Items Method ZD500C3 Grease Type Lithium Grease Color Yellow or Blue Texture Smooth and transparent NLGI 3#Thickener Type Lithium base-12-hydroxy Thickener Content 13%-15% Penetration Worked 60 GB/T 269 240-250 Dropping point min GB/T 4929 135-140 Copper Corrosion GB/T 7326 pass Base Fluid Properties Base Fluid Type Mineral Viscosity @40 cst GB/T 265 185 Viscosity @100 cst GB/T 265 12 Pour Point -20 Propertie Great in anti-water; Better mechanical invariability; Better anti-rust; Good oxidation stability; Can take place of calcium base and sodium base greases. This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Appearance White Ingredient PFPE Thickener PTFE NLGI 2# Work penetration,25C 0.1mm 265-295 Drop Point / Run off(99C 22h),%
Grease Specifications: This product is made from composite metal soap thickening refined mineral oil, adding extreme pressure and anti-wear additive, anti-rust additive and anti-oxygen additive, etc. to the mineral oil. The lubricating grease has long service life at high temperature. Grease properties: Excellent high and low temperature performance, extreme pressure anti-wear property, water resistance, anti-rust property, mechanical stability and colloid stability. Grease Application: 1) Suitable for lubrication of friction parts of wheel bearings, chassis, motor pumps etc. of vehicles such as saloon cars, motor-buses and heavy load trucks under high speed, heavy load and other harsh conditions. Service temperature:-30180 -
We understand the demands of crankcase lubrication; the importance of water tolerance, of long-term bearing life, and protecting against corrosion. Bio Mileager Crank Case Oils offers protection against corrosion and wear, and the same load-bearing capabilities regardless of your geographic location.
Bio Mileager Crank Case Oil Additives are 100% herbal additives which really determine its performance properties. Bio Mileager Crank Case Oil Additives extend the viscosity range of the oil, allow it to withstand high pressures and loads, handle contaminants in the crankcase, and reduce friction for improved fuel economy.
Reduced soot and coke creation in the combustor. Sustained engine power levels. Reduced coke buildup on fuel nozzle face. Extended fuel-nozzle cleaning intervals. Reduced generation of smoke and particulates.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Roll blank is cast by imported centrifugal compound casting equipment. High Ni Cr Mo alloy is adopted, the thickness of the alloy layer is large and even 30-35mm, and the hardness is up to Hs78-80. Through shaft cold assembly technology or half shaft end cover forging shaft head is adopted, which can be processed and manufactured according to the requirements of different models of users. It has been used by many imported rolling mills, and various technical indexes have reached or exceeded foreign standards.
Steam turbine high temperature sealing grease MFZ-2 is a specific product for power plants from Dongfang Yoyik. The company is located in the industry city of southwest China, Deyang. We provide spare parts of DC power units, including valves, bearings, servo valves, filters, EH pumps, adhesive, O rings and many other components and replacements. We also offer products of EATON/PARKER, MOOG, Vickers, PALL and so on. Yoyik offers different valves and pumps for power plants, and other spare parts for steam turbine, turbine generator, boilers as follow: slot wedge & strip assembly 2Q2939 EH Oil Outlet filter HC9100FCZ8Z turbine AST solenoid valve HQ16.81Z bladder B2320D-581000C Steam Turbine Actuator Servo Valve WZK.W.01.J.0698 Pressure Switch RC0450CZ089H Strainer D600B-265200A Pressure Switch 0.03-0.6Mpa Explosion-proof: EXEDIIT4-T6 851580801 spiral wound gasket D600B-296000A002 Filter of Sealing Oil Outlet Filtration AR4-8 cellulose filter HY-1-001HTCC ADJUSTING WASHER M181.231.075 sealant injector 3Q3358-9 actuator filter B156.33.42.08 EH oil pump discharge working filter V6021V4C03 epoxy anti-coronaLaminate plate wedge strip 9332 SPECIAL STUD D350B-021000A002 EARTH ELECTRICAL BRUSH C1NQ.252.166 filter QF2260BG10XC servo valve SF-21 600MW turbine AC Auxiliary oil pump (TOP)impeller 125LY-36 Pressure Switch