Dutch Packaging Foils Suppliers and Manufacturers

Safetybags by DaklaPack Secondary leak proof packaging - 100% leak and tamper proof. Available in various sizes, suitable to hold a wide range of primary containers, such as blood tubes, specimen containers and swabs. The pouches are easy to close. They are sequentially numbered and incorporate a tamper-evident seal to ensure ease of identification and security throughout the chain of custody. The pouch is made of strong transparent polyethylene, and is guaranteed to keep liquid inside. Easy to close, simply removing the backing strip and applying even pressure across the strip, the pouch is then hermetically sealed. In combination with the transport blister, the PolyMed mailing envelope and sufficient absorbent material, this composition complies with the packaging regulations (P650 and P959). We would be happy to quote you for various formats and for printing, on request. UN3373 Standard â?? Key Requirements The P650 packaging instructions for liquid substances state:- The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, and not contain more than 1kg solid. The secondary packaging shall be leak proof for liquids; (DaklaPack's Safetybags) If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them; (DaklaPack's Absorbing sheets + tube holders) If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging; The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid. One surface of the outer packaging must measure at least 100mm x 100mm (DaklaPack's boxes and shipping solutions are fully conform if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used.

100% leak proof, tamperproof and true 95kpa meets DOT and IATA requirements. We at DaklaPack recently designed and patented our own 95kpa Safetybags�® and have had them fully certified by the BVI. DaklaPackâ??s 95kPa transport bags are ideal to use as a secondary watertight receptacle in accordance with DOT and IATA regulations for shipping Biological Substances. DOT and IATA shipping regulations require that UN3373 Biological Substance, Category B specimens are transported in either a primary container or secondary packaging that has passed the 95kPa pressure differential test. Custom sizes and solutions can be made available - contact us for expert advise.

RigidSafetybag - combining 3 packaging elements into 1 & simplifying the packing process. The patented RigidSafetybag by DaklaPack consists of a 100% leak and tamper-proof Safetybag, a blister like tube holder surrounded with sufficient absorbing material to fully absorb any leaked content from the primary receptacle during the unlikely event of a leakage. Due to the rigid internal component, the filled and sealed RigidSafetybag can simply be entered into a fully labelled UN3373 envelope / box and sent to the receiver. Save time effort and money using this simple solution which is fully labelled with usage instruction and provides 100% tamper evidence due to its destructive seal and tamper text in the side seals.

Supply Capacity - 10 Million Per Month - Russian origin and other, Commodity: New Steel Petroleum Barrels/Drums, --- Note:--- When requesting a quote about products, please send the company full contact information and registration certificate number (all incomplete emails will be excluded).----SPECIFICATIONS----: Prime grade cold rolled steel, as per JIS G 3141 SPCC-SD/Classification: Close & Open Top (Lined/Unlined), Normal Drum Capacity: 210 Litres (55 Gallons, Barrel weight 14.4 kg - 15.00 kg, Steel Thickness (Body): 0.7 mm -1.4 mm, External Height: 882 mm+/- 3mm, External Diameter: 585mm +/- 3mm, Hoops: 2 (Two) Rolling Hoops, Corrugation: Set of 4 (Four) corrugation on either side or rolling hoops expanded in the body, Bungs: 2 (Two) sets, Fitted to the top of the drums (Excluded in Open top), Bungs Size: Large (2) - Small (3/4), Colour: Blue, External Surface: Painted with specially formulated Stoving Enamel Paint to the colour specified by the customer., Internal Surface:1. Plain 2. Primer Coat 3.Single or double coat of epoxy phenolic lacquer lining., Top & Bottom Seam: Seven Triple Seamed, Body Seam: Eclectically Welded. -----------Note--------: The price of steel oil drums is closely related to the global price variables of hot rolled steel coils, from which oil barrels are made, and the price for this period is $ 705 per metric ton on (05 Nov. 2020), meaning a kilo is equal to $ 0.705 and the weight of the barrel is 14.4 kg - 15 kg. Excluding the cost of manufacturing, painting, processing, and shipping. From the above, a country cannot compete in the market if it does not extract iron from local or regional sources. The price of barrels for this period in Asia is $ 14.5 - $ 15.5." In our company, it is different" because the source of raw materials is the same country producing the oil barrels. PRICES LIST From 19-03-2021 TO 19-04-2021 included : - QUANTITY: 500.000 - 1.500.000 CIF PRICE 11.45 USD - QUANTITY: 1.500.001 - 5.000.000 CIF PRICE 11.35 USD - QUANTITY: 5.000.001 - 25.000.000 CIF PRICE 11.25 USD - QUANTITY: 25.000.001 - 50.000.000 CIF PRICE 11.17 USD - QUANTITY: 50.000.001 - more CIF PRICE 11.10 USD We ask direct buyers or intermediaries who target government tenders and private refineries to offer competitive bids and are looking for new barrel prices from 5-6-7... US dollars ... etc. Please do not contact us and request offers to save time for all parties. And when you get a provider with very attractive prices for new barrels exclusively (not used or refurbished), we advise you not to accept any advance payment as a reservation for the quantity even if it was $ 1. And deal exclusively by 100% letter of credit. We wish everyone the success of their business operations EFAKO export department.

