1. The application of the equipment:
For the production of plastic extrusion. : the material of pvc, ldpe, xlpe, lshf, tpu ext.
2. Technical parameters
1) production scope: the diameter of the conductor: 1-10mm
Finished diameter size: 2.5-13mm
2) extrusion capacity: max 80kg/hr
3) motor power: 15kw(frequency conversion)
4) heating power: 16kw(three section heating with air cooler)
5) center height of the machine: 1000 mm
6) pay-off spool specification: diameter 630mm(pn 400-630mm)
7) take-up spool specification: diameter 630mm(double spool)
The circle thread made from the machine are applicable for the manufacturing of ropes/cables, fishing nets, construction safety nets sun shielding nets, artificial hari, mosquito nets, brushes, as well as protective nets for the cotton fields.
The machine is compacted in its structure. ADC motor is used for stretching, thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.
The spinnerets are produced by the most advanced way, so that the flatness and uniformity of the thread can ensured.
Installing Dimensions 17000¡Á1300¡Á1450 mm 21000¡Á1450¡Á1450 mm 23000¡Á1550¡Á1450 mm.
Scraper is a parts of continuous extrusion machine to make busbar.
We are a manufacturer of production line of copper busbar and spare parts of continuous extrusion machine.
The spare parts of extrusion machine are including extrusion wheel, chamber, chamber lid, coining roller, scraper, dies, abutments (nose), side wheel, drawing dies and so on for conform extrusion machine.
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.
The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
68387 Extrusion Machines Suppliers
Short on time? Let Extrusion Machines sellers contact you.
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.
The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
Plastic Teflon PTFE Rod Extruder Machine For PTFE Rod( 4-20mm)
This PTFE extruder is able to extrude rod which dia from 4mm to 20mm. The automatic
production line is controlled by computer, which is really easy to operate. Meanwhile,
the plastic extrusion machine is advance designed, high output, low energy consumption,
long-life, and also our professional engineer is available to offer overseas after sale service.
We can solve various problems to improve the equipment efficiency for you.
Ram extrusion machine for Teflon rod
The China vertical RAM Extruder Machine is designed with 2 pressure plates, so the ream is affected
via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders.
The main cylinder serves to move the ram; the additional cylinder serves for retracting the
mandrel. Base plate and dosing tray are water-cooled.
The PTFE powder is feed into the rotating hopper via an exact working powder dosing device,
controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into
the cavity of the mould.Range of diameter PTFE Extrusion 4 to 20 mm, Heating zones 4-6
zones.The complete electrical control is laterally fastened at rod ram extrusion. With a PC
touch screen panel all speeds and temperatures can be programmed. Electronics contain
the necessary automatic controllers for speeds and temperatures. Five temperature regulators
are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel
heating element. The maximum output speed of PTFE extrusion depends on: physical property ,
like Specific Gravity and Elongation, outside of PTFE rod diameters and PTFE product heating
length.PTFE Equipment Warranty: according to our standard terms: 12months
Technical Specification:
PTFE Rod Extruder Dia 4mm-20mm
Technical Data
Description Model No. Machine model PFLB-20
Plastic Extruder PTFE
Power 12 kw
Min - Max Dia 4-20 mm
Tolerance 0-0.2mm+
Length Unlimited
Production Per Hour 7-14kg
Electricity Consumption Per hour 2 kw
Weight of the Machine 930 kg
High of the Machine 2150 mm
Floor area of the Machine 3.5 M2
Warrenty for Parts 1 Year
Machine Gurantee Period 1 Year
Free Spares 1 s
Deliver LT 30 Days
Features
1, Automatic control
2, Easy to operate
3, Low power consumption
4, Product size stability
5, Precise sintering
6, Environment-friendly and Energy-saving
Application:
PTFE RAM Screw Extruder products rod, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the rod has a wide range of applications
Aluminum Tubes Line
LJ60 Horizontal Elbow Squeezer or horizontal extrusion press is a specialized equipment which extrudes the aluminum slug into germ tubes, cylindrical objects and other shapes.
Main technical parameters:
A. Tube diameter range: 11mm-22mm
B. Tube length range:
Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products.
Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products.
Main technical data:
Technical specifications type Technical specifications data
Wheel diameter(mm400
Feedstock material Copper/copper alloy
Copper rod diameter 20
Copper bus bar product max.Width(mm170
Round rod product max.Diameter(mm80
Copper bus bar product section area(mm²75-2000
Output(kg/h1300
We are a manufacturer of production line of copper busbar and spare parts of continuous extrusion machine.
The spare parts of extrusion machine are including extrusion wheel, chamber, chamber lid, coining roller, scraper, dies, abutments (nose), side wheel, drawing dies and so on for conform extrusion machine.
