Soda ash, also known as sodium carbonate (Na2CO3), is an alkali chemical refined from the mineral trona or naturally occurring sodium carbonate-bearing brines (both referred to as natural soda ash), the mineral nahcolite (referred to as natural sodium bicarbonate, from which soda ash can be produced), or manufactured from one of several chemical processes (referred to as synthetic soda ash).
Nitric Acid is a strong acid with chemical formula HNO3. It is also known as the spirit of niter and aqua fortis. In its pure form, it is colourless but as it gets older it turns into a yellow cast. This colour appears due to the decomposition of Nitric acid to oxides of nitrogen and water. It is highly corrosive and toxic. It causes severe skin burn. It reacts with hydroxides, metals, and oxides to form nitrate salts.
cement, in general, adhesive substances of all kinds, but, in a narrower sense, the binding materials used in building and civil engineering construction. Cements of this kind are finely ground powders that, when mixed with water, set to a hard mass. Setting and hardening result from hydration, which is a chemical combination of the cement compounds with water that yields submicroscopic crystals or a gel-like material with a high surface area. Because of their hydrating properties, constructional cements, which will even set and harden under water, are often called hydraulic cements. The most important of these is portland cement.
Clinker is a nodular material produced in the kilning stage during the production of cement and is used as the binder in many cement products. The lumps or nodules of clinker are usually of diameter 3-25 mm and dark grey in color. It is produced by heating limestone and clay to the point of liquefaction at about 1400 C-1500 C in the rotary kiln. Clinker, when added with gypsum (to control the setting properties of cement and ensure compressive strength) and ground finely, produces cement. Clinker can be stored for long periods of time in a dry condition without degradation of quality, hence it is traded internationally and used by cement manufacturers when raw materials are found to be scarce or unavailable.
Coal is the largest and most widespread fuel resource providing 23 per cent of the worlda s energy. However widespread concern about environmental emissions from coal has started to limit the growth in use of this important energy source. While metallurgical coal and thermal coal have similar geologic origins, their commercial markets and industrial uses are vastly different. Thermal coal or steaming coal is burned for steam to run turbines to generate electricity either to public electricity grids or directly by industry consuming electrical power (such as chemical industries, paper manufacturers, cement industry and brickworks). During power generation the coal is ground to a powder and fired into a boiler to produce steam to drive turbines to produce electricity.
Petroleum By Products is a byproduct created when bitumen found in tar sands, like those is refined into crude oil. Bitumen contains a higher number of carbon atoms than regular oil and its these atoms, extracted from large hydrocarbon molecules using heat, that go on to form Petroleum By Products. High grade Petroleum By Products which is low in sulphur and heavy metals can be used to make electrodes for the steel and aluminum industry. But the majority of Petroleum By Products manufactured globally, approximately 75-80%, is of a much lower grade, containing higher levels of sulphur and heavy metals and is used solely as fuel. The majority of Petroleum By Products produced in the the world s largest consumer of coal to feed its many coal-fired power stations.
Diammonium phosphate (DAP) is the worlds most widely used phosphorus fertilizer. It s made from two common constituents in the fertilizer industry, and its relatively high nutrient content and excellent physical properties make it a popular choice in farming and other industries.
32.5, 42.5, 52.5 N&R - Clinker Origins: Egypt, Saudi, Turkey, and Europe Only bulk shipping
Urea, NPK, DAP, MOP, SOP Origin: Egypt, Saudi, Oman, CIS Bulk and containerized shipping
Soda Ash, Boric Acid, Phosphoric Acid, Sulphuric Acid, Ammonia Origin: Egypt, Turkey, CIS, UAE, and Oman Bulk and containerized shipping
White & Brown Sugar Origin: Brazil, Indonesia, UAE, and Egypt Bulk and containerized shipping
Origin: South Africa, Tanzania, KSA, and USA Only bulk Shipping
