Chinese Telecom Racks Suppliers and Manufacturers

CAT5E UTP 48ports patch panel, network lan cable CAT5E, network sever rack cabinet, indoor 30pair distribution box, CAT5E keystone jack FTP, fiber optic patch panel LC.

Product Name 10 Pair STB telecom distribution box terminal box Size 320*210*75 mm Packing 50 pcs/CTN . 541 CTNS/20' FCL. IP ground IP65 Suitable STB Module Color White or customized The terminal block of connection adapts for connecting the distributive wires of external and internal padding. Its construction provides the possibility of conducting the control measurements of the connected chains before both directions. Box provides protection from the environmental effects.       The terminal block of connection consists of housing and cover of rectangular form, and also 5- polar unit of connection, fixed on the housing. Cover is fixed beyond the axis common with the housing; however, it can be isolated from the housing for guaranteeing the convenience in the work due to the squeezed conditions. The introduction of wires is accomplished through the detachable stuffing boxes, which ensure the possibility of applying the wires of different sizes. Fastening wires is accomplished by the metallic screws, located inside the unit of connection. -

1.We are manufacturer 2.High reliability 3.Low VSWR 4.Multiple-band frequency ranges 5.Good quality and best service Standard exporting cartons

1.We are manufacturer 2.High reliability 3.Low VSWR 4.Multiple-band frequency ranges 5.Good quality and best service Standard exporting cartons

1.We are manufacturer 2.Competitive price 3.Low VSWR 4.Multiple-band frequency ranges 5.Good quality and best service Standard exporting cartons

1.We are manufacturer 2.Competitive price 3.Low VSWR 4.Multiple-band frequency ranges 5.Good quality and best service Standard exporting cartons

1.We are manufacturer 2.High reliability 3.Low VSWR 4.Multiple-band frequency ranges 5.Good quality and best service Standard exporting cartons

Port 30w per port 19" poe midspan injector • ieee802.3at detection • full power 250w: 30w per port • full protection otp, ocp, ovp • 1, 4, 8, 16, 24 ports optional Security cctv camera 1pcs/box

The VW321A series wireless module provides the capability of a short range, reliable wireless point-to-point, point-to-multipoint and mesh network RF data communications link. They can be used in a variety of data communications applications that require a simple to use invisible data link. The wireless modules are designed to operate in the unlicensed ISM frequency band (315MHz/433MHz/868MHz/915MHz ISM band) and are therefore acceptable for use in many countries. Features: -4 Operation modes: Transparent mode, Transparent secured mode, Addressed mode and Addressed secured mode. -Repeater supported -Integrated wireless link protocols -Deep sleep mode (Power down mode) /Wakeup Control -Server-Client mode -Broadcast Multi-drop mode -Easy configuration by AT commands. -Easy configuration with a user friendly control panel on PC. Major parameters Frequency band: 315/433/868/915MHz Interface : RS232/RS485/USB Modulation : 2-FSK Max. Tx. Power: 1W (+30dB) Supply Voltage : 5V RF data rate : 1200BPS ~ 128kbps Channel numbers: Multi- channel Linkage range : 2km linkage range at 9600BPS, L. O. S Operate temperature: -30 ~ 80 Size : 80mmx 50mm x 20mm(with casing) Interface footprint: Terminal Block/USB Antenna impedance: 50Ω Major applications Wireless 232 or 485/422 data link Water, electricity, gas and other automatic meter reading (AMR)system; Building automation system; Security entry system; Intelligent traffic; Vehicle Control; Wireless scanner; Restaurant Order System Management; Industrial control, remote sensing, automatic data collection system; Wireless data transmission; Digital audio, digital image transmission; Wireless electronic display screen; Telemetric systems Oil Well Measuring, Environmental Protection Monitoring Hydrology Water Level Monitoring Robot Controls Wireless conference system; Wireless microphone solutions etc. Size : 80mmx 50mm x 20mm(with casing)

