Collection ProWhite Sandal shoe, full grain leather upper, lining combination leather on back side and textil on vamp, single PU cemented sole, steel toe cap, ESD Shoe 1 pair/box or 1 pair/pe sack, 5 pairs of one size/carton
Fire-fighting rescue action top boot Fire-fighting rescue action top boot, hydrophobized leather, Antistatic construction, Cambrella lining, Nitrile rubber outsole with steel anti-perforation insert, resistant to oil, fuels, acids and temperature 300IC, Anatomic replaceable innersole washable in water 40IC, absorbing tread energy in heel, This boots are certified and approved to be used by fire-fighting rescue crews, Boot stiffened with steel toe cap. 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
Collection profire Fire-fighting rescue action top boot, hydrophobized leather, with fast-action lacing and zip with safekeeping spike special tu cap antistatic construction sympatex membrane lining nitrile rubber outsole with steel anti-perforation insert, resistant to oil, fuels, acids and temperature 300c anatomic replaceable innersole washable in water 40c, absorbing tread energy in heel. This boots are certified and approved to be used by fire-fighting rescue crews. Boot stiffened with steel toe puff. 1 pair/box or 1 pair/pe sack, 5 pairs of one size/carton
High boot - type Rigger (S1) Upper - Buffalo Booty leather & split booty combination leather upper, color tan Lining - winter FUR Sole - direct injected PU, type VIBRANT Boot with steel toe cap 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
2G Ex de IIC T4-T6 Gb II 2G Ex de IIC T4-T6 Gb II 2D Ex t IIIC T max.surf Db Luminaire consists of body, basic plate and flange with protective glass. Body and flange are made of AlSi alloy treated with polyester powder paint. Luminaire can be suspended by the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is aluminium basic plate with electro-module mounted inside the luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000, Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing output current of the LED driver 700mA/350mA. Flange with protective glass is screwed in the body and locked with securing screw; thread shapes a rift of flameproof enclosure „d“. Protective hardened glass is resistant against mech. shock min. 7 J and is fixed in the flange; the connection is filled with polyurethane putty. The mobile steel hinge is fixed to the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak. luminous sources: EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
Ii 2g ex de iic t6 gb Ii 2d ex t iiic t 60 °c db Luminaire consists of body, basic plate and Flange with protective glass. Body and flange are made of alsi alloy Treated with polyester powder paint. Luminaire can be suspended By the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is Aluminium basic plate with electro-module mounted inside the Luminaire. Electro-module consists of 20 x led cree xp-g (luminous Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000, Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing Output current of the led driver 700ma/350ma. Flange with protective Glass is screwed in the body and locked with securing screw; thread Shapes a rift of flameproof enclosure „d“. Protective hardened glass is Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection Is filled with polyurethane putty. The mobile steel hinge is fixed to The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
This VWT-FFS-4372 Double Loop tunnel construction and its technology equipment are optimized for a professional use of sportsmen, army troop as well as general public and schools. Optimization of the fan can be performed on any other scenario of the use of the tunnel (like only sport tunnel utilization, or only to tourism utilization, military and special training purposes, or eventual their combination...). Optimization means a proper selection of tunnel dimensions, fans and engines parameters for proposed purposes to gain an optimal ratio between desired performance and operational costs. Dimensions and technical parameters of this tunnel offer the best conditions for the professional requirements on speed, space and height. Its size provides ample space for the entire training even of group formations of eight skydivers. Tunnel with 4,3 m of flying chamber diameter is the perfect place for training of army parachutes and special troops with their specific equipment. From tourist's point of view, the tunnel offers comfortable space even for flying couples with instructors or other smaller groups. Thanks to a comprehensive fan optimization the, tunnel allows operation of profi-flights as well as fun-flights at very low operation costs. Materials and Dimensions Air conductors in the aboveground part of the tunnel are made of sheet steel. All steel elements are provided with corrosion protection. Tunnel skin is made by sound-insulation panels KINGSPAN. Net dimensions of the tunnel are: width 30 m depth 10 m height 32 m The typical depth of foundation of ground concrete structure is 7,5 m. The typical height of the tunnel above the ground is 24 m. Flight chamber Flight chamber consists of a glass part, which is on its top connected to a steel construction of tunnel shell. Lower part of the flight chamber is purely cylindrical with a diameter of 4,3 m and a height of 5 m. The upper part of a flight chamber is made from steel and its height is 9 m. The shape of this part of flight chamber is gradually changing from a circular diameter of 4,3 meters to circular diameter 4,3 x 4,3 m. The overall maximum height of flight chamber 14 m The height