After drilling, we need to pump the cement to the well to cementing , In the Wells of high temperature and high pressure environment, in order to ensure the performance stability of the slurry, used the cementing additives.
Our CSA cement has below advantages: a. Rapid Strength Gain: It can improve your output and save more time for you. b. Lighter than Portland cement c. Lower Alkalinity d. Lower Shrinkage e. Shorter Curing Time Strength grade: 42.5 & 72.5 Initial setting time: Not early than 6 minutes (Can be customized) Final setting time: Not later than 9 minutes (Can be customized) Stripping time: Not later than 60 minutes in summer (Can be customized) Not later than 180 minutes in winter (Can be customized) Test report: (For 42.5) Specific surface area: 434 sqm/kg Initial setting time: 6 minute Final setting time: 9 minute Flexural strength: 1st day: 6.2Mpa 3th day: 7.3Mpa Compressive strength: 1st day: 32.5 3th day: 45.2Mpa Test report: (For 72.5) Specific surface area: 489 sqm/kg Initial setting time: 8 minute Final setting time: 11 minute Flexural strength: 3rd day: 7.6 Mpa 7th day: 8.7 Mpa Compressive strength: 3rd day: 56.3 Mpa 7th day: 74.4 Mpa Application: a. Artistic concrete fence b. Repair engineering, such as patching roadways, sidewalks, airport runway c. Bridge deck and highway engineering d. Precast concrete products e. Lightweight hollow core concrete slab f. Construction in winter or cold day g. Mixed with OPC cement for shortening the setting time of concrete
Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
SUMMARY 1. Provides fluid loss control in low, normal and high density cement slurries. 2. Applied below temperature of 180â?? (356â??, BHCT) 3. Features with excellent salt tolerance up to salt-saturation, suitable for both fresh and salt water system 4. When applied, cement slurry system is stable with little free fluid. 5. Has no effect of retardation on the cement slurry and ensures fast development of compressive strength of the set cement 6. Features with good fluidity, does not lead to over-dispersing or thickening and no need to add additional dispersant. 7. Compatible well with other additives. 8. Suitable for all API classes of cement. 9. Dry mixed when applied and no water quality is required. 10. Long durability, not easily affected by damp and not prone to agglomeration 11. The following technical data and parameters are of our standard type of CG610S-D. We are capable of catering tailor-made products and services upon receipt of customersâ?? individual requirements . CEMENT SLURRY PRESCRIPTION Cement Slurry Density Recommended Dosage in Fresh Water and Moderate Temperature System Recommended Dosage in 18% Slat Water and Moderate Temperature System Recommended Dosage in 18% Salt Water and High Temperature System STANDARD PACKAGING AND STORAGE 1. Packed in 25kg bag. It can also be packed according to customerâ??s different individual demands. 2. Use within 24 months after production. When expired, lab test should be conducted to confirm the quality before use. 3. Store in ventilated, cool and dry area, avoid exposing to sun and rain. The height of stack should be less than 8 layers.
Strong dirt resistance; Easy application Rapid drying speed, 12000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity: 100 ku *solid content:53% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Full matt paint film, Excellent mildew resistance, algae resistance and health. Strong adherence performance Water resistance and breathe freely, Lasting light color, strong tarnish resistance, Outstanding hiding and coverage, smooth feeling, Easy application and rapid drying speed, 80000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity:100 ku *solid content:59% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Paint paddle Stir stick Wooden stake 12" 14" 21"
Excellent foam control. Improve wetting, leveling and flow. Resist Moisture. Impart slip and gloss. Help prevent pigment seperation. Suitable for use in industrial wood coatings, interior and exterior paints, inks and overprint varnishes.
Waterborne assist non-odour. Super dirt resistance, Water resistance and breathe freely, Non-yellowing, Outstanding hiding and adhesion, 50000 times for scrub resistance. Method Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. Mix well before painting, plus proper clean water for diluting and mix well. Stop application when temperature is below 8 celsius Proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). Application tools: brush, roller, and spray Consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 Appearance: white viscous liquid Solvent type: water-base Color: white Gloss: matt To touch: 0.5-1 hours Viscosity:100 ku Solid content:57% Voc: ín 47 g/l 1l drum; 5l drum; 18l drum
Series exterior Lifespan Feature Exterior paint series 1 2 years 1.Paint film smooth and solid 2.Good weather resistance 3.Water-resistent, alkali-resistent, scrub-resistenrt 4.Good coverage ability and economically Exterior paint series 3 3 years 1. Firm tensile tenacious, glossy 2. Anti-sunshine and anti watering 3. Strong adhesion 4. Strong coverage ability, anti-site, Exterior paint series 6 5 years 1. High glossy 2. Outstanding dirt resistance, alkali resistance, 3. Outstanding water resistance, alkali resistance, 4. Outstanding coverage ability and leveling property and easy application Exterior paint series 9 More than 8 years 1. Excellent light glossy 2. Excellent anti-dirt resistance 3. Strong weather resistance 4. Strong coverage ability and good levelling property 1l drum; 5l drum; 18l drum
Paint.
We understand the demands of crankcase lubrication; the importance of water tolerance, of long-term bearing life, and protecting against corrosion. Bio Mileager Crank Case Oils offers protection against corrosion and wear, and the same load-bearing capabilities regardless of your geographic location.
Bio Mileager Crank Case Oil Additives are 100% herbal additives which really determine its performance properties. Bio Mileager Crank Case Oil Additives extend the viscosity range of the oil, allow it to withstand high pressures and loads, handle contaminants in the crankcase, and reduce friction for improved fuel economy.
Reduced soot and coke creation in the combustor. Sustained engine power levels. Reduced coke buildup on fuel nozzle face. Extended fuel-nozzle cleaning intervals. Reduced generation of smoke and particulates.
Bio Mileager 4T Plus is premium quality multi-grade engine oil (SAE 20W40), formulated to meet the requirements of high performance 4 stroke two and three wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycles.
Bio Mileager 4T is premium quality multi-grade engine oil (SAE 20W40), formulated to meet the requirements of high performance 4 stroke two and three wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycles.
Bio Mileager Kerosene Lubricity Additive is a herbal fuel additive which forma protective layer on metal surface to prevent wear and tear. It improves the equipment life.
Bio Mileager MP3 Grease Oil Additive is a MULTI-PURPOSE GREASE MP3 of premium quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance. specifications. This grease provides maximum protection by adhering well to the lubricated bearing surfaces sealing them from dirt and abrasive contaminations
Bio Mileager WB Grease It is made from herbal , refined & filtered mineral lubricating oil and other additives. The grease is homogeneous and of fibrous texture, free from objectionable odour and visible impurities.
Bio Mileager Chasis Grease additive is made from herbal soap, refined & filtered mineral lubricating oils, suitable pacifier etc. The grease is smooth, homogeneous, free from objectionable odour and visible impurities and abrasive of deleterious particles.
