- Stainless steel profile bars (round, hexagonal, square, flat bar) grade 304/304L, 316/316L/ 316Ti, 410, 420, 431,... - Stainless steel sheets grade 304 (No.4, No.8, hairline, vibration, PVD, etched, embossed) - Stainless steel spring strips & wires, wire mesh (woven/ crimped/ welded/), TIG rods & MIG wires, and pure zinc wires.
We are specialized in supplying various special steel, alloy steel, spring flat bar, stainless steel to overseas as Vietnam, Singapore, Malaysia, Korea, Thailand, Hong Kong..& others southeast in Asia 0084986606935 Supply a lot of steel
Capacity: 0.7L/1L; Heat retention after 6h >= 78 C; Body: Stainless steel material, customized patterns and colors; Lid: PP Plastic material, just press the button to get water; Bottom: PP Plastic material, skid resistance, easy to disassemble; Mouth: Nice and even water flow, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Gasket: Silicone material, resist leakage; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/2L/5L; Heat retention after 6h >= 78 C; Body: Stainless steel/Steel material, customized patterns and colors; Lid: Polypropylene material, lever pump type; Bottom: Polypropylene material, skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/2L/2,5L; Body: Stainless steel material, customized patterns and colors; Lid: Polypropylene material, push button type; Bottom: Polypropylene material, skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/1,3L/1,6L; Heat retention after 6h >= 78 C; Body: Stainless steel material, customized patterns; Lid: Polypropylene material, loosen to get water without disassembling; Bottom: Skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L/1,3L/1,6L; Heat retention after 6h >= 78 C; Body: Stainless steel material, customized patterns and colors; Lid: Polypropylene material, just press the button to get water; Bottom: Polypropylene material, skid resistance, easy to disassemble; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: High quality, produced with Japanese technology, excellent heat preservation; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Stainless steel.
Steel billet, deformed steel bar, hot steel coil, steel sheet.
Stainless steel plate, sheet, bar.
Steel billets International standard Container or bulk standard
Aluminum panel, HDPE tube, inox pipe, bar, safe lighter, smart TV, rice, cracker.
Capacity: 0.36L/0.5L; Heat retention after 6h >= 78 �°C; Body: Double-walled 304 & 201 stainless steel for heat preservation, customized patterns and colors; Lid: 304 stainless steel material, just twist the lid to get water, temperature display (optional); Tea strainer: 304 stainless steel material, removable; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 0.4L/0.45L/0.6L; Heat retention after 6h >= 78 �°C; Body: Double wall 201 & 304 stainless steel for heat preservation, customized patterns and colors; Lid: 304 stainless steel material, just twist the lid to get water; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Power: 1500W; Capacity: 1.7L; Body: Double wall insulated design with 304 stainless steel interior plus a PP exterior for better heat retention rate, customized patterns and colors; Handle: PP Plastic material, stay-cool, integrated with lid release button; Base: PP material, 360-degree swivel; Cord-free pouring; Auto shut-off feature and boil-dry protection technology; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Stainless steel products: stainless steel bars (round, square, v shaped, flat bars,...), stainless steel sheets (etched, color coated, hl, no.8, no.4,...), stainless steel wire, welding rods(tig) and wire (mig).
Stainless steel welded polished tube and industrial pipe electric water heater kitchen sink solar water heater solar panel water tank (plastic and sus).
Steel, alloy steel, spring flat bar, stainless steel.
As we have got our own factories for cutting and slitting material with the most modern technology so we can supply any specified & non-standard dimension (smallest width: 12mm up to 1524mm). We also can provide all kind of special precision stainless steel sheets/strips/coils as a complement material for electronic application like 304, 301 ... Full hard, 3/4h, 1/2h... And other material like stainless steel pipes/tubes (welded & seamless), stainless steel round bars for heavy industrial purposes. 1. Hot rolled stainless steel - Series 200, 300 and 400 - Standard: astm/jis - Quality: prime - Surface: no1 - Thickness (mm): 3.0 -30 - Width (mm): 1219, 1500, 1524 - Length(mm): coil and plates 2. Cold rolled stainless steel - Series 200, 300 and 400 - Standard: astm/jis - Quality: prime - Surface: 2b, ba, no.4, hl, no.8… - Thickness (mm): 0.2 ~6 - Width (mm): 1000mm, 1219mm, 1500mm, 1524mm - Length(mm): coil and plates 3. Cutting service & slitting strips - Material: inox 201, 304, 316, 430, … and other steel alloy (cr, eg, gi, …) - Thichness(mm): 0.3 -3.2 - Width(mm): up to 1560 - Weight: 20 tons (max) - Inner dimension(mm): 508, 610 - Outside dimension(mm): 2000 (max)
1. PRODUCT OVERVIEW VHR steel strip-seal joint made by Vinh Hung Investment and Production Co., Ltd (Vinh Hung IP) comprises of two steel rails with anchor bars connected to embedded bars in the pier cap of headwall of abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrink mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joint identified by the cross section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2. PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movements if any. Simple in design and installation, high load capacity and durability. Designed suitably for flush curb and central reverse. Totally water-tight. To ensure the long-lasting durability, VHR steel strip expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. MATERIAL PARAMETERS 1. PROPERTIES OF METAL ELEMENTS ITEMS Tensile strength, min Yield strength, min Elongation, min NO. 1 2 3 REQUIREMENTS 450 345 23 UNIT MPa MPa % STANDARD ASTM A709M PROPERTIES OF RUBBER SEAL UNIT REQUIREMENTS Point Mpa 1 2 3 4 5 Hardness Tensile strength, min Ozone resistance, content of ozone in the air 100pphm, 20% deformed at 40o C x 70h Elongation at break, min Hot air aging test in 70 hours at 100o C Tensile strength change, max Elongation change, max Hardness change 65 ± 5 7 No crack 250 - 20 - 40 0 - 15 STANDARD ASTM D2240 ASTM D412 ASTM D1149 ASTM D412 ASTM D573 ASTM D573 ASTM D573 ASTM D573 Installation of joints is critical to ensure the lifespan of the expansion joint and smooth traffic. Careful preparation of machinery, equipment, and highly specialized human resources is required for the installation of high quality expansion joints. The installation method shall be strictly followed to guarantee the actual performance of the product in service. 1. After finishing pavement, cut and clean he trend, adjust embedded bars, laym reinforcement bars on site 2 . Fix the deformed bars, install the fabricated joints, add distribution bars, anchoring bars to embedded bars. 3. Cure concrete, install rubber seal, allow traffic when concrete 4. Install formworks and pour non-shrink mortar or high-strength concrete to transition section, check the leveling of surface.