RC861CZ090HY908 LVDT Position Sensor ZDET-300A Bimetal Thermometer WSS-401-C Fluoro Rubber O-Ring OR0311638 wet solenoid directional valve 4WE6X/SG24NZ5L stainless steel filter SFX-660*40 EH oil main pump discharge filter (working)/EH pump filter/pump discharge filter/EH pump working filter W.38.C.0129 diatomite filter ZS.1100B-002 wear-resistant steel ceramic tube sealing grease MFZ-2 precision filter WU6300*400 TSI Preamplifier CON021/916-100 vacuum oil tank float valve DN80 BYF-80 insertion element F3-CV1-16-D105-L-40 nut GB/T6175-2000 EH oil regeneration filter HPU-V100A stator cooling water coupling DFB125-80-250 TiteSealHydrogen sealing Sealant T20-75 globe throttle check valve KJC50C-4.0P stator cooling water pump DFB125-80-260 epoxy RTV adhesive HEC-51106 vacuum oil pump filter HS74499 sealant injector KH32/3Q3358-9 Pressure Gauge Y-60ZT bellows globe valve (flange) 50FWJ1.6P Bolt Heater HY-GYY-1.2-380V/3 Hex Cylindrical Screw M237-265000A017 GASKET D135A-261000A019 solenoid relief valve ECT5-10F-08-M-U-H5-30TB Brush NCC634 32*32*64 Sensor DET-300B solenoid valve 300AA00126A Supporting Board 162YR41-16 Power Source for Hot Spot HSDS-20/D bellows relief valve BXF-40II Probe CWY-DO-813505 Hold Down Ring D150C-261000A008 Thermal Expansion Sensor TD-2 lock nut JB/T1700-2008 Solenoid valve DH1-0631/2 220VDC sealing grease MFZ-2 [DFMY-2019-9-16]
Germany Pressol 500cc Grease Gun The quick details of the germany pressol grease gun Quick Details Type:Hand Grease Gun Max. Pressure:7000-10000 psi Place of Origin:China (Mainland) Model Number:NA-839 Cartridge loading:14oz Bulk loading:400cc G.W: 14KG N.W:13KGHead Cap:Zinc alloy die / Aluminum alloy die Cartridge loading: 14oz Bulk loading: 400cc Container tube size: 56x1x280mm Finish: Oven painting. Could be silver gray, red, black, and so on Supply AbilitySupply Ability:120000 Piece/Pieces per Month Packaging & DeliveryPackaging DetailsColor box, White box, and plastic bag. Port : Shanghai or NingboLead Time :30 days Specifications Grease gun, Germany type 14oz, 400cc, 7000-10000psi, 400-660bar (Optional) 6" steel hose, 12" flexible hose, standard couplerProduct Description Germany type grease gun Name of product Hand Grease Gun Model number NA839 Capacity 400CC Pressure7000-10000Psi Quantity 10PCS G/N.W 14/13 CTN size 40*39*28.5 Zinc alloy die cast head (Durable model) and Aluminum alloy die cast head (Economical model).Wide rolled thread design for fast and easy reloading.Soft rubber grip on lever handle for comfortable operation.
Quick Details Type:Hand Grease Gun Max. Pressure:10000PSI Size:400x390x285mm Place of Origin:Shandong, China (Mainland) Warranty:12 Months Capacity:400cc Pressure:10000PSI Head Cap:Aluminum Die Cast Cap Packaging & Delivery Packaging Details: color packing and master carton Port: Qingdao Lead Time : Shipped in 40 days after payment
Bio Mileager 4T Plus is premium quality multi-grade engine oil (SAE 20W40), formulated to meet the requirements of high performance 4 stroke two and three wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycles.
Bio Mileager 4T is premium quality multi-grade engine oil (SAE 20W40), formulated to meet the requirements of high performance 4 stroke two and three wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycles.
Bio Mileager Kerosene Lubricity Additive is a herbal fuel additive which forma protective layer on metal surface to prevent wear and tear. It improves the equipment life.
Bio Mileager MP3 Grease Oil Additive is a MULTI-PURPOSE GREASE MP3 of premium quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance. specifications. This grease provides maximum protection by adhering well to the lubricated bearing surfaces sealing them from dirt and abrasive contaminations
Bio Mileager WB Grease It is made from herbal , refined & filtered mineral lubricating oil and other additives. The grease is homogeneous and of fibrous texture, free from objectionable odour and visible impurities.
Bio Mileager Chasis Grease additive is made from herbal soap, refined & filtered mineral lubricating oils, suitable pacifier etc. The grease is smooth, homogeneous, free from objectionable odour and visible impurities and abrasive of deleterious particles.
