifting device equipped with pressure plate for lifting angle between 0, , and 90. - nailing plates, socket magnets and plastic caps are also available. - custom made solutions are also available