Manufacturer pompetravaini italy, made in year 2002. Vacuum pump is two staged rotating pump with externally located, grease lubricated bearings. Pump is liquid ring type designed for water sealed operation. The impeller and shaft are made of stainless steel (aisi 316), cast iron casing and manifold normal steel. The shaft is sealed with double mechanical seal. Pump is provided with connections for service water and draining. Pump includes also anticavitation valve. Pump is dismantled from its base frame but the delivery includes original electric motor eex classified abb hyr 200m lb 4 30 kw, 1476 rpm, year 1995. The equipment will be supplied loose - not as a skid. Technical data:trch 80 - 540/c2/ra Max suction pressure:25 mbar (till 300mbar) Max capacity:540 m3/h (min 400 m3/h) Flanges:80 mm Rotation speed:1500 rpm Power requirement:30 kw at 1500 rpm Year made:2002 Condition:fully operational
The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit. Operation principle: Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency. Technical data: Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden Type: ECO 5000 VS-HP, R407C Year made: 2003 Evaporation capacity: 5000 liters / 24 hour (pure water) Electricity consump.: about 0,15 kWh / liter pure wateri) Control unit: Siemens Micromaster 420 Compressor: Bitzer Kuhlmachinenbau GmbH, Compressor type: 6G-40,2 Compressor capacity: 126.8 m3/h, 19/28 bar Refrigenerant: R 407 C Main dimensions: 2.8 m x 1.3 m x 2.9 m Weight: 1500 kg.
The main description of the plant equipmet is: 1. Brew House Make & Capacity: Steinecker1995 -1999 5 brews/d, 450-500 hl/brew. for 7000 kg malt, 3850 Raw grain Cast-out quantity: 500 hl, 16,5° Plato 8 Brews/ 24 hours, annual capacity 0.85 Mhl Controls are based on Siemens S5 and S7 PCS with, Botec Control system, PC Windows 2000 (Steinecker) Laboratory yield = 97.1% (2.1.09 – 28.5.09, 837 brews) The Brewhouse was installed in 1996 - 1999 by Steinecker to a high standard of control and automation and it contains the following main equipment: Wet Conditioning Mill, capacity 20 tons/hour and it is fully overhauled 2008 Configuration, main characteristics: 1 wet mill plant: 20 t/h 1 mash tun kettle plant: V=550 hl 1 lauter tun plant: D=7200mm 1 weak wort tank: V=155 hl 1 pre run vessel: V=640 hl 1 CIP- water distributor brew/whirpool kettle hot wort max. 520 hl (1 brew / 5 hours) wort cooling 400 hl/h, 10°C - Mash Kettle, a jacketed vessel 550 hl - Enzyme Dosing pot and pump - Lauter Tun complete with spent grain tank and Pondorff pneumatic grains transfer. Tun capacity 814 Hl and diameter 7200 mm, Solids capacity of 7000 kg malt and 3850 kg raw grain. Complete with internal rakes and scrapers - Pre Run Vessel complete with internal heater , volume 640 hl - Wort Boiler/ Whirlpool, gross volume 757 hl net 520 hl - Wort Cooler with aeration – GEA supplied plate heat exchanger (YOM 1990) – rated at 450 Hl/hr cooling the wort from 95oC down to less than 10oC. Cooling achieved with brewing water and then chilled water. Aeration achieved by use of a sintered disc and static mixers, and controlled manually using mass flow meters - 2 Hop Pellet Tanks - 2 Hop Oil Tanks - Brewhouse Weak Wort Tank, volume 150 hl - Alfa-Laval Decanter, year 2008, capacity 100 hl / h - 2 Weak Wort Tanks, volume approx 80 hl each - Gypsum Tank, volume approx 40 hl - Wet starch tank – volume 100 hl - Spent Grains Silo - Spent Grains Drying System - Bulk Acid tank – plastic tank with integral bund and dosing pumps
The equipment is designed and manufactured by Gough & Co Ldt, UK in year 1999 / installed in 2000, manufacturer’s type single deck Vibracon GVF4. We have totally 3 identical units which were dismantled in 2007 and all of them are in very good operational condition. These are single deck circular screen design for high velocity scalping, de-watering or single deck separation in chemical and pharmaceutical industry. (These units were screening oversized particles in PVC - granulate factory truck loading station) The perforated screen and all product touching parts are made on stainless steel AISI 304L. Top deck houses the screen and the discharge spout for oversize particle removal is fitted to it. Top deck is supported with mechanical spring and vibration movement is created by two contra rotating vibrating motors on the outside of the unit so there are no internal working parts. Vibration power can be adjusted. Technical data: Type: Vibracon GVF 4 Material: AISI 304L – product touching parts Perforated screen: Mesh size 4 mm Screen diameter: 1100 mm Screen area: 9500 cm2 Vibrators: 2 x 0.52 kW units.