of the glass part of flight chamber 5 m Diameter of flight chamber 4,3 m Maximum speed Maximum air speed at which the tunnel can be operated continuously is 80+ m/s (300+ km/h). Motors, fans and electronic equipment The air stream is formed by four vertically stored fans, each of 3.15 m in diameter, which are powered by a 4 electro-motors, each rated at 355 kW. RPM are controlled and regulated by 4 frequency changers from ABB. Control and monitoring system of the tunnel is realized using SIEMNS technology. Cooling Tunnel cooling is provided by an active cooling unit with a maximum power consumption of 330 kW, which corresponds to a maximum cooling performance of 1 000kW. Cooling compressor unit is located outside the tunnel and two pairs of optimized coolers installed in the tunnel design ensures a comfortable temperature in the flight chamber even during very warm summer period. During cold seasons, from the certain threshold temperature, the compressor unit is automatically switched to dry coolers, which maximize utilization of outside cold air and rapidly decrease the power consumption (up to 30 kW). -------------------- Offered price represents VWT-FFS-3672 /3.6m , double loop technology ,FOB Cz Praha 20x22ft containers
Our company, a Taiwan funded enterprise, has been specialized maunufactuering screw nut machine and hardware for 20 years. Dongguan factory was founded in 1994. All the machine parts are mainly imported from Taiwan And the 17B6S detail can see in the below, 1. Technical Parameter MODEL: SW-NF 17B 6S NUT FORMER MACHINE FORGING STATION 6S 7S CUT-OF DIA (MAX) 18mm CUT-OFF LENGTHE (MAX) 30 KICK-OUTENGTH (MAX) 120 mm CENTER DISTANCE BETWEEN DIES (MM) 70 RAM STROKE (MM) 100mm FORGING POWER (TON) 1200 ton PRODUCT SIZE (INCH) 1/4 7/16 inch OUTPUT PCS/MINUTE 180 MAIN MOTOR (HP) Â 30 PUMP MOTOR (HP) 1/1 LUBRICANT (GALLON) 300 APPROX.WT (TON) 11 FLOOR AREA REQUIED (L*W*H) 3.5m* 2.15m* 1.7m 2. Application: Not only used for manufacturing Normal nuts, like Hex nut, Flanged nut, Square nut, Weld nut, Cap nut, Rivet nut, Extra thick nut, but also Motorcycle link pin, Oil plug screw, Pipe joint, Chain roller, Bearing roller, Bearing ring, Expansion anchor, Bushing sleeve, Bicycle and Motorcycle shaped spare parts, Auto spare parts, shaped nuts and various shaped pieces of shaped and non-standard items, ect, which are widely applicable in the fields of construction, metallurgy, furniture, electronics and electric appliance, automotive, aviation and other industries. 3. Main Features: No.1 The machine body and main sliding block are processed through stress relieving after being forged to prevent from deformation and ensure durable mechanical stabolity. No.2 Machine body of high alloy steel imported is prossed through quenching treatment to ensure lasting resistance to wearing. No.3 Eash cam is precisely designed with computer and made in CNC process center to ensure correct and smooth cam common normal. No.4 Applying air compressor clutch,smooth and steady start current brake,realization of inching, single stroke and continuous running, besides inching way,main sliding block will stop at the utmost point ehen the machine stops every time to provide max. operation space.
Constructions; workshop equipment; household furniture and other decorative assets made from metal (welded iron, assembled aluminum and stainless steel), wood, plywood, ldf , MDF, osb and chipboard. general-purpose welding of iron 2,5 mm to 20 mm thickness..
Basic Tactical Military Vest + Steel Body Armor Plate Basic sortiment, and trade informations: Invoice and contract for manucafturing the goods directly with manufacturer company, based in EU. Basic Tactical Military Vest + Steel Body Armor Plate. Basic Personal Defence price: Vest: 157,- EUR and 2x steel plate: 298,- EUR (front/back) manufactury capacity is 500 pieces every week. Transpot is not in calculated in the price. All prices is Ex Warehouse. Balistic protections level 4. Basic Tactical Military Vest + the corresponding quantity Steel Body Armor Plate Directly from manufacturer Delivery started +7 days from signed contract and payment of 30% from the invoice/contract value, 70% after the goods is ready manufactured ex warehouse. All document and licence for export is available. Notice: Personaly I am not a trader of this , I will connect you directly with the manufacturer, and all contract will be directly done with manufacturer company. I am here just to find and check reliable business partner. Thanks you.
Rubber granules, chips, shredded, baled tires, steel wire.
Abrasives of all kinds, hardware items, painting and measuring products.Export
We are looking for a buyer Bitumen grade 60/70 2000 MT per month. Payment by transferable DLC. FOB Price 500 USD/MT In Big Bags on Wooden Pallets and steel frame. Parameter Test Standard Specification Unit Penetration at 25 C, 100gm, 5 Sec ASTM D5 60-70 dmm Softening Point ASTM D36 Min 46 Flash Point ASTM D92 Min 232 Ductility at 25 C, 5 cm/min ASTM D113 Min 100 cm Solubility in Trichloroethylene ASTM D2042 Min 99 % Loss on heating ASTM D1754 Max 0.8 % Retained Penetration after TFOT at 25 C, 100gm, 5 Sec ASTM D5 Min 54 % Ductility at 25C, 5 cm/min after TFOT ASTM D113 Min 50 cm Specific gravity at 25 C ASTM D70 1.01 - 1.06
BUFFINGS from truck tires , 1mt big bags size 2-3cm
Different grades of SBR
BULK or CONTAINERS
We are suppliers of all types of ferrous and non-ferrous Metal(Scrap). Aluminum Ingot, Copper Scrap,Aluminum Wheel Scrap,Copper Cathode,UBC Used Can scrap,Aluminum Bars,Aluminum Extrusion 6063,Copper Ingot,HMS 1&2,cast Iron Scrap andScrap MetalScrap