CATEGORY Die Cutters - Automatic and Handfed MANUFACTURER GUTENBERG MODEL PLATINE SIZE 1060x810 mm. YEAR 2020 AVAILABILITY Immediately DESCRIPTION: GUTENBERG PLATINE is designed for Cutting, Punching, Embossing, and Creasing, foil stamping on Duplex Board, Paper Corrugated Sheets, Fiberglass sheets, Leather, Sponge, and Solid Fiber Boxes, Puzzle Games, Advertising Displays, with Pressure adjustment, through independent impression can be easily read on the scale from each side, to achieve perfect setting the set value of impression. MACHINE IS having a quite silent running. This Heavy Duty Die Cutter Press, provided with Safety Devices like dwell timing device, this device can be set to give a variable period from one to thirty second .during this time the moving block remains stationary in the open position before automatically resuming motion at the end of the set dwell period. Trip Bar & Safety Guard for Operator safety. With an electro, clutch &brake eliminates the possibility of any time overlap between the driven and braking mechanism. Neither brake or clutch requires oil on any parts so there is no danger whatever under normal condition impairing efficiency resulting from penetration of oil to the friction surfaces. all shafts are from 8/9 alloy steel and pins are grounded, bushes are from phosphorus bronze metal, SKF/NBC bearings, Electromagnetic Clutch, And Brake System Is Adjustable. Up To Microns, Main Driving Shaft Is Equipped With Two Sets Of Double Helical Self Lubricatedimported Polyamide Pinions Main Electric Operation And Control Panel Are Equipped With Siemens/ L&T / T, Main Flywheel Is Locked With Chechnuts System. Automatic Centralised Lubrication, Quick And Simple Adjustment Of Impression Is Made Through Two Electric Bushes, Excellent Outlook With Best Quality Paint And Powder Coated Fitting, All these Features That Make Gutenberg Platine most reliable compared to the other Voltage 230 V Frequency 50 Hz Power 2.5 H.P. Strokes Max 1600 Machine Available in different Sizes 50x66 cm,55x81 cm ,63x93 cm,81x106 cm,93x129 cm,106x157 cm,132 x 182 cm,215 x 266 cm,101 x 137 cm

CATEGORY Sheetfed MANUFACTURER Heidelberg MODEL TOK COLORS 1 31 Millions SIZE 3900x2800 mm. YEAR 1985 AVAILABILITY 2022-04-12 DESCRIPTION: Sheet size: min 105 x 74 mm, max 394 x 280 mm Printing speed: max 10,000 sheets/hour Printing units: 1 Machine size: Length: 1,250 mm, Width: 1,100 mm, Height: 1,480 mm Total weight: kg 560 / lbs 1,235 Power: KW 1 / hp 1 Chain delivery Continuous-film dampening system pre-piling device chromed cylinders electronical double sheet control Fehlbogenkontrolle

Second hand Flat/Satchel Bag Making Machine with window unit Matador NP38 Mfg: 1980s (approx.) Mfgr: W+H Bag Width : 60 380 mm Cut. Length : 200 600 mm Max. Web width : 1060 mm Approx. 30 cut-off gears & 10 forming plates available All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales. All information provided in this offer is from the source(s), which is/are deemed reliable and trusted.

The quadropack pack 1 is a high speed flowpack machine designed for flexibility and durability. The servo driven design works in continuous mode with cross seal units that are equipped with rotating tools and single or multiple sealing bars. The machine is able to achieve speeds up to 600 ppm. In combination with automatic feeders. Unpacked, ex works, weight and dimensions depending on model.

TASTE-4-ALL SPICY UMAMI FLAVOR (Known under the popular name: SPICY UMAMI) SPICY UMAMI is a natural powder flavor made from various herbs and spices combined with natural yeast extract. Clean label, so no E numbers, no artificial color, no preservatives, no anti-caking, no artificial anything! Halal and Kosher certified. A real Taste-4-All product, applicable in numerous food products. Examples: Sausages, Soups, Pastas, Nuggets, Chicken (Wings), Dressings, Seasonings, Canned Meat/Fish, Vegan Products, Canned Vegetables, Savory bakery products, Chips, Meat products etc. Simple to experience the taste: dissolve a teaspoon of SPICY UMAMI in a glass of hot water and taste. Use: SPICY UMAMI can be used in a very low dosage as taste supporter, like in canned vegetables. Or as a main taste giver in a much higher dosage in for instance sausages. Dosage: experimental depending on taste. Note: Keep packaging closed when not in use.

