Jaw Crusher is one of the main types of crushers in a mine or ore crushing process plant and also is one of the most widely used crushing equipments in mining industry. ZHONGBO is a famous jaw crusher manufacturers in China, and sold crusher machines to all over the world. ZHONGBO Jaw crusher has the features of high reduction ratio, uniform granularities, simple structure and easy gbomachine.com
Impact crusher can deaI with any large, middle, and small material (granite, Iimestone, concrete, etc.) with length no longer than 500mm, and compressive strength less than 350Mpa. It is widely used in mining, highway, railway, and
Impact crusher can deaI with any large, middle, and small material (granite, Iimestone, concrete, etc.) with length no longer than 500mm, and compressive strength less than 350Mpa. It is widely used in mining, highway, railway, and
Impact crusher can deaI with any large, middle, and small material (granite, Iimestone, concrete, etc.) with length no longer than 500mm, and compressive strength less than 350Mpa. It is widely used in mining, highway, railway, and
Mobile Impact Crusher also called portable impact crusher, wheel mobile impact crusher or tyre mobile impact crusher. Our mobile impact crusher adopt the latest manufacturing technology, high-quality chrome hammer, wear-resistant liner and feeder. With its high crushing ratio and refined grain shape, mobile impact crusher has a broader
Jaw Crusher is one of the main types of crushers in a mine or ore crushing process plant and also is one of the most widely used crushing equipments in mining industry. ZHONGBO is a famous jaw crusher manufacturers in China, and sold crusher machines to all over the world. ZHONGBO Jaw crusher has the features of high reduction ratio, uniform granularities, simple structure and easy maintenance. There are two types: primary Jaw Crusher and secondary fine Jaw Crusher. The compressive strength of
Jaw Crusher is one of the main types of crushers in a mine or ore crushing process plant and also is one of the most widely used crushing equipments in mining industry. ZHONGBO is a famous jaw crusher manufacturers in China, and sold crusher machines to all over the world. ZHONGBO Jaw crusher has the features of high reduction ratio, uniform granularities, simple structure and easy maintenance. There are two types: primary Jaw Crusher and secondary fine Jaw Crusher. The compressive strength of
Impact crusher can deaI with any large, middle, and small material (granite, Iimestone, concrete, etc.) with length no longer than 500mm, and compressive strength less than 350Mpa. It is widely used in mining, highway, railway, and
Impact crusher can deaI with any large, middle, and small material (granite, Iimestone, concrete, etc.) with length no longer than 500mm, and compressive strength less than 350Mpa. It is widely used in mining, highway, railway, and
Coal mill is made up of the feeding device, main shaft, rotating part, gearing, feed and discharging device, high pressure starting equipment and lubrication system is used to grind and dry coal with different hardness. Coal mill features are include reasonable structure and high grinding efficiency which make it the ideal coal dust making machine. Coal Mill is widely applied in the industries of cement construction materials, thermal power generation, metallurgy industry and chemical engineering.
Energy saving ball mill is a low energy consumption grinding equipment, compared with the traditional ball mill, it is a popular environmental protection equipment, such equipment can effectively reduce the users cost, improve the utilization rate of users.
Batch ball mill also called one time feeding materials grinding mill,also called ceramic ball mill,can adopt the intermittent work,widely used for the ceramic materials,K-feldspar,quartz sand fine grinding,and coating materials mixed grinding,this ball mill can adopt different liner type according production and design,to satisfy different requirements, reply controlling the ball mill working time to control the grinding materials output size,because every time feeding ,discharging,need to stop
The structure of the overflow ball mill is basically the same as that of the lattice ball mill, except that there is no discharge lattice at the discharging end of the cylinder. Furthermore, the surface of the hollow journal bushing is equipped with an inverse spiral blade, which can return the spilt balls and coarse ores from the slurry to the mill. The grinding product of the overflow ball mill is free overflow through the discharge hollow journal. For this reason, the level of slurry in the cylinder must be higher than the lowest busbar level of the discharge shaft neck.