This Powerpak 660 horizontal thermoforming machine (form/fill/seal) is manufactured by German Tiromat Krämer+Grebe GmbH & Co in 1998. It is designed for high capacity packing of various products in food and pharmaceutical industry. This unit has been packing bread in to vacuum pack and it is equipped with a three head hot foil printer, 2- gas mixing device for CO2 injection, separate vacuum pump, cross- and longitudinal cutters and water cooled upper cover of the forming unit. Construction material is food quality stainless steel and equipment is controlled with PC-programmable Tiromat Control Unit. This unit has very little operation hours - estimated total 3000 hours - and therefore it is in excellent condition. Operating and service manuals in English, Finnish and German and machine comes with the CE-certificate. Machine type:Powerpak 660 Machine number:665/0211 Manufacturing year:1998 Foil type:Flexible Formatting width:430 mm Film type used:PS-PE 450/50 Max formatting depth:40 mm Forming dies:223-3,1 Capacity:10 phases / min Control unit:Tiromat Ho foil printer:SC-700 with 3 printing units Overall length:7.30 meters Overall width:1.15 meters Height:1.85 meters Nominal power need:50 A / 380 V / 50 Hz.
Plasmatreat FG1002 pre-treatment and cleaning unit This flat surface pre-treatment and cleaning unit with open air / atmospheric-pressure plasma technology was originally made by Plasmatreat company in 2004, manufacturer's model FG1002 with Siemens PLC control system and then in year 2008 it was refurbished with new plasma nozzle directing robot and an aluminium profile structured operation table. The unit has two plasma nozzles and it has been used on occasionally and is in excellent condition. The equipment has CE marking and proper documentation, including wirering diagrams This machine is designed to pre-treat and clean any metal, aluminum, plastics (such as PP and EPDM) or glass surface free from grease, dust and other unwanted materials and to pre-treat material surface for ensuring the adhesion of surface coating to these materials. Plasmatreat process also allows to use environmentally friendly water-based painting for coating and due to the fact that cleaning with plasma is a dry process immediate further processing of the materials is possible. For more information, please visit manufacturer's web page www.plasmatreat.de Technical information: Manufacturer:Plasmatreat Company Model:Plasmatreat Openair® FG 1002 Serial number:695 Year of manufacturing:2004 / 2008 Operation table size:1600 x 3000 mm Electricity connection:3~/ 400V / 32 A Condition:Used, excellent.