Order number: 464300 External length: 165 mm External width: 130 mm Internal length: 150 mm Internal width: 100 mm Material: PET-NY-PE Thickness: 160 mu Closure: Security tape P620: Yes P650: Yes UN3373: Yes Air Transport: Yes Road Transport: Yes

For efficient and sustainable packaging of food and non-food, our new flat bags are the ideal choice. Available in fresh and popular colours such as; pink, light green, light grey and white. All bags com with a modern and stylish matt finish. Due to the material composition, these flat bags are fully recyclable and have an excellent barrier. They are very suitable for powders, sports supplements, pills, seeds, sweets, jewellery, creams, beads or to send samples to your customers. There is a choice of two sizes; 70mm x 110mm and 80mm x 130mm and they are very functional to use. The tearnotches (notches) allow the user to open them easily. All sizes and colours are available both with and without grip closure. Request a free sample or contact us to enquire about the possibilities of printing them and producing them completely customized for you. Standard colors: grey - pink - green - white Standard sizes: 70 x 110 mm - 80 x 130 mm Tailor made and printing possible from 10.000 pieces

The first fully recyclable shaped spouted pouch available on the market. Made entirely of a mono material (low density polyethylene with EVOH barrier properties) these pouches are 100% recyclable under the code 4 recycle code (most supermarket and recycle centres offer code 4 drop of points) The pouches are ideal for single use refills of for example; Cosmetics - Coffee scrubs, Dense soaps, gels, Shampoo, Conditioner, Shower gel, Concentrate for products such as (add water to mix) Soap / Detergents - Fabric softener, Car cleaning products, Screen washer fluid, Meal kit sauces / pasta. The pouches are pre-formed and can be filled by the opening on the top edge and sealed using conventional heat sealers â?? the end user can easily access the product by removing the tip of the shaped pouch & easily dose out through the created opening. Available in 5 formats â?? and from just 100 pieces per size. We can also provide you with a fully customized version â?? with full colour printing & custom format from just 10,000 pieces per size. Standard color: transparent Standard sizes: 50 ML - 100 ML - 250 ML - 330 ML - 500 ML - 1000 ML

DaklaPack - IV UV Protection bags Protect medication from harmful UV light! DaklaPackâ?? s IV UV Protection bags are ideal for protecting IV Infusions, medications, and even nutritional bags against harmful ultraviolet light. Ultraviolet light can cause oxidation, hydrolysis, and loss of potency to sensitive medications. Simply place the IV bag (even bottles, piggyback container & syringes) inside of the IV UV Protection bag to ensure medication potency. The amber colouration protects against UV light whilst offering enough transparency to check fluid levels & flow rates. available in 2 sizes - 135mm x 250mm + 200mm x 400mm and made from a strong 120micron Polyethylene. â?¢ Perfect for cytostatic iv bags & nutrition bags. â?¢ Manufactured from a strong ultraviolet inhabitant polyethylene â?¢ Tested from wavelength 500nm to 320nm with max 5.36% and min 0.15% across the spectrum â?¢ Fully evaluated by SGS and test reports are readily available with full wavelength transmittance curve. We can also provide you with custom sized IV UV protector bags, with a completely custom print, ideal for private health sector organisations. Contact us for more information.

I am offering the following 3 party product As a intermediate for my Client Specification: New oil steal barrels Quantity: 1.000.000 $ 84,2 price per barrel including insurance and freight (CIF) ( 3% 3 party commission included in the price) Barrel Specifications 0.9mm body, 1.0mm top and bottom Shipping possibility's: World wide Kind regards Abdoulaye Sene

In addition to our standard range of Spoutbags, we have the possibility to produce tailor made pouches, supplied on rails with end clips, allowing you to fill larger quantities effortlessly. The Spoutbags on rail system also allows machine operators to enter multiple pouches into the filling machine without having to manually handle each and every pouch, so the operator can focus on the actual filling process instead of manual insertion. Our Spoutbags on rail system (including caps) integrates flawlessly with existing filling machinery currently available in the market. The pouches are suitable for pasteurization and sterilization as well as being suitable for both Food and Non-Food applications. We have the possibility to produce tailor made pouches, supplied on rails with end clips, allowing you to fill larger quantities effortlessly. The Spoutbags on rail system also allows machine operators to enter multiple pouches into the filling machine without having to manually handle each and every pouch, so the operator can focus on the actual filling process instead of manual insertion. Our Spoutbags on rail system (including caps) integrates flawlessly with existing filling machinery currently available in the market. The pouches are suitable for pasteurization and sterilization as well as being suitable for both Food and Non-Food applications. Standard color: silver Standard content: 70 ML - 90 ML - 150 ML - 200 ML Taylor made and printing possible from 10.000 pieces