Metal catalyst use metal honeycomb as subsstrate, and coat precious metals and rare earth as catalyst.The catalyst will make CO, HC and Nox active and take part in the oxidation-reduction reation.It coverts the harmful into CO2 ,H2O and N2to meet the emission standard. 1.Strong adhesive coating,reliable converting performance 2.Less precious metal formula meeting conversion requirement,cost effective 3.Low light-off temperature and wide converting temperature window 4.Meet Euro 4 and Euro 5 standard
PF Series Impact crusher can deaI with any large,middle,and small material (granite,Iimestone,concrete,etc.) with
There are tin foils in many places in life, such as chewing gum, chocolates, and over-the-counter packaging. They all have a certain aluminum content, and recycling of these wastes will result in a lot of metal aluminum resources. Since aluminum and aluminum alloys have good ductility, their use in life is very broad. So how can these aluminum-plastic composites be completely separated into aluminum and plastic? Dongying Group gave a perfect answer - Aluminium-plastic separation equipment refers to equipment that completely separates aluminum-plastic composites into aluminum and plastic. The equipment is suitable for handling scrap and waste of various pharmaceutical factories, aluminum-plastic board factories, food and beverage factories and other aluminum foil packaging industries. For example, used bags, capsules, toothpaste, wow bottles. Aluminum plastic bags, candy bags, tea packaging, and decorative aluminum-plastic plates. The aluminum scraps can be smelted by the recycled aluminum foil in the equipment, which is the finest raw material for the silver powder factory, the fireworks factory, and the aluminum factory (trained into aluminum ingots); the PVC plastic can be pressed into pieces, and the tube can be used for packaging and conveying pipelines. Great potential. The main advantages of Dongying Group's aluminum-plastic separators are as follows: 1. Complete dry physical separation will not cause secondary environmental pollution. 2. The separation rate of aluminum plastic is as high as 99%, with good social and economic benefits.
There is no doubt that continuous waste plastic pyrolysis plant is based on batch equipment design, so their main pyrolysis process is consistent with the principle, the latter is only more intelligent and easier to operate, which also reduces the more manpower and material resources. Its main advantage over small pyrolysis equipment is that it can continue to work 24 hours a day. There is no need to stop in the middle because of loading and unloading or cooling, which can save a lot of time and make the whole process more efficient. First of all: Put the collected plastic products into the plastic crusher and crush the waste plastic. This will not only save space but also accelerate the reaction speed of waste plastics in the furnace, and in short, it can improve the operating efficiency of the equipment. Secondly, the broken waste plastic is fed into the reactor through a pusher and the reactor is heated. The temperature of the reactor reached a certain height, and waste plastic pieces cracked out of oil and gas, carbon black. Once again, the oil and gas that has been cracked enter the condensing system. When the hot oil and gas meets cold, it is liquefied into heavy oil and falls into the oil tank. Then: For the treatment of the three wastes of waste gas and waste water generated during the operation of the equipment, the company launched a desulfurization and deodorization tower system to thoroughly help customers solve the problem of factory odors and meet European and American environmental protection and emission standards. Finally, the carbon black be outputed. Advantages of continuous pyrolysis equipment: 1. The PLC control system can improve equipment operating efficiency.Because it can continuously feed materials continuously for 24 hours. Great savings in manpower and material resources. 2. The single machine processing capacity is large and the floor space is small, saving the cost of purchasing land in the previous period. 3. Use an accurate calculation system to ensure that the feed is fully cracked and the oil yield is high. 4. Indirect heating system, long service life. The end products of DoingGroup's continuous waste plastic cracking equipment mainly include fuel oil, carbon black and combustible gas. Their specific uses are as follows: 1. Fuel: Mainly used for heating oil in iron and steel plants, and boiler plants. It is also commonly used in heavy oil generators to generate electricity. 2. Carbon black: Carbon black briqutting can be produced for burning, refining from carbon black , can be produced for new tires, and pigment manufacturing materials.
scrap metal chrusher is a professional equipment to crush metal cans into the required size from 10-30mm. Metal scrap processing machine is mainly used for waste recycling field. Our scrap metal crusher machine is used for scrap cans recycling in large-scale recycling centers, which is collecting cans, paint bucket etc. The scrap metal chrusher machine has the advantages of high yield, low energy consumption, high efficiency, the material is crushed uniformity. It is low noise, no pollution, simple operation and easy maintenance etc. scrap metal chrusher machineis in the use of hammer to strike with high speed and high torque of the motor driving, Scrap metal cans will come from the top opening into the crushing chamber, in the crushing chamber, there are durable lining board and hammers and rotor, the high-speed rotating can extrude,tear,impact,and grind scrap metal cans into small granules, then discharged from the bottom of the sieve plate with changeable mesh size according to crushing size.
