Scrap Metal Like Stainless Steel Scrap..
Material: Stainless Steel Grade: 201 Length: 1500 or 1200 or 1000 mm Width: 500 mm Thickness: customize Number of Bowls: 1 Position: Centre Rear OR customize(right rear or left rear) color : silver Made in Egypt.
Stainless Steel Tank 304 < 316
Gas equipments like safety valve, tubes.
Pure rubber granules of size 1-3 mm with no steel or textile. This product is used in many applications mainly as artificial turf infill and anti-shock floorings.
Pure Fine powder of various sizes below 1 mm free of steel, textile and any impurities. This product is used in many applications such as rubberized asphalt, speed bumps, rubber car stopper and as a raw material for reclaimed rubber production. Different sizes can be produced as per clients specifications.
TDF: Shredded tyres of size 5cm*5cm for the use as an alternative fuel in cement kilns. Fine TDF: Tyre chips of size 2cm * 2cm and below with vast majority of steel removed. This product is an extremely high quality alternative fuel with very high calorific value.
In AMTC we are engaged in processing, supplying, and exporting of Calcined Kaolin namely for porcelain industry, sanitary ceramics, ceramic tiles, refractories, iron & steel, chemistry and further applications. As a leading Supplier and Exporter of Chamotte (China Clay), We ensure that our clay and Minerals are made as per the international standard and norms. Packed in high quality packaging materials, our Kaolin is offered at very cost effective prices, without compromising outstanding quality and purity.
The Calcined Dolomite Powder is a result of Calcinations of Natural Dolomite Lumps. After burning, calcium oxide contains becomes 50% to 55% and Magnesium Contains 30% to 38%. Therefore, we have given it name of Dolo Lime, Calcined Dolomite or Burnt Dolomite. Calcined Dolomite Lumps have normally been formed by the replacement of some of the calcium in limestone with magnesia, a process known as dolomitisation. Theoretically, dolomitic lime should be a stoichiometric mixture of CaO and MgO, i.e. 58% CaO and 42% MgO. In practice, because of impurities and differing levels of dolomitisation, commercial products normally contain 35-40 % MgO. Calcined Dolomite Lumps are the best catalysts and base chemical for steel plants. Chemical Name : Calcium Magnesium Oxide Chemical Formula : MgO.CaO Major Applications : Iron and steel industry Non-ferrous metals Ore concentration Alumina & bauxite Gas treatment Hazardous waste treatment Animal waste treatment Packing : 50 kg bags/1000 kgs bags
Modern life would be impossible without minerals. They are used in the production of everything from paint to cosmetics, water treatment to sound proofing, concrete to ceramics. AMTC supplies minerals for every conceivable application. In AMTC we are engaged in processing of Calcined Kaolin namely for porcelain industry, sanitary ceramics, ceramic tiles, refractories, iron & steel, chemistry and further applications. Calcined Kaolin is an anhydrous aluminium silicate produced by heating ultrafine natural kaolin to high temperatures in a kiln. The calcination process increases whiteness and hardness, improves electrical properties, and alters the size and shape of the kaolin particles. After Kiln
We are producing Calcined Lime Lumps from the popular high-grade limestone of Egypt.Calcined Lime Lumps, offered by us, are obtained by calcination of (controlled heating-time and temperature) limestone at temperatures above 900C. The CaO% ranges from 80%-95% up to client request and the industry. Chemical Name : Calcium Oxide Chemical Formula : CaO Major Applications : -Steel industry -Sugar industry -Paper industry -Aluminium refineries -Water treatment plants -Lather and Textile industry -Paint industry -ETP plants -Fly Ash bricks -Construction industry Packaging : 50 kg bags/1000 kgs bags Calcined Lime Lumps Are Available In Different Sizes And Forms : Mesh Size : 100/325 Lumps size : 15mm to 35 mm
High Adsorption Steam Anthracite Coal Filter Media Low Ash Anthracite Coal / Carbon Additive For Industry Sewage Water Key attributes Industry-specific attributes C Content (%) : 80-95% S Content (%) : 3 N Content (%) ; 0 H Content (%) : 0 Ash Content (%) : 4% Other attributes Place of Origin : China / India Brand Name ; Cairo Minerals 27-6-2020 Model Number : Anthracite CM Application : Anthracite Coal, steel making,water treatment Shape : Lump, black granular Dimensions : 0 Product Type : Anthracite Working Temperature : 0 Volatile :