Chemicals Names Acetic Acid Acetone Adipic Acid AGS Acid (Dicarboxylic Acid Mixture) Aluminium Hydroxide Aluminiumoxide Ammonia Aniline Oil Antimicrobial additive (Ionpure) Antimony Pentoxide Colloidal Antimony Trioxide Concentrate Antimony Trioxide Masterbatches Antimony Trioxide Powder Benzene 1,2,3 Benzotriazole Bisphenol-A BPA Butyl Acetate 98/100 % Butyl Acrylate Butylated Hydroxytoluene Butyldiglycol Butylglycol Caprolactam Caustic Potash KOH Caustic Soda Flakes/Pearls Caustic Soda Liquid CSL Chrome Sulphate Solution, basic Colloidal Silica (Ludox) Copper Sulphate Cresole Cyclohexane Cyclohexanone Dibutyl Phthalate Dicyandiamide Diethanolamine DEA Diethylene Glycol DEG Diisobutyl Phthalate Diisononyl Phthalate Dimethylacetamide Dimethylformamide Dimethylterephthalate DMT Dioctylphthalate DOP Dipropylene Glycol DPG Ethanole Ethylacetate 98/100 % Ethylbenzene Ethylene Dichloride EDC 2-Ethylhexanol 2-EH Expandable Polystyrene EPS Flame Retardents Flame Retardents Masterbatche -halogen free Flocculants / Antifoam Agents Formaldehyde Formic Acid Fumed Silica ORISIL Glass Fibres Glycerine Glycolic Acid Hexamethylene Tetramine (Hexamine) High Density Polyethylene HD-PE Hydrochloric Acid Isobutanol IBA Isopropyl Alcohol Linear Alkyl Benzene LAB Linear Low Density Polyethylene LLD-PE Lithium Compounds Lithiumhydroxide LiOH Low Density Polyethylene LD-PE MDI Melamine Methanol pure 99,85 % Methanol techn. grade Methyl Methacrylate Monomer Mold Release Agents Monoethanolamine MEA Monoethylene Glycol MEG Monopropylene Glicol Mullite N-Butanol NBA Nigrosine Nonylphenol Ethoxylates NPE N-Paraffin Oilfield and Refinery Chemicals Oxalic Acid Diethylester DEO Para-Tertiary-Butylphenol PTBP Para-Toluene Sulphonic Acid Pentaerythritol Petroleum Jelly Phenol Phosphoric Acid Phthalic Acid Anhydride PA Polyethylene Glycol Polyethylene Terephthalat PET Polymethylmetacrylate PMMA Polyol Polypropylene PP Polystyrene PS Potassium Peroxomonosulphate (Oxone) Process Aid Agents Propylene (Polymer- Chemical- Refinery Grade) Purified Isophthalic Acid Purified Terephthalic Acid PVC PVC Thermostabilizers Sebacic Acid Silicone Oil Soda Ash Sodium Bicarbonate Sodium Hydrogen Sulphide Solution Sodium Hydrosulphite SHS Sodium Sulphate Sodium Sulphide Solution Sodium Tripolyphosphate Stannous Octoate Stearates (Ca, Zn, Ba, Al) Styrene Monomer Sulfamic Acid TDI 80(20) Tertiary Amyl Alcohol Tetrahydrofurane THF Titanium Dioxide TiO2 Toluene Tolyltriazole Triethylene Diamine TEDA Triethylene Glycol TEG Trimellitic Anhydride TMA Trimethylol Propane TMP Urea techn. Vinyl Acetate Monomer VAM Vinyl Chloride Monomer VCM Wax (Precision Investment Casting) Xylene (Solvent- Virgin Grade) Zirconium Products
The Egyptian Onion, these onions come in yellow or red varieties. They are available between March and September and have thin, light colored skin. They are sweet and mild because of their high water content. Fresh Egyptian onions have a delicate flavor. Health Facts: Red onions provide significant amounts of vitamin C and vitamin B6. They are also one of the best food sources of chromium. They are very low in calories and contain zero fat. Fresh Onions Packaging specifications Varieties Golden and Red onions Season Red From April to SeptemberYellow / golden January to JuneWhite January to May HS Cod 070310 Size : 40/60 mm, 60/80 mm, 80/100 mm, 50/70 mm, 70/90mmor as our customers’ requirements Packing 10 kg, 25 kg Mesh Bags.Container Capacity 40 feet HQ.Tons per container: 26 Tons. Pallets per container: 20 Pallets.Bags per container: 1040 Bags/25 KG 2600 Bags/10 KG. Bags per pallet: 52 Bags/25 kg, 130 Bags/10 Kg Pallet net Weight: 1300 KGCustom packing upon customer’s request. Delivery terms 4 days after receiving the advance.
Hydrated aluminum sulfate-18 hydrate We are offering aluminum sulfate hydrated (used for water treatment and clarifications/ sanitary sewer systems/ dying and printing textiles and fabrics/ paper making/ phosphorus removal/ cbi/ charge neutralization/ toc reaction). Moreover, we are also offering flexible and attractive delivery prices (cfr, cif and door to door prices). Specifications: Chemical formula: al2(so4)3. 18 h2o Appearance: white to light tan solid pieces Aluminum oxide (al2o3): 15.3% at least (min) Ferric oxide (fe2o3): 0.9% max Chromium (cr): 0.001% (1000 mg/kg al max) Arsenic (as): 0.0001% (100 mg/kg al max) Nickel (ni): 0.001% (1000 mg/kg al max) Lead (pb): 0.0008% (800 mg/kg al max) Solubility: soluble in water Insoluble in water: 0.5% Packaging: 25 kg, 50 kg or jumbo pp/pe Residues of metal catalysts or reagents (classified by emea/chmp/swp/4446/2000 are absent corresponding to ph eur, bp If interested in the following product, please provide us with your specs in loi including your desired data: product, specs, packaging, inspection, expected monthly/annual volume, delivery schedule: vessel type and expected delivery mode, and payment terms.
