"KARVAN-L" company is one of the first specialized entities manufacturing lacquer products in Azerbaijan. Work experience gained in construction market allows to manufacture lacquer materials both for large users and ad-hoc products adjusted to customer requirements. Highlyskilled specialists of central plant laboratory develop the material formula with special features: physical-mechanical parameters; viscosity, adjusted to customer requirements; different structure of painted surface; frost-resistance, enabling savings during transportation and storage; change in coating and whiteness; changes in elasticity and firmness of top film layer. Modern high-performance equipment, own scientific and research base allows the company constantly expand range of manufactured products and increases its quality. Our company produces more than 50 types of lacquer products: masonry paints, priming, filler, enamel; lacquer materials for metal and timber protection; construction glue and sealers; pentaerythritol-modified phthalic varnish and sunflower oil, coloured and clear varnish for parquet, furniture and other timber materials. “KARVAN-L” products are certified by Azerbaijan Republic State Standard and SanEpidemNadzor (center of sanitary supervision and disease control) authorities. Our company is a repeated winner of contests for supply of masonry paint, road striping coatings and other materials for Construction programs of Baku Government.
Petroleum products like diesel fuel, fuel or other oil refining products , petroleum eqipment , diesel fuel, car benzene, jet fuel, fuel oil.Import, and export
The all-glass enclosing structures of elevator shafts provide the main advantage of perceptible fragility and exquisiteness combined with guaranteed reliability and long life. The panoramic glazing of elevator shafts with architectural shutterproof glass (which is more commonly referred to as a panoramic elevator) has an advantage to conventional enclosed shafts. The main type of elevator shaft glazing Karvan-Glass apply is point glazing: glass is attached to the bearing structure made of stainless or construction steel using point fittings specially designed to compensate for dynamic loads that occur during operation of an elevator. In doing so, the maximum transparency is achieved. The versatility of elevator shaft designs using architectural safety steel is virtually unmatched among other materials. It ranges from full transparency which gives a panoramic view to passengers in an elevator through to modern photoprints on glass capable of embodying any designer’s concept. For instance, hidden glass fittings enable to create a solid structure that shares concept with the decorative glazing of walls.
Automotive oil, marine oil, industrial oil, hydraulic oil, brake fluids, gear oil, atf, cutting oil and other specialty lubricants, as well as lithium and calcium greases.
We sell all types of tyre scrap from Azerbaijan
Petroleum refining is characterized by the largest amount of systems exposed to corrosion compared to any other sector of the oil industry. Corrosion problems occur everywhere, from the points of raw materials delivery up to removal and transportation of the refined products. Corrosion control measures shall be taken at crude oil distillation plants and units for alkali treatment of oil, gas plants, reformer and cracking units, straight run deisobutanizers, units for adsorption of hydrogen sulphide from aqueous solutions, furfural treatment units etc. Liquid composition may vary depending on a particular stage of the oil refining cycle – from sulphurous, acid oil-water mixtures fed to refineries to final products (e.g., gasoline) with negligible water content. It is hardly possible to use any “universal” corrosion inhibitor due to the variety of process mechanisms that may cause intense corrosion of equipment used in the oil sector. The need to ensure property package determining processability and compatibility of the inhibitor with corrosion medium components necessitates development of an inhibitor that would be functional in different corrosive conditions. Oilfield water containing large amounts of chloride ions, oxygen, carbon dioxide and hydrogen causes and promotes further development of local electrochemical processes, which represent the most dangerous type of corrosion and failure of metal. Oilfield practice shows that the most dangerous local corrosion damages also occur in the presence of microorganisms. In order to protect oil equipment against chemical and bacterial corrosion, Karvan-L company designed efficient and cost-effective water-soluble and oil-soluble corrosion inhibitors. Corrosion inhibitors are nitrogen-containing surfactants, produced based on natural acids with addition of film-forming admixtures and biocides.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Packaging & delivery: Depends on your order. Description: Until recently in the construction of sewage wells used only concrete and iron structure. However, it is much better to use plastic manholes. Plastic wells used in the networks of household, storm sewage and lubricant. Plastic wells are also used for arranging industrial technological channels. Wells provide access to drains, shut-off and control valves and measurement technology. In addition, they can be used as drainage, rain receivers and inspection chambers. Plastic wells nesomnitelnymi have the following advantages compared to other types of wells (concrete, cast iron, brick) • a small proportion (compared with concrete) • easy installation, transportation and storage • easy maintenance • long service lines and trouble-free operation • high impact resistance material • connection leaks • resistance to mechanical damage, corrosion resistance • ductility of the material, its resistance to low temperatures, abrasion, UV radiation. • resistance to aggressive chemical environments • blocking leakage of sewage into the soil • high strength of the well shaft • lack of height restrictions • complete sealing of all joints and penetrations • Products are not afraid of frost and mechanical loads. Offered by our company options polyethylene manholes are used for a variety of purposes sama, subdivided into: • Inspection • Stormwater • Drainage • For measuring devices and valves • In order to establish the electrical, instrumentation and automation Also polymer wells divided by functionality: Sight - allowing to carry out maintenance work, which are used in floatable, household and storm water channels. Heavy - intended to collect rainwater, often with sand trap. Perepadnaya - allowing you to connect a channel on a mark above the bottom of the tray portion of the well. Cable plastic well to order - for laying the cabling in the electrical connection. Distribution of plastic wells - sharing household and sewer racks for several tanks settling.