The DoingGroup's waste plastic cracker is a high-temperature pyrolysis chemical reaction performed in an oxygen-free environment. This reaction can reduce the bulk of macromolecular compounds, waste plastics or other organic solids into small pieces. Molecular compound. Of course, in addition to waste plastics, you can use this cracking device to treat other organic solids, such as waste tires, waste rubber, and other organic solid waste. The Dongying Group has always been committed to the research and development of refining equipment and has made its contribution to the industry second to none. With the maturity of the domestic market, DoingGroup has turned its sights around the world and established an office in Thailand. At the same time, we have The cracking equipment is also known and sought after by people in various countries around the world. The DoingGroup's waste plastic cracking equipment is so popular because of its high oil output rate. Our equipment has different capacities. Taking 10 tons of equipment as an example, 4.5 tons of fuel can be obtained in one day of operation. According to the conservative calculation of the value of fuel in the market, a day's worth of 1,800 dollars will be obtained for the fuel produced by the equipment. Of course, this benefit does not include carbon black and the income of steel wire. So why did the DoingGroup's cracking equipment have such a high oil output rate? First of all, DoingGroup's waste plastic cracking equipment is designed with a vacuum device, which can provide negative pressure and drain oil and gas. This device ensures that even if the oil and gas are not fully condensed in the condensing system, they will pass through the pressure and be filtered again in the condensing system until the oil and gas are fully filtered. Second, use the most advanced and most effective condenser in the industry. This type of condenser uses column tube condensation, also known as a three-stage cooling system, which ensures that the cracked oil and gas is fully cooled and the oil yield is high. Finally, the DoingGroup's cracking equipment has oil-water separators. It not only can purify oil and gas, and separates water from oil and gas, but also can prevent the backflow of oil and gas and increase the oil yield. Contact: Ms Bonnie Phone: +86-371-5677 1821 Mobile/Wechat/Whatsapp:0086-135-2669-2320 Skype: bonniezhao2 Email: oilmachine@doinggroup.com http://www.recyclingpyrolysisplant.com http://www.doinggroup.com
Old tire pyrolysis technology is a green technology that solves waste tire pollution to the environment. And can ease the energy crisis, in today's society, this is a very meaningful environmental protection industry. Tire pyrolysis oil is an end product extracted from the pyrolysis process and is often used to heat raw materials and generate electricity with heavy machinery. If the pyrolysis oil is subjected to a specialized pyrolysis oil distillation plant distillation, the extracted diesel oil can be used for diesel generators and light fuel oils. The main part of the entire pyrolysis system includes reactors, transmissions, catalysis rooms, cooling pipes, manifolds, heavy oil tanks, light oil tanks, condensers, oil-water separators, safety devices, vacuum systems, dust collection systems, etc. The main working principle of old tire refining equipment: By pyrolysis of the oil using a high-temperature distillation tire, the impurities in the oil are distilled off, and the filtered light oil vapor increases in heat, and impurities in the pyrolysis oil fall into the furnace. Light oil and gas passes through a multi-stage heating system, is filtered, enters a cooling system, is then liquefied, passes through a water separator, and flows into a light oil tank. After degreasing and desulfurization, clean and transparent diesel oil can be obtained. The average diesel yield is 80%-85%. Finally, the residue in the furnace is discharged from the furnace. It is a substance that functions like asphalt. The approximate yield of bitumen is: 15%-20%. The end product of the Dongying Group's used tire refining equipment was diesel oil and asphalt. What are their main uses? 1. Diesel: Mainly used for heavy machinery, generator power oil, and boiler heating combustion oil. 2. Asphalt: Mainly used for direct paving, or sent to asphalt refineries.