!PURITY COUNTS! Distinguishes us 99.8% | From Egypt [Siwa And Sinai Rock & Sea Salt] we supply | Edible Table Salt | Triple Refined Free Flow Salt and Tablet Salt | Industrial Salt | Raw [DE-icing Salt] We are manufacturing and exporting a wide stock of | ROCK AND SEA SALT | Our offered salt is processed at our unit under controlled conditions to maintain both QUALITY and PURITY. In order to avoid adulteration and low quality our laboratory experts test the salt before dispatch. supply with or without silica (anti-caking agent) based on customer requirement. Results as follows: | Iodine as Potassium Iodate= 30 ppm min [as required] | Distribution channel including retail= 15ppm | Acid Insoluble Water= 0.1% max | Moisture Content= 0.1% | Chloride content (as NaCl)= 99.1% min | Calcium (as Ca)= 0.1% max | Magnesium (as Mg)= 0.05% max | Sulphates (as SO4)= 0.5% max | Total Alkalinity (as Na2Co3)= 0.04% max | Lead (as Pb)= 2 ppm max | Arsenic (as As)= 1 ppm max | Iron (as Fe)= 50 ppm max | Water Insoluble matter= 0.1% max | pH= 7.0-8.0 -Packaging in Bulk, FIBC or 10, 25, 50 Kg bags. -Order now your shipment from our factories DIRECTLY.
Sulfur is one of the most important agricultural and industrial raw materials and is considered a strategic product sulfur is an odourless, tasteless and polyvalent nonmetal which is mostly in the form of yellow crystals and is obtained from sulphide and sulphate. Sulphur occurs naturally in the environment and is the thirteenth most abundant element in the earth�¢??s crust. It can be mined in its elemental form, although this method has declined over the last decade to less than 2% of world production. Today most elemental sulphur is obtained as a co-product recovered from oil and gas production in sweetening process. Sulphur is the primary source in the production of sulphuric acid, the world�¢??s most widely used chemical. Sulphuric acid is an essential intermediate in many processes in the chemical and manufacturing industries. Sulphuric acid also is used by the fertilizer industry to manufacture primarily phosphates, nitrogen, potassium, and sulphate fertilizers. Sulfur reacts directly with methane to give carbon disulfide, used to manufacture cellophane and rayon. One of the direct uses of sulfur is in vulcanization of rubber, where polysulfide chains crosslink organic polymers. Large quantities of sulfites are used to bleach paper and to preserve dried fruit. Many surfactants and detergents (e.g. sodium lauryl sulfate) are sulfate derivatives. Calcium sulfate, gypsum, is mined on the scale of 100 million tonnes each year for use in Portland cement and fertilizers. Sulphur is increasingly used as a component of fertilizers. Sulfur can be used in agriculture and various industries such as plastics and many synthetic products, paper, paint, etc. The increasing demand from the fertilizer manufacturing sector, coupled with increasing usage of sulfur for vulcanization of rubber are the main factors driving the growth of the global sulfur industry. Moreover, owing to the fall of crude prices, refineries across the globe are engaging in capacity expansion and other brownfield activities, leading to higher demand for sulfur. The demand for sulfur is also anticipated to be driven by the increasing usage of elemental sulfur as a major ingredient in the vulcanization process implemented to manufacture rubber. However, the enactment of stringent environmental regulations restricting the usage of sulfur and the high costs associated with its mining, are the key factors hindering the sulfur market growth. The global market is segmented based on end-user applications, including agrochemicals, chemical processing, metal manufacturing, petroleum refining, and others. In 2016, the agrochemical industry occupied the largest share in terms of sulfur consumption. It is expected that the healthy growth of the phosphate fertilizer market will drive the global sulfur market over the forecast year.
PORTLAND GREY CEMENT (CEM I 42.5 N & CEM I 32.5 N) We are supplying ASTM C150/2007 Type I grey cement products (CEM I 42.5N & CEM I 32.5N). Moreover, we are also offering flexible and attractive delivery in 25 / 40 / 50 Kg Bags, Sling bags, Jumbo bags, Shrink Wrap, Bulk. Specifications (Meeting European Standard Specifications (EN 1-197 /2004) and American Standard Specifications (ASTM C150/2007 Type I): CEM I 42.5 N CEM I 32.5 N USES Used in all types of construction, which need high early compressive strength, such as bridges, tunnels, prefabricated floor, and precast concrete. Used in all concrete construction such as reinforced buildings, water tanks, roads, and any other building works, which are not subjected to sulphate effect. It also can be used in relevant industries of the construction, as hollow and solid blocks, tiles and railway line concrete supports MgO 1.2% 1.6% SO3 2.5% - 3% SO3 2.5% - 3% SO3 Chloride 0.02% - 0.04% Cl 0.02% - 0.04% Cl LOSS ON IGNITION 1% - 1.5 % 2% - 3% INSOLUBLE RESIDUE 0.30% - 0.5% 0.4% - 0.7% SURFACE AREA (BLAINE) 3200 - 3300 3100 - 3300 SOUNDNESS 0 - 1 mm 0 -1 mm COMPRESSIVE STRENGTH 2 DAYS 18 - 23 N/mm2 15 -19 N/mm2 7 DAYS 30 35 N/mm2 24 27 N/mm2 28 DAYS 44 48 N/mm2 34 38 N/mm2 INITIAL SETTING TIME 140 - 180 minutes 130 - 170 minutes -
Potassium sulphate and hydrochloric acid.
Aluminum Sulfate.