Multi-Function Digital Audio Optical Transceiver Introduction Cybervision CA021 Multifunction digital audio optical transceiver consists of digital audio transmitter CAT and digital audio receiver CAR for transmitting 2 channels analog audio and 1 channel digital audio AES/EBU in high-fidelity. In the process of transmission, analog audio convert to digital audio via A/D, and transmit it in digital method. At the receiving end, it outputs 2 channels analog audio and 1 channels AES/EBU digital audio. Multi-channels audio optical transceiver with compatibility with analog and digital can be customized. Features: 1. Be able to transmit analog audio, and digital audio also, automatically identify and switch digital and analog audio at input end, digital signal is priority. 2. Output digital audio and analog audio at same time 3. 24 bit digital decode 4. Audio output balance/unbalance automatically convert; ESD protection, it is more safety and reliable for using 5. LCD in both transmitter and receiver show working status: 1) Optical interface type; 2) laser working wavelength and optical power of transmitter 3) receiving wavelength and optical power of receiver 4) working temperature of optical transceiver and optical modules; 5) Level working status of each channel input/output audio; 6) voltage of dual power supplies for main board; 7) At the optical receiver, the working status and optical link loss of transmitter can be checked 6. System topology can be point to point, point to multi-point 7. Large analog audio dynamic scaleï¼?Max. input/output audio can be up to +18dBm or +24dBm 8. There are LCD for monitoring. 9. There are LED indicators on panel for input/output audio, optical signal, inner statusand, power supply. 10. Power supply support hot back, how swap.

Inner Communication System Optical Transceiver Introduction CA-D inner communication system can construct an optical transmission system by connecting with the equipment with some distance fiber; it can realize the function to transmit multi-channels audio and data signal in two-way via one fiber, extend the transmission distance of ClearCom and Drake brand inner communication system Features: 1. Support Clear-Com and Drake Brand Inner Communication System 2. Transmitting 8 channels audio and 8 channels control data in two-way via single fiber 3. 24bit digital codec 4. Single level transmission distance can be up to 100Km (standard configuration is 40Km) 5. Large audio dynamic scaleMax. input/output audio can be up to +18dBm 6. There are LED indicators on front for input/output audio signal, optical signal, status in the equipment, and power supply

Cybervision CHM-4K series Ultra HD-SDI optical transceiver consists of optical transmitter CHM-4KT and Optical receiver CHM-4KR for transmitting 1 channels 4K ultra HD-SDI signal , or 4 channels 3G ultra HD video, and downward compatible with SD-SDI with bit rate of 143, 177, 270, 300, 1485Mbps etc. With circuit reducing the signal jitter at CHM-4KR, it can deal with the distorted signal well, it can provide more than 120m automatic balance for 3GMbps signal, more than 250m for 270Mbps signal. With built-in distribution amplifier, CHM-4KR provides 2 channels output. CHM-4K supports SMPTE178 standardpassed the test of SDI pathology. Features: 1. Supports SMPTE424M, SMPTE292M, SMPTE259M 2. Supports 3G-SDI/HD-SDI/SD-SDI/DVB-ASI 3. The best solution for live casting by connecting with 4 channels 3G-SDI 4. With cable equalize at the input/Output, it can make up the loss of cable transmission 5. With circuit reducing the signal jitter, it can deal with the distorted signal well. Input/output cable transmission distance can be up to 120m@3G (BELDEN8281 cable) 6. LCD at both transmitter and receiver show working status, it is convenience to operate and maintain: 1) Optical interface type; 2) laser working wavelength; 3) transmitting/receiving optical power; 4) working temperature; 5) input/output working status of each channel signal; 6) voltage of dual power supplies for main board; 7. With clear working status, there are LED indicators on panel for input SDI signal, optical signal, power supply. 8. Supports SMPTE178 standardpassed the test of SDI pathology 9. Dual power suppliers can be selected, which can supply power independently, backup redundantly 10. Network management can be selected, support SNMP and web monitoring

The equipment is widely used as a termination point for the feeder cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building. Can be used indoor or outdoor.

FSM-80S fusion splicer is core-to-core alignment single fiber splicer succeeding to 60S.In addition to ruggedized concept,which 60S created,the fusion splicer 80S has a series of new features,such as Automated wind-protector and tube-heater for quicker splicing cycle as well as fewer operation steps,innovative carrying-case design for quicker preparation,powerful Li-ion battey for longer operation,high resolution bigger LCD monitor,and built-in operation manuals in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.