Ii 2g ex de iic t6 gb Ii 2d ex t iiic t 60 °c db Luminaire consists of body, basic plate and Flange with protective glass. Body and flange are made of alsi alloy Treated with polyester powder paint. Luminaire can be suspended By the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is Aluminium basic plate with electro-module mounted inside the Luminaire. Electro-module consists of 20 x led cree xp-g (luminous Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000, Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing Output current of the led driver 700ma/350ma. Flange with protective Glass is screwed in the body and locked with securing screw; thread Shapes a rift of flameproof enclosure „d“. Protective hardened glass is Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection Is filled with polyurethane putty. The mobile steel hinge is fixed to The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
1.. Uveïte podrobnosti a technické specifikace 2G Ex de IIC T3-T6 Gb II 2G Ex t IIIC Tmaxsurf.-table Db Technical description: Luminaire consists of body, basic plate and flange with protective glass. Body and flange are castings from AlSi alloy. Steel hinge with eyes o 18 mm is fixed on the upper part of the body. Connecting area (increased safety „e“), with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9 – 16 mm (HSK-M-Ex for cables 10 – 16 mm for versions F), is placed on the side of the body. This area is covered with cover and sealed with silicon. Steel basic plate with electric parts and reflector is fixed in the body. Flange with protective glass is screwed into the body and secured with securing screw against unlocking; the thread creates a rift of flameproof enclosure „d“. Protective cover from hardened glass is resistant against mechanical shock min. 7 J and is fi xed in fl ange; the connection is filled with a putty (polyurethane glue). Steel mobile hinge is fixed on the flange and enables to hang up the flange under body during mounting or exchanging light source. AlSi parts of luminaire are treated with polyester powder paint; steel parts are galvanized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamps. Luminaire is designed as through-way one. When it is used as the end piece, there is necessary to replace one cable gland with blind screw V-Ex or to blind one unused gland with blind plug HSK-V-Ex (versions F: one cable gland must be replaced with blinding screw V-Ms-VMQ-Ex). Blinding parts are not attached - delivered optionally on order only. Versions K are equipped with protective guard from steel wire. All types can be equipped with lampshade (optionally on order only). Packing carton is filled with polyurethane foam Instapak luminous sources: HWL 500W E40, SPC A T CL 250W E40, HQL 250W E40, NAV-E350 350W E40 and other. NOTE ! Ballast box 205.1 can be used for HP Mercury and sodium lamps.. Carton 560 cm x 350 cm x 300cm , Weight 12 kg/pc
PP textile waste, PP and PES mixed waste, pure PP melted waste, PES fabric waste, big bags.
Rubber granules, chips, shredded, baled tires, steel wire.
Siemens plc, siemens drives, siemens motors.
Coal, steam coal, pulverized coal for injection (pci), carbon dust, petroleum by products oleum , scrap metals, wood pellets, solar panels.
Used cashmere sweaters and woollen yarns or scraps like wool waste.
Scraps, iron, soft drinks, copper wire, animals feed.Trading, shipping
Electric motors, gearboxes, frequency inverters, etc..Transport and customs clearance through verified shipping companies. technical support.
We are selling graphite powder >200 microns, clean 96-98% from recycling.
Engine Oil Shell, Mobil.
The reclaim rubber is manufactured using a de-vulcanization process, which recycles rubber from spare parts and scrap rubber items like auto tires, which work as basic material in the process. was shown to be a reliable and affordable alternative to synthetic and natural rubber.
Leather scrap.
cathode copper 99.99% with good quality Copper Cathode Grade A Purity: purity 99.99%-99.97% min Weight per Sheet:125kg copper cathode Grade A Cu 99.99 % 1.Weight of each sheet: 125kgs (+/- 1%) 2.Net weight of each pallet: 2mts (+/- 1%) 3.Min. weight in each container: 20mts approx. 4.Gross weight of each container: 22.20mts approx. Copper (Cu) min% 99.99%-99.97% min Chemical composition Item Standard Unit Cu 99.99 % As 0.0015 % Sb 0.0015 % Bi 0.0005 % Fe 0.0025 % Pb 0.002 % Sn 0.001 % Ni 0.002 % Zn 0.002 % S 0.0025 % P 0.001 % Usage: Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial .valves and fittings, Instrument sliding bearing.(EL)