Hydrated lime (calcium hydroxide) is a dry, colorless crystalline powder manufactured by treating calcium oxide (quicklime) with water, in a process called "slaking." Also known as slack lime, builders lime or pickling lime, hydrated lime is used in the production of mortars, plasters, cements, paints, hard rubber products, petrochemicals, and in the tanning of leather. A more recent development for hydrated lime use is in environmental applications. Here, hydrated lime, a mild alkali, is used for the removal of acid gases in coal-fired energy plants, cement mills, glassmakers and incinerators. However, the largest single use of hydrated lime remains steel manufacturing, where it is used to remove impurities. Hydrated lime is also used to produce other metals. In construction, the dominant use of hydrated lime is in soil stabilization for roads, earthen dams, airfields, and building foundations. Hydrated lime can be used to raise the pH of acidic soils. This is also referred to as soil "sweetening." the purity of our raw material is not less than 80%.
Erw Steel Pipes Black And Galvanized..
Steel Pipes and Fittings.
Egypt is one of the best places which you can find the Highest and purist Quality Silica-sand, CairoMinerals offer Quality Products with Competitive Prices since 2004 but we are not only in the market, you can find many companies in Egypt as well deal with white silica-sand What is silica sand ? Silica (SiO2) sand is generally the sand which you can get all over a beach and it also happens to be the most commonly used sand. It is most commonly composed by either crushing sandstone or else it is most commonly taken from natural occurring points or locations, such as beaches and river beds. The fusion point of purest form of silica is 1,760 �°C (3,200 �°F), however the sands which is used for extraction of silica exhibits a lower melting point due to impurities. For casting which requires high melting point, such as steels, at least 98% pure should be used; however for metals having lower melting points, like cast iron and non-ferrous metals, the sand have low purity can be used (between 94 and 98% pure). Silica-sand happens to be the most commonly used sand because it is found in abundance, and thus it costs low (therein being its greatest advantage). However there are some disadvantages of sand as well. The disadvantages of silica are high thermal expansion, which can result in casting defects in metals having high melting point, and low thermal conductivity, which can very easily result in defective casting. Apart from there that, there comes some more barriers with it. It also cannot be used in sync with some of the basic metals because it will chemically react with the metal, resulting in surface defects. Finally, it releases silica particles during the pour, risking silicosis in foundry workers. Silica Sand for Sale Commercial Silica-Sand is most commonly used as a means of proppant by companies which deals in oil and natural gas recovery in conventional and unconventional resource plays. The resource is also utilized in industrial processing to manufacture regular use items such as glass, construction materials, personal care materials, electronics, and even renewable materials. Industrial sand happens to be a word which normally refers to silica-sand-products having extremely high purity with closely controlled sizing. It generally happens to be a clearer product than common concrete and asphalt gravels. The name Silica (SiO2) is provided to a handful of minerals solely made up of silicon and oxygen. Mostly it is found in the crystalline state. It is also found in an amorphous form which comes as a result of weathering or plankton fossilization Silica-sand deposits are generally mined and dig out in open pit processes. Extracted ore is subjected a lot of processing to enhance the silica content by reducing impurities. After that it is dried and sized to manufacture the best sized particle size distribution for the intended application.
Boilers & boiler parts, pressure vessels, piping & piping systems, steel structure, api tanks, handling systems, condensers, economizers, heat ex-changers, pipes, fitting, valves, plates, and caps.Manufacture
Wooden & metal furniture (all furniture customized), chemicals products: hydrochloric acid (hcl), sulphuric acid, calcium chloride, nitric acid 50% & 63% kitchen tools: stainless, aluminum & brass bowls and trays.Exporter
Stainless Steel Scrap.
Stainless steel scrap 304, 316, 201, 410.