Product features: Dimension: Living area: 154,5 m2 Gross floor area: 181 m2 Material: The material used for the logs is Lapland's red-hearted pine. Laplands red-hearted pine has grown slowly into tight-grained wood in northern Finland; experts value this pine worthy of hardwood. Over the years, the red-hearted pine does not weather like pine that has grown quickly in lush areas, but reddens beautifully, as its name suggests. The slow growth rate and the large proportion of heartwood cause this effect. Even in extreme conditions, red-hearted pine cracks considerably less than an ordinary log. Moreover, the sagging of timber, which happens in log cabins over the years, is of minor effect in red-hearted pine compared to an ordinary log. That is why it is a unique and a truly lasting building material. Log dimensions: For all the log houses that Pellopuu produces there can be chosen for the following dimensions (width/height): ò 88x170mm ò 114x170mm ò 136x170mm ò 202x220mm ò 240x220mm All the log packages are packaged in water tight paper
Product features: Dimension: Living area: 142,5 m2 Gross floor area: 163,5 m2 Material: The material used for the logs is Lapland's red-hearted pine. Laplands red-hearted pine has grown slowly into tight-grained wood in northern Finland; experts value this pine worthy of hardwood. Over the years, the red-hearted pine does not weather like pine that has grown quickly in lush areas, but reddens beautifully, as its name suggests. The slow growth rate and the large proportion of heartwood cause this effect. Even in extreme conditions, red-hearted pine cracks considerably less than an ordinary log. Moreover, the sagging of timber, which happens in log cabins over the years, is of minor effect in red-hearted pine compared to an ordinary log. That is why it is a unique and a truly lasting building material. Log dimensions: For all the log houses that Pellopuu produces there can be chosen for the following dimensions (width/height): ò 88x170mm ò 114x170mm ò 136x170mm ò 202x220mm ò 240x220mm All the log packages are packaged in water tight paper
Product features: Dimension: Living area: 174,5 m2 Gross floor area: 202 m2 Material: The material used for the logs is Lapland's red-hearted pine. Laplands red-hearted pine has grown slowly into tight-grained Product features: wood in northern Finland; experts value this pine worthy of hardwood. Over the years, the red-hearted pine does not weather like pine that has grown quickly in lush areas, but reddens beautifully, as its name suggests. The slow growth rate and the large proportion of heartwood cause this effect. Even in extreme conditions, red-hearted pine cracks considerably less than an ordinary log. Moreover, the sagging of timber, which happens in log cabins over the years, is of minor effect in red-hearted pine compared to an ordinary log. That is why it is a unique and a truly lasting building material. Log dimensions: For all the log houses that Pellopuu produces there can be chosen for the following dimensions (width/height): ò 88x170mm ò 114x170mm ò 136x170mm ò 202x220mm ò 240x220mm all the log packages are packaged in water tight paper
Compressor single stage, standard speed oil-injected rotary screw compressor with manufactured by German company Drucklufttechnik GmbH in year 2002. The complete unit consists of intermediate pressure vessel and Ultratroc - air dryer all delivered same time as the compressor. The unit is controlled by modern DELCOS 3000 control unit. The total unit has 30320 operating hours, the unit has been regularly serviced by a compressor service company and is in good operational condition. The compressor is single-stage, double screw, V-belt driven electric motor drive compressor which has oil cooler and thermostat controlled water - air after cooler on discharge of the pressurized air. The operations were stopped in year 2006 but the compressor and other equipment are still installed and ready for test run. Technical data: Compressor type:CompAir L90 7,5A Capacity:16.1 m3/min, 7.5 bar Comp. electric motor:90 kW - 400/415 V û 50 Hz Air cooler electric motor:3.0 kW - 400/415 V û 50 Hz Compressor weight:2380 kg Compressor dimensions:2.4 x 1.4 x 2.0 m (W x L x H) Air dryer type:Ultratroc SD 1350 û type 422 Air dryer air volume:22.5 m3/min Total power requirement of dryer:2.4 kW DryerÆs refrigerant:Type R134 a û filling 3.5 kg DryerÆs dimensions:1200x900x800 mm, weight 185 kg Int. mediate air pressure vessel:Volume 2 m3, 10 bar, made by Galvanoimis Oy.