The equipment is a one step granulator without drying process in normal temperature. It has the characteristics of campact structure, easy operation, non-three-wastes discharge, low power consumption, small floor space ect. Extrusion granulator is a new type granulator in fertilizer industry, specially used for powder materials such as potassium chloride, ammonium sulfide, Ammonium sulphate, Extrusion granulator Ca, Mg and K.Directly using dry-method extrusion, irregular granule within diameter 2mm~5mm can form, with high-intensity final granules and novel appearance.
the PE single wall corrguated pipe extrusion line consists of as follows
vacuum feeder--hopper ---single screw extruder---die head ---forming table ----winder
On the basis of absorbing foreigh advanced technology.Plastic extruding flat film stretching line is used by micro-processor control frequency conversion and silicone controlled dc etc.The main parts use foreign quality products.The line on large l/d ratio and mixing smelt section on the extruder screw for which is specially parts using quality steel, for the filter changing system we apply advanced foreign automatic filter changing structure.The heating board is changed into advanced stretching hot air oven and principal technical index of the line reach international advanced level.The line has the performance of high speed.Top yield, low energy consumption., good forming quality of the fiber dru.The structure of the line is compact with a pleasing appearance smooth running, flexible and reliable control sophisticated
Diameter of screw¡¨ºo65mm
This machine uses the polypropylene(pp) or high density polyethylene(hdpe) material to produce tapes for ppwoven bags, weaving through production procedures of material heating & extruding, splitting the film into tapes.Stretching & forming tapes, and then winding on the bobbins by winding machine, finally put the bobbins with tapes on circular loom for weaving.
The tape extruding & stretching machines are our, with the use of special and advanced technology, we have refored this series machine many times.Through iproving, the machine can be fit for all kinds of pp&pe material, such as 100% recycled material, powder or grain material, to produce tapes.The screw and barrel of extruder are ade of high quality 38croa1a alloy steel, the hardness is over hv950 after nitriding treatment.It has the performance of easy operation &
Motor power of extruder is 18.5kw
Heating power of extruder is 24kw
Width of die-lip is 600mm
Diameter of drum is 320mm
Number of arch heating plate is 2pcs
Heating power of the plate is 15kw
Stretching ration is 4-7
Production capacity is 30-80kg/h
Winding speed is 20-150m/min
Number of winder is 100spindles
System installed capacity is 98kw
Normal operational capacity is 64kw
Weight is 8000kg
Overall dimension(j*w*h) is 23600*2500*1800mm
This machine is absorbed from international advanced technical and manufactures by ourself, which major in producing monofilament yarn by hdpe and pp material
The monofilament yarn can be widely used for rope, fish-net, safe construction net, article hair, mosquito nets brushes as well as protectives nets for the cotton fields.
The assembly is compacted in its structure.Ad motor is used for drawing thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.The spinnerets produced by the most advance way so that the flatness and eveness of the filaments can be ensured.Stability in motion, sensitiveness in control, convenience operation, high safety and reliability.
Liaoning ZhongWang Group Co., Ltd is the largest aluminum extruder in Asia and the second largest in the world .Company ZhongWang has been offering extruded aluminum profiles for over 21 years. Clients from different parts of the world are a great testimony to our products and services.
ZhongWang offers good quality items at reasonable prices ,we got certifications of ISO9001/ISO14001/AAMA/EN573/EN755/EN15085/TS16949/AS9100.Boeing.Alstom and Bombardier are our customers.
ZhongWang offers different surface of treatments such as anodizing, powder coating, electrophoresis etc .We got presses range from 5MN to 125MN.
We are seeking for an opportunity to show you what we can do for your good company ,please contact us for any further information.
Fd-syj-200 ps pc abs profile extruder machine main used to produce all kinds of ps, abs products, single extruder and the haul-off unit all adopt frequency conversion controlling system, can adjust the whole line; the temperature control system adopt high efficient gauge, can calculate the temperature accurate; the vacuum sizing unit adopting water circling vacuum system, equipped with center water supply and easy connector, make change the different sizing mould very easy, special cooling and sizing system can guarantee the quality of ps and abs products; the haul off unit adopt crawler mounted type, can guarantee the profile keep steady and the same shape; cutting unit is synchronous track unit, can make the cutting surface smooth. This machine has the feature like low consumption, steady character, high efficient etc.
Model apet single layer apet/petg co-extrusion line
Extruder sj120/33 sj120/33, sj65/33
Width of products 500-1500mm 500-1200mm
Thickness of products 0.10-1.5mm 0.25-1.5mm
Motor power 160kw 160kw/45kw
The maximum output 450kg/h 550kg/h
Extruding speed 25m/min 25m/min
Model apet single layer apet/petg co-extrusion line
Extruder sj120/33 sj120/33, sj65/33
Width of products 500-1500mm 500-1200mm
Thickness of products 0.10-1.5mm 0.25-1.5mm
Motor power 160kw 160kw/45kw
The maximum output 450kg/h 550kg/h
Extruding speed 25m/min 25m/min.