Turnstile, barriers, cctv cameras, akses control systems, card readers, parking systems, q systems etc..
A technology that creates a dim surface and renders it grainy and non-transparent (an operation contrary to polishing). The dimming allows drawing a picture on a glass surface. The dimming is widely used in manufacture of glass and ceramic dishware, decoration elements, imitation jewelry, souvenirs, glass furniture and other glass items. Glass dimming methods can be categorized by five groups: dimming by mechanical treatment; chemical dimming; application of dimmed coating by firing; application of dim paint coats; other dimming methods.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-70.5mm Item: PE 100 pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black Standard: OHSAS 18001 Specification: As your requirement OD: 16-1200 mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Preparation of ?? 100-based polyethylene Pipes is considered as a beginning of a new phase in plastic Pipes production. These Pipes are considered more contemporary and characterized by high pressure resistance. As distinguished from other brands of Pipes (?? 63, ?? 80), these Pipes with less wall thickness have higher mechanical characteristics. Pipes ?? 100 are applied in the following areas: • Underground and surface drinkable and technical water pipeline network • Water drainage system • Field irrigation systems • Oil fields • Chemical and petrochemical industry • Construction of buildings and industrial facilities • Construction of main and local gas pipelines Advantages of PE100 Pipes: • Durability. ?? 100 Pipes obtain 50 years of minimal guarantee, this duration can be extended during operation. • High shock resistance, cracking resistance • High chemical resistance • Resistance to sunlight • Manufactured in standard sizes and in roll form • Smooth inner surface • Suitable for the usage in seismically active areas • Freeze resistance • Wide range of pressure Range of pipe sizes produced under normal pressure • DN - outer diameter of pipe, (mm) • s - pipe wall thickness, (mm) • SDR - Standard Dimension Ratio • M - Estimated weight (kg/m) 20 bar - SDR 9 DN: 16- 630 mm S: 2-70.3 mm M: 0.09-123 kg/m 16 bar - SDR 11 DN: 20-710 mm S: 2-64.5 mm M: 0.116-131 kg/m 12,5 bar - SDR 13,6 DN: 25-1000 mm S: 2-73.5 mm M: 0.148-214 kg/m 10 bar - SDR 17 DN: 32-1200 mm S: 2-71.1 mm M: 0.193-252 kg/m 9,5 bar - SDR 17,6 DN: 40-1200 mm S: 2.3-68 mm M: 0.281-242 kg/m 8 bar - SDR 21 DN: 40-1200 mm S: 2-57.2 mm M: 0.244-206 kg/m 6,3 bar - SDR 26 DN: 50-1200 mm S: 2-45.9 mm M: 0.308-167 kg/m 5 bar - SDR 33 DN: 63-1200 mm S: 2-36.7 mm M: 0.392-134 kg/m 4 bar - SDR 41 DN: 75-1200 mm S: 2-29.4 mm M: 0.469-108 kg/m
We offer various types of honey and honey products, their quality is confirmed by a government agency.We get honey directly from our beekeeping farm, pack it in any form and sell it wholesale anywhere in the world. At the same time, we offer cooperation in this area.
Absheron Import & Export LLC cooperates with hazelnut producers in different regions of Azerbaijan and organizes hazelnut export to various foreign markets. The hazelnut types exported by our company are Shelled hazelnuts (in the shell), Unshelled raw hazelnuts (kernels), Blanched hazelnuts, Sliced hazelnuts, Chopped hazelnuts, Hazelnut meal.
