Purley Plastic Coating Suppliers and Manufacturers

Polyvinyl Chloride(PVC) PVC is called poly vinyl chloride, the main ingredients of PVC; it has the bright-colored, corrosion-resistant and durable property. It is often add some plasticizers, anti-aging agent, and additively in the process to enhance its heat resistance, toughness, scalability and so on. All kinds of PVC granules, such as rigid, soft, clear and various colors are available. They are used in extrusion, injection and so on, for PVC profile, PVC frame, pipe, seal raw material. Application Division according to application: 1.Building materials: such as PVC tubing, PVC pipes, panel and section bars. 2.Packing materials. 3.Electronic materials: such as electronic wires, cables,adhesive tapes and bolts. 4.Furniture and ecorating materials,etc. 5.Others: leatheroid, medical disposable products, antiseptic paint,etc.

Specification item value Product name POE Full name Polyolefin Elastomer Grade Injection Grade. Extrusion Grade Sample Available Package 25kgs/bag Appearance Granules Application Wire & Cable, Plastic Modifications, Composite Molding Applications MOQ 25 KG

Packaging & delivery Package Type: Export Standard Packing / as per customerâ??s need Supply Ability Supply Ability 1000 Ton/Tons per Month

Product Description & Properties PP L5E89 Resin Granule Test Method Value Unit Basic Properties Melt Flow Rate ISO 1183 3.5 g/10min Density ISO 1183 0.90 g/cm3 Mechanical Properties Tensile Strength ISO 527-2/50 34 MPa IZOD Notched Impact Strength ISO 179/1eU 32 kJ/m2 Thermal Properties Heat Deflection Temperature ISO 75-2/B 104 oC Flammability UL 94 HB

Grade- 100% Clean Packing- Compressed Density- 15~25%kg/m3 Quality- Excellent Form-� SCRAPS BALED MOQ- 10 Tons Supply Ability Supply Ability- 2000 Pack/Packs per Day

Specification  HDPE Unit Typical Value Mass density gcm 09410959 Melt flow Rate190 Centigrade 216kg g10min 10 Tensile yield strength MPa 190 Flexural modulus Mpa 965 Elongation break 400 Impact Embrittlement temperature Centigrade MAX 118 Dielectric Constant 100KHZ 232 1MHZ 231 Loss Tangent 100KHZ MAX 00001 1MHZ MAX 00001 Volume resistivity  OHMCM MIN 110 15 Description by Manufacturer High density polyethylene for nontoxic tasteless no smelly white particles melting point is about 130 C relative density of 0941 0960 It has good heat resistance and cold resistance chemical stability but also has high rigidity and toughness good mechanical strength Dielectric properties environmental stress cracking resistance sex also is good Application  HDPE high density PE is used in products and packaging such as plastic bags milk jugs detergent bottles margarine tubs garbage containers water pipes woven bag raincoat polyethylene monofilament woven yarn etc

GPPS The English name for polystyrene is Polystyrene, abbreviated as PS. PS is a thermoplastic non crystalline resin that is polymerized from styrene monomers and can be synthesized through various synthetic methods. In industry, bulk polymerization and suspension polymerization are mainly used. PS is mainly divided into general grade polystyrene (GPPS, commonly known as transparent benzene), impact grade polystyrene (HIPS, commonly known as modified benzene), and foam grade polystyrene (EPS). General grade polystyrene is a thermoplastic resin that is colorless, odorless, odorless, and glossy, transparent, bead like or granular solid.General grade polystyrene is a thermoplastic resin that is colorless, odorless, odorless, and glossy, transparent, bead like or granular solid. It is soluble in Aromatic hydrocarbon, chlorinated hydrocarbons, aliphatic ketones and esters, but can only swell in acetone. It can withstand the action of certain mineral oils, organic acids, alkalis, salts, lower alcohols, and their aqueous solutions. Low water absorption, able to maintain its mechanical properties and dimensional stability in humid environments. The optical performance is second only to acrylic resin. Excellent electrical performance, high volume and surface resistivity, and unaffected by temperature and humidity changes, as well as corona discharge. The radiation resistance is also very good. Its main drawbacks are brittle and easy to crack, low impact strength, poor heat resistance, and inability to withstand boiling water. It can only be used at lower temperatures and loads. Poor sunlight resistance and flammability. When burning, it emits black smoke and has a special odor.

Packaging Details 25 kg/bag Standard package: Inner (Plastic film) and outer: (Paper bag or woven bag). Or we can make it per customers requirement. Port   Shanghai

Polyethylene terephthalate (PET), chemical formula (C10H8O4)n, is made from dimethyl terephthalate and glycol transesterification or esterification of terephthalate and glycol to synthesize dihydroxyethyl terephthalate, and then polycondensation reaction. It is a crystal type saturated polyester, which is a milky white or light yellow, highly crystalline polymer with smooth and glossy surface. It is a common resin in life, which can be divided into APET, RPET and PETG. It has excellent physical and mechanical properties in a wide range of temperatures, up to 120â??, and excellent electrical insulation. Even at high temperature and high frequency, its electrical properties are still good, but it has poor corona resistance, creep resistance, fatigue resistance, friction resistance and dimensional stability. Advantages: 1. Good mechanical properties, impact strength is 3~5 times that of other films, good folding resistance. 2 oil resistance, fat resistance, dilute acid resistance, dilute alkali resistance, resistance to most solvents. 3. Can be used in the temperature range of 55-60â?? for a long time, short-term use can resist 65â?? high temperature, can resist -70â?? low temperature, and high and low temperature has little impact on its mechanical properties. 4. Low permeability of gas and water vapor, and excellent resistance to gas, water, oil and odor. 5. High transparency, can block UV, good luster. 6. Non-toxic, tasteless, good health and safety, can be directly used for food packaging.