New high purity copper material has superior low temperature property exceeding rrr (residual resistivity ratio) 3000, and has been adopted for special applications, for example, components for cryogenic refrigerator and materials for r&d in the field of space technology. the cable for high end audio cables has a controlled crystal structure and minimizes transmission loss. we manufacture products such as spreader, wire rope, blocks and various shapes, all easily needed. feel free to contact us..
Mineral spring water, mineral water, spring water.
General Products.
Mineral water.
Supplier of shea butter, palm oil, ghanaian chilli sauce (shitor), orange juice concentrates and many other african foods and beverages.
Rose Water..
Butter.
THE MIDNIGHT SUN (Pastel Yellow) KING - AFTMSK015 QUEEN - AFTMSQ030 Description: The Midnight Sun is inspired by Finnish nature, an iconic natural phenomenon in Finland. Many wonder how Finns survive with less sunlight in winter, and spirit replies with 24 hours of daylight in summer. Midnight Sun from May to August creates the perfect season for Arctic exploration and summer fun during the night less night. The Midnight Sun flowers are joyful, soothing and perfect gifts for all seasons and occasions. Coloured (PASTEL YELLOW) Dried Tupasvilla ( Eriophorum Vaginatum) with two sets, The Midnight Sun King and Queen. Dimensions: The Midnight Sun King Height: 35 - 50 cm 9 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers The Midnight Sun Queen Height: 20 - 30 cm 7 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers General: Long Lasting 3YR+ Organic Eco - Friendly No Maintenance Needed Product of Finland Proper Care: Do not water Do not pull flower bristles Handle with Care Keep in dry place Photos/Videos: Dried Flowers are natural and may differ in sizes, shapes and colors. The color rendering may vary from one screen to another. Offer: Wholesale
BLUE SKY (Pastel Blue) KING - AFBSK013 QUEEN - AFBSQ028 Description: When Finns speak of blue sky, they are not talking about sadness. Instead, the blue sky is a brief period at the beginning and end of winter midday, when the colour of polar night, a crystal clear sky and deep snow cover come together for a breathtaking and utterly captivating experience. Blue Sky flowers are lovely, relaxing, and perfect gifts for all seasons and occasions. Coloured (PASTEL BLUE) Dried Tupasvilla ( Eriophorum Vaginatum) with two sets, Blue Sky King and Queen. Dimensions: Blue Sky King Height: 35 - 50 cm 9 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers Blue Sky Queen Height: 20 - 30 cm 7 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers General: Long Lasting 3YR+ Organic Eco - Friendly No Maintenance Needed Product of Finland Proper Care: Do not water Do not pull flower bristles Handle with Care Keep in dry place Photos/Videos: Dried Flowers are natural and may differ in sizes, shapes and colors. The color rendering may vary from one screen to another. Offer: Wholesale
THE HALO (Pastel Pink) KING - AFTHK014 QUEEN - AFTHQ029 Description: The Halo, also known as (sundog) (a parhelion), is an atmospheric optical phenomenon that consists of a bright spot on one or both sides of the Sun. The refraction of sunlight causes Halo by ice crystals in the atmosphere. These events occur only in particular conditions when the moon is full or nearly full, and ice crystals form in the atmosphere. Beautiful Halo can be seen anywhere in Finland. The Halo flowers are charming, attractive, and perfect gifts for all seasons and occasions. Coloured (PASTEL PINK) Dried Tupasvilla ( Eriophorum Vaginatum) with two sets, The Halo King and Queen. Dimensions: The Halo King Height: 35 - 50 cm 9 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers The Halo Queen Height: 20 - 30 cm 7 flowers per bouquet Number of flowers per bouquet vary on the size of the flowers General: Long Lasting 3YR+ Organic Eco - Friendly No Maintenance Needed Product of Finland Proper Care: Do not water Do not pull flower bristles Handle with Care Keep in dry place Photos/Videos: Dried Flowers are natural and may differ in sizes, shapes and colors. The color rendering may vary from one screen to another. Offer: Wholesale