Canadian Compressor Scrap Suppliers and Manufacturers

R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants

Name: Aluminum Scrap wire Molecular formula: Al Molecular weight: 26.9815 Density: 2.702g/cm�³ Melting point: 660.37�ºC Boiling point: 2467.0�ºC Color and Appearance: Silvery white supply ablity :500 tons per month trade term : FOB,CIF,CNF,EXW Origin: China (mainland) Key Specifications/Special Features: Color: silver white Specification of Aluminum Scrap Wire (1). MOQ: We respond to quantity and price inquiries; (2). Aluminum can press; (3). We also carry other merchandise. The high recovery rate scrap aluminium wire with promotional price (1). Item: Aluminium scrap (2). Easy control and operation (3). Fast melting (4). Discontinuous melting with scrap (5). High efficiency (6). Stable working structure

Stainless steel is an iron alloy with a chromium content of at least 10.5%. Chromium forms a thin oxide layer on the surface of steel, known as the passivation layer. This can prevent further surface corrosion. Increasing the chromium content can improve corrosion resistance. Stainless steel also contains varying amounts of carbon, silicon, and manganese. Other elements such as nickel and molybdenum can be added to impart other useful properties, such as enhanced forming ability and increased corrosion resistance. Waste stainless steel refers to stainless steel waste generated from industrial manufacturing and stainless steel processes, as well as stainless steel equipment that has been damaged or scrapped due to long-term use, and stainless steel utensils used in daily life. Our factory produces approximately 20 tons of stainless steel per day, and we have abundant inventory of stainless steel waste with guaranteed quality. Scrap stainless steel is a high-grade alloy steel with a higher value than ordinary scrap steel.

Copper scrap is an important source of raw materials in industry. All kinds of copper scrap can be recycled and widely used in electrical, light industry, machinery, national defense industry, etc. Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Standard and purity of Hot sale 99.9% purity copper wire scrap Product Description High purity copper wire scrap

Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.

Copper Wire Scrap We have been engrossed in manufacturing and supplying top notch range of Copper Wire Scrap. The offered scrap is processed and segregated by our deft professionals with the aid of pioneering techniques. This scrap is used for manufacturing of copper wires that is used in binding of electric motors. Additionally, the provided Copper Wire Scrap can be bought from us in various specification according to need of clients at pocket friendly rates. Product Description Chemical composition (%): Copper scrap Cu: Bi: Sb: As: Fe: Ni: Pb: Sn: S: O: Zn: P 99.95 0.002 0.002 0.002 0.0050. 0020. 0050. 0020. 0050. 0020. 0050. 001 Wire diameter: 2.5-3 mm Weight/spools: 3, 5, 7, 15, 20kg Tensile strength: 1000, 900, 500, 450N/mm2 Standard and purity of hot sale 99.9% purity copper wire scrap Chemical Components Cu+Ag P Bi Sb AS Fe Ni Pb Sn S Zn O 99.95 0.001 0.001 0.002 0.002 0.005 0.002 0.003 0.002 0.005 0.005 0.02 Shapes: strip and foil Mechanical Property 1. High-purity, fine organization 2. Low oxygen levels, without porosity/trachoma/osteoporosis 3. Very good conductivity and thermal conductivity, good plastic, easy to hot and cold pressure processing

We also have the following products: - HDPE Clear/Natural Regrind (clean and washed) - HDPE Clear/Natural Scrap Baled - HDPE White Regrind/Baled (clean and washed) - HDPE Milk Bottle Regrind - LDPE Film Baled 100, 98/2 and 95/2 - LDPE Clear/Natural Regrind - LDPE White Regrind Specifications HDPE drum scrap 1 ISO,SGS test 2 free sample 3 manufacture 4.factory price HDPE drum scrap 1.Hot water washed and no label, no any contaminant 2.dry and clear flakes 3.white,blue, red, yellow and so on 4.from drums PE FLAKE 1.DENSITY:0.956G/CM3 2.MELT MASS-FLOW RATE:0.04G/10MIN 3.HS CODE:3901902000 4.ELONGATION AT BREAK %500

Top Quality Compressor Scrap Used Electric Motor scrap AC Compressor Scrap Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Monthly Supply Capacity: 500 - 1500 metric tons, Type: Fridges, AC. Packaging Detail: Wood Pallets, 20(40) FCL/ According to ISRI Specification in Containers Quantity: Between 200~500MT per month Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL Detailed Specifications : Compressor Brands : Necchi, Danfoss, Aspera, Ireland, Embraco Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details : 220-240 v 50 or 60 hz. Cooling capacity: 90-190 w displ Size : 5.99 -12.53 cm3 Purity: 99.98% copper inside with connection box Send your message to this supplier Main Specification:

Commodity: LDPE Film C Grade Origin: Canada Quantity: 2 Loads/Monthly Weight: 18 MT per 40'HC Price: USD 250/MT CIF port Klang or advise your destination port

Commodity: LDPE Film B Grade Origin: Canada Quantity: 2 Loads/Monthly Weight: 18 MT per 40'HC Price: USD 320/MT CIF port Klang or advise your destination port

Commodity: LDPE Film A Grade Origin: Canada Quantity: 2 Loads/Monthly Weight: 18 MT per 40'HC Price: USD 430/MT CIF port Klang or advise your destination port

Commodity: PET Clamshell Origin: Canada Quantity: 3 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 140/MT CIF Port Klang or advise your destination port

Commodity: Mix PE Film Origin: Canada Quantity: 3 -5 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 180/MT CIF Port Klang or advise your destination port

Commodity: LDPE Film Mix Color Origin: Canada Quantity: 3-5 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 240/MT CIF Port Klang or advise your destination port

Commodity: LDPE Film Blue Origin: Canada Quantity: 3-5 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 250/MT CIF Port Klang or advise your destination port

Commodity: LDPE Film Grade B Origin: Canada Quantity: 3-5 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 325 per 40'HC CIF Port Klang or advise your destination port

Commodity: LDPE Film Grade B+ Origin: Canada Quantity: 3-5 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 345 /MT CIF Port Klang or advise your destination port

Commodity: LDPE Film Grade A Origin: Canada Quantity: 3-5 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 430/MT CIF Port Klang or advise your destination port