Licorice root from Azerbaijan is excellent for the production of extracts from licorice root, for the production of various types of food products, drinks, confectionery products. If you need the root of licorice of excellent quality please contact us. Our crushed licorice root is widely used in the production of various sets of herbal teas.� It is also great for private individual food and medical, medical and preventive use. The price of types of licorice root 1. Crushed  - 650$ 2. Stick 4 cm - 1450$ 3. Pressed bales-650$
Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol) is a compound with the chemical formula C3H8O. It is a colorless, flammable chemical compound with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether. It is used in the manufacture of a wide variety of industrial and household chemicals, and is a common ingredient in chemicals such as antiseptics, disinfectants and detergents.
Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol) is a compound with the chemical formula C3H8O. It is a colorless, flammable chemical compound with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether. It is used in the manufacture of a wide variety of industrial and household chemicals, and is a common ingredient in chemicals such as antiseptics, disinfectants and detergents.
Dear Sirs We are a producer of pure organic honey from Azerbaijan. Our farm is located in Saatli region where many different kinds of rare herbals such as liquorice, spear thistle and others grow in wild nature. The quality of the product tested several times at the laboratory of the ministry of agriculture and its result is fascinating. However, we are ready for any test of our from any part of the product. We are really interested in exporting our product. Because we think our product worth more than the price we sell in the local market.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Tee Reducing Cross T 90 dgr., Tee Reducing T-Joints 90 dgr. Packaging & delivery: Depends on your order. Description: Thermoformed fittings for PE 100 pipes.
Lubricating properties of low sulfuric diesel fuel with K-Lube additive at device HFRR under method EN ISO 12156-1 (data of JSC “VNII NP” Russia): At present production of highquality diesel fuels is impossible without attaching of additives of various functionality as depressor, cetane increasing, antismoke, washing, anti-oxidizing, dispersive, corrosion inhibitors, anti-wear and many oth. At preparation of multifunctional packets of additives their compatibility are to be considered, as the various surfaceactive substances are able to influence upon functional properties of each other. At usage of “K-Lube” anti-wear additive in packets with additives of other functionality (cetane increasing, depressor-dispersive and other) no contradiction between them emerges. Just the opposite, the “K-Lube” additive operated better than its foreign analogues /proved by following testing hold by JSC “VNII NP” Russia/: Taking into consideration results of mentioned above the “K-Lube” additive possesses high protective effectiveness against weariness and we would to mention that usage of additive at enterprises and petroleum refineries enables to save financial assets. Besides high effectiveness of “K-Lube” additive regarding protection from fuel pumps differing from foreign analogues the product has low pour point without adding any dissolvents (no more than 45 degrees below zero), what facilitates transportation, storage and usage it in cold climatic conditions.
Glass arbors, just like arbors made of more conventional materials, are a fine choice for their key function, which is providing comfort in a garden or a park. Among advantages of a glass arbor: the glass structure can be opening type, so your can rest in an open arbor and enjoy fresh air and flower scent while the weather is good, but hide behind the glass if it aggravates; you can enjoy watching the environment through the translucent façade without perceiving the thin boundary in between; the arbor glazing is a great protection from the weather and wind without impairing the feeling of ‘being in the wilds’; the laced and transparent structure of an even big arbor will not create a visual impression of obstructed space in your garden. What are the design features of glass arbors? The most widespread type of arbor glazing in modern construction is either shutterproof glass of different thickness or safety glass. This material has a number of undisputable advantages: high strength which enables to withstand big wind loads and humming blows; safety in operation which guarantees no cuts in case the glass is broken after all; long life.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black Material: PE Standard: OHSAS 18 001 Types: Elbows 30-45-60-90 dgr.,T-Joints 90 dgr.,Cross T,Y Pieces 45-60 dgr. Packaging & delivery: Depends on your order. Description: PE 100 brand welded polyethylene fittings are adaptor fittings for PE100 high-density polyethylene pipes. These fittings are manufactured by connecting pipe sections by welding. Released PE 100 brand welded polyethylene fittings have the following configurations and types: 15°, 30°, 45°, 60° and 90°. These fittings are designed for pipe connections at the areas, where pipeline directions (turns and branches) and diameter change. PE 100 brand welded polyethylene fittings are connected to pipes by exactly lining-up and welding ends with the help of a special welding set. PE 100 brand welded polyethylene fittings have increased chemical resistance, temperature changes and deformations. These fittings are not subjected to oxidation, and do not decompose for a long time. Operating life of these PE 100 brand welded polyethylene fittings is 50 years which ensures long-term, continuous use of your pipes.