We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
40Kw Off Grid Inverter With CSA/UL Approved Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply. 1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. Itâ??s service life can up to 15 years or more. 2. Intelligentized, modularized, simple structure design with powerful function. 3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 4. The output frequency can be setting via LCD panel, itâ??s very convenient for customer. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage. 8. Low Frequency Transformer, which ensures that inverter has high efficiency. 9. High conversion efficiency, Max. Efficiency 94%,if 48VDC input, the efficiency can more than 85%. 10. Adopts black pure aluminum radiator, which confirms the best radiating performance. 11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V. 13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.
SANDI 30KW DC to AC inverter with 120/240V split-phase off grid inverter with CSA/UL1741 Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply. Technical Features: 1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. Itâ??s service life can up to 15 years or more. 2. Intelligentized, modularized, simple structure design with powerful function. 3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 4. The output frequency can be setting via LCD panel, itâ??s very convenient for customer. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage. 8. Low Frequency Transformer, which ensures that inverter has high efficiency. 9. High conversion efficiency, Max. Efficiencyâ?¥94%,if 48VDC input, the efficiency can more than 85%. 10. Adopts black pure aluminum radiator, which confirms the best radiating performance. 11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 12. Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V. 13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.
Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply. Technical Features: 1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more. 2. Intelligentized, modularized, simple structure design with powerful function. 3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 4. The output frequency can be setting via LCD panel, it's very convenient for customer. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage. 8. Low Frequency Transformer, which ensures that inverter has high efficiency. 9. High conversion efficiency, Max. Efficiency 94%,if 48VDC input, the efficiency can more than 85%. 10. Adopts black pure aluminum radiator, which confirms the best radiating performance. 11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V. 13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.
1. architectural membrane materials; 2. industrial fabrics like tent materials; truck cover materials; inflatable boat materials; pool cloth and mesh; 3. advertising inkjet materials like flexible banner; backlit; frontlit; blockout; graphic vinyl; 4. wrapping film; 5. pvc foam board; 6. floor.Transportation, customs clearance, shipping
Low cost portable shipping container home sales Quick Details Place of Origin: Hebei, China (Mainland) Brand Name: WZH- container home Model Number: 20ft container home Material: Container Use: Carport, Hotel, House, Kiosk,Booth, Office, Sentry Box,Guard House, Shop, Toilet, Villa, Warehouse, Workshop,Plant Product name: Low cost portable shipping container home sales Keyword: container home Structure: Galvanized Steel Frame Color: Customer Made for container home Application: Steel Fabricated House Type: Customizable container home Door: Sandwich Panel Door Size: Costomers' Requirements container home Packaging & Delivery Container Hotel Factory China - Shipping Container House, Container Store, Container House Hotel Manufacturer Packaging Details packed to 20ft container and shipped as SOC or Load into 40ft HC container with proper packing for each material Delivery Time 3-7days Low cost portable shipping container home sales The advantages of prefab shipping container home 1.Customized prefab shipping container home: You can choose what kinds of house you want 2. Light and reliable: the steel structure is strong and firm. wind resistance capacity>220km / h, seismic resistance capacity >grade 8 3.Time and Labor saving and Easy assembly: four skilled workers can finish assembling one standard unit within 4 hours 4.Flexible combination :Mutiple modular buildings can be easily combined horizontally and vertically 5.Wide applications: our container house and prefab house can be used as hotel, mining camp,office,villa, toliet, shop, workshop etc. 6. Good looking and neat inside: Water pipe and wires could be fixed into and be hidden into the sandwich panel Container House, Shipping Container Home, Prefabricated Container House Suppliers China
Product Name: PE coated paper roll; Base Paper Weight: 50~350gsm; PE Weight: 15~25gsm; PE coating Type: single side or double side; Width: 600~1200mm; Roll Dia: 1100~1200mm; Core Dia: 3 inch or 6 inch; MOQ 15 Tons FOB price: TBD Term of Price: FOB Shenzhen port or CIF destination port Port of Loading: Shenzhen port Delivery Time: ~30 days
Application Use for control and connecting cable on data transmission within building management system, speaker audio system and control measurement. Suitable for use in dry and damp environment. Cable Structure & Features Conductor Material : Tinned copper stranded Insulation : Semi-Rigid PVC Drain Wire : Tinned copper stranded Shielding : Aluminium foil laminated screen Outer Sheath ; PVC Sheath Colour : black or gray Technical Data Standard : UL Style 2464 Approvals : UL apporoved Rated Voltage : 300V Testing Voltage : 1500V Flame Retardant : VW-1 Insulation Resistance : Min 20Mx km Min. Bending Radius : 10 x cable diameter Operating Temp. : -30C / +80C
Flat Cable M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables. Features of Our Flat Cables & Wire * Flat, ribbon and twisted configurations, with different levels of flexibility. * Shielded or jacketed cable to reduce signal interference. * Range of pitches and pin configurations to accommodate the application requirements. * Easy to fasten with clamps, adhesive, and tape. We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.
ECG cables also referred to as an ECG patient cable, is a type of cable connection designed for non-invasive heart monitoring, typically used to help diagnose potential heart issues. The ECG cable connects to electrodes which are positioned at specific locations on the patientâ??s body to detect and record heart muscle electrical activity. The cables then transmit the electrical activity back to the ECG device for analysis and diagnosis by medical professionals. ECG Cable Feature [Multiple Leads]: ECG cables usually have several leads placed in specific areas on the patientâ??s body, such as the chest, arms, and legs, to measure the heartâ??s electrical activity from different angles. [Durability]: ECG cables are constructed from top-quality, sturdy materials that can endure repeated bending, tugging, and twisting without sustaining any damage. This ensures that the cables can withstand the rigors of frequent use and remain reliable over time. [Shielding]: ECG cables are shielded to block out external electrical signals, which can interfere with the accuracy of the readings. [Connector Compatibility]: The ECG cables are available with various connector types, including snap, clip, and banana, to fit different types of ECG machines. [Safety]: ECG cables are designed to meet strict safety standards and regulations to ensure patient safety. This helps to ensure that patients are protected from any potential harm during the monitoring process. [Cleaning and Disinfecting]: The ECG cables are easy to clean and disinfect to maintain hygienic conditions, as they come into contact with the patientâ??s skin. ECG Cable Advantages [Excellent Performance]: ECG cables are built to withstand the rigors of twisting and bending, and have been thoroughly tested to ensure optimal performance. The cables are also equipped with electrical shielding to protect the signal integrity, ensuring accurate readings. [Non-Invasive]: ECG cables are non-invasive, which means that they do not require any incisions or invasive procedures. This reduces the risk of infection and makes the monitoring process much safer for patients. Instead, the cables are simply attached to the patient's skin, making it a quick and painless process.
Floating cable which can be applied to underwater robot equipment, either in fresh water environment or in seawater environment. It is widely used in marine exploration robot, underwater ROV UAV remote control submersible, underwater camera, underwater construction, underwater search and rescue robot, pipeline detection robot, submersible pump and the link between various underwater electrical equipment and shore based equipment; Link of signal transmission, power supply and equipment control system from underwater to water.