Physical property Standard Test Condition Units Values Specific Gravity GB/T 1033 g/cm3 0.920 Melt Flow Rate GB/T 3682 g/10min 2 Mechanical Properties Standard Test Condition Units Values Tensile Strength at Yield GB/T 1040 Mpa 10 Tensile Strength at Break GB/T 1040 Mpa 16 Elongation at Break GB/T 1040 % 8 Haze GB/T 2410 % 14 Fish Eyes (pcs/1520 cm 2 ) 0.8mm 0.4mm 2 10 LLDPE Low density polyethylene, also known as high pressure polyethylene (LDPE), is the lightest variety of polyethylene resin, is milky, tasteless, odorless, non-toxic, non-glossy surface waxy particles. It has good softness, extensibility, electrical insulation, transparency, workability and certain air permeability. Its chemical stability performance is good, alkali resistance, resistance to general organic solvents. Application range of low density polyethylene: suitable for seasoning, pastry, sugar, preserves, biscuits, milk powder, tea, fish floss and other food packaging. Tablets, powders and other medicine packaging, shirts, clothing, knitted cotton products and chemical fiber products packaging. Washing powder,detergent, cosmetics and other daily chemical products packaging. Because of the poor mechanical properties of single-layer PE film, it is usually used as the inner layer of composite packaging bag, that is, multilayer composite film heat-sealing substrate.

Product Description & Properties PP BE961MO Resin Granule Test Method Value Unit Basic Properties Melt Flow Rate ISO 1133 12 g/10min Mechanical Properties Flexural Modulus ISO 527-2  1250 MPa IZOD Impact, Notched,23 ISO 180 14 KJ/m2 Thermal Properties Heat Deflection Temperature ISO 75 92 C  Application Turnover boxes, trays, boxes, barrels, suitcases

Properties: Polystyrene (PS) plastic is a naturally transparent thermoplastic that is available as both a typical solid plastic as well in the form of a rigid foam material. PS plastic is commonly used in a variety of consumer product applications and is also particularly useful for commercial packaging. Polystyrene (PS) for Prototype Development on CNC Machines and 3D Printers: Polystyrene is available in sheet stock, rod stock, and in various shapes. It is a great candidate for subtractive machining processes on a CNC machine. Colors are usually limited to clear, white, and black although colors can be added and it is an excellent candidate for external painting. Polystyrene (PS) for� Injection Molding: General Purpose Polystyrene (GPPS) and High Impact Polystyrene (HIPS) are probably the most commonly used PS resins for injection molding. GPPS is clear, but brittle (think of a CD jewel case) while HIPS is opaque and much less brittle. TYPE BRAND CODE MFR,g/l0min USAGE GPPS 525 1.8-2.8 Disposable knife,fork and cupã??Audio/video cassette housing,CD jewel box,toys,medical container. 168 1.8-2.8 535 6 123P 8 152P 3.5 N1841H/N1841 10 525B 9 500N/500NT 5 HIPS 825 4.5 Home appliances,toys, television& hi-fi housing,video cassette housing,food container,yoghurt port 622P 4.5 SR600 3.5 ABS 757 20 Automobile instrument panel, body panel, interior decoration board, steering wheel, sound insulation board, door lock, bumper, ventilation pipe, refrigerator, TV, washing machine, air conditioner, computer 417 20 0215A 20 0215H 20 750A 50 750ASQ 30 150 2 151 18-24 275 10

General level of polystyrene and can be used for daily necessities, electrical, instrument shell, toys, lamps and lanterns, household appliances, stationery, cosmetics containers, indoor and outdoor decoration, fruit tray, optical components, such as prism, lens, lens window glass and molding, headlights, telecom accessories, electrical frequency capacitor films, containers, such as high-frequency insulation materials, TV guide, chemical containers, etc

Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation)

Place of Origin: UK Model Number: V30G,HP500N,H9018,etc. Appearance PP Clear Pellets MFR 0.5-100 Packing 25kg/bag Grade Injection molding grade Color: Natural White Identified uses for Injection

Product name Primary PVC particles Colour Blue Shape cylinder particles Application Injection molding, rubber shoes, sealing rings, etc Characteristic Impact resistance, high fluidity, high gloss and good toughness Density 1.47�±0.3 Hardness 68�±5

Product name:hd polyethylene lldpe linear low density polyethylene ldpe lldpe granules injection grade PP/PVC/ABS/PE Appearance:Linear low density polyethylene is a non-toxic, tasteless, odorless milky white particle with a density of 0.918~0.935g/cm3. Application:At present, lldpe plastic is mainly used in the field of film and packaging, through extrusion and blow molding process to produce plastic bags, garbage bags, industrial lining, agricultural film, protective film, etc., but also through injection molding and rotoplastic production process to make toys, refrigerated appliances, chemical reaction tanks, waste storage boxes and so on.

Product description INEOS produces highly versatile Polypropylene Impact Copolymer grades for extrusion, thermoforming, injection and blow molding applications. The grade portfolio covers a melt flow (MFI) range from fractional melts to 100 (g/10 min. at 2.16kg). The proprietary Innoveneâ?¢ P gas phase production process combined with state-of-the-art catalysts allows for the creation of an innovative PP portfolio

POE plastic is a thermoplastic elastomer in situ polymerization of ethylene and octene using metallocene catalyst. Its characteristics are as follows : (1) the soft crimped chain structure of octene and the crystalline ethylene chain as physical cross-linking point, which makes it both excellent toughness and good processability. (2) There is no unsaturated double bond in the molecular structure of POE plastic, which has excellent aging resistance. (3)POE plastic has narrow molecular weight distribution and good compatibility with polyolefin. (4) Good fluidity can improve the dispersion effect of filler, but also improve the strength of fusion mark products.