Tgs p/n cfa450/455w (lt450/455w) Dim.(mm) 11.0x8.0x7.0 Frequency 450khz/455khz Main features : 6db bandwidth: G¦2khz to G¦15khz Attenuation: 40 ~ 60db min Insertion loss: 6db max
Item name:ceramic filter Size:lt455dw series Type:dip Center frequency:455khz Dimension:11.0*7.0*8.0mm Packing:dip Dimension:11.0*7.0*8.0mm
Product Introduction For TV/ VCR Part Number Center Frequency(fn) (MHz) 3dB Bandwidth(KHz)min 20dB Bandwidth(KHz)max Insertion Loss(dB)max Spurious Attenuation(dB)min LT4.5MB 4.5 fn±60 530 6 20(4.5+0.8MHz) 20(4.5-1.0MHz) LT5.5MB 5.5 fn±75 550 6 25(5.5±1.0MHz) LT6.0MB 6.0 fn±80 600 6 25(6.0±1.0MHz) LT6.5MB 6.5 fn±80 630 6 25(6.5+1.0MHz) 30(6.5-1.0MHz) Low Spurious In Picture Band Type Part Number CenteFrequency(fn(MHz) 3dBandwidth(KHz)min 20dBandwidth(KHz)max InsertioLoss(dB)max SpuriouAttenuation(dB)min LTSH4.5MCB 4.5 fn±60 600 6 30(0-fn) LTSH5.5MCB 5.5 fn±60 600 6 30(0-fn) LTSH6.0MCB 6.0 fn±60 600 6 30(0-fn) LTSH6.5MCB 6.5 fn±70 650 6 30(0-fn) LTSH4.5MDB 4.5 fn±70 750 6 30(0-fn) LTSH5.5MDB 5.5 fn±80 750 6 30(0-fn) LTSH6.0MDB 6.0 fn±80 750 6 30(0-fn) LTSH6.5MDB 6.5 fn±80 800 6 30(0-fn) High Selectivity Series Part Number CenteFrequency(fn(MHz) 3dBandwidth(KHz)min 20dBandwidth(KHz)max InsertioLoss(dB)max SpuriouAttenuation(dB)min LTT5.5MA 5.5 fn±50 350 9 50(5.5±1.0MHz) LTT5.74MA 5.74 fn±50 350 9 50(5.74±1.0MHz) LTT6.0MA 6.0 fn±50 400 9 50(6.0±1.0MHz) LTT6.5MA 6.5 fn±50 400 9 50(6.5±1.0MHz)
Operating Principle By utilizing the production technology of our patent, the filtering plate consisting of two pieces of cavity-structures which is produced mainly by using corundum-based material. The process include raw-material classification, cleaning & selecting, mixing, high-accuracy molding through die stamping, stage-wise high-temperature roasting, repetitious painting of function layer, cleaning & choosing, finalizing gluing, performance testing, packing and placing in storehouse. Repetitious roasting and layer-after-layer painting are adopted. Thus, the arrangement of pores (interior is big, exterior is small) is clear; The resistance at restoring of filtering plate's function is small; The cleaning of filtering plate is easy; The surface layer is of high strength and wear-resistant. The two pieces of cavity-structures are glued together using epoxy glue imported. The gluing is of high strength and is corrosion-resistant & wear-resistant. Features and Applications The ceramic filtering plates produced by our plant have been proved as successful in many beneficiation plants treating ores of copper, lead, zinc, iron, silver, sulfur, gold etc. The filtering plates are of high strength, easy to be cleaned for restoring of plate function. The maximum pressure for reverse cleaning reaches 0.3MPa that increases the performance of reverse cleaning & combined cleaning and raises remarkably the operation indexes of the filter. The service life of the filter exceeds 2 years that saves the investment & operation cost of customer.
Operating principle Driven by the main shaft, the filtering plate rotates to the direction of scraper. Under effect of vacuum system (vacuum pump, filtrate tank, distributor and relevant pipes), the filtering plate below slurry level absorbs the slurry while the filtering plate from slurry level to scraper makes the material (absorbed on it) dry. The filtrate goes into filtrate tank where from it is drained through discharge system (filtrate pump and relevant pipes). When the filtering plate reaches the position of scraper, the cake is taken off by scraper and then given through discharge chute onto conveying belt. After discharge of material, the filtering plate is cleaned in the way of reverse flowing (cleaning takes place once after each circle of rotation). So a few of residue caused by clearance between filtering plate and scraper is cleaned out, and the function of filtering plate is restored during operation. After certain time (normally, 7 hours), it is necessary to clean the filtering plate by means of detergent (normally, it is nitric acid depending on characteristics of material) and ultrasonic. So the materials & foreign matters stopped in pores of filtering plate or absorbed on surface of filtering plate are cleaned out, and the function of filtering plate is restored during operation. The ceramic filter adopts PLC full-automatic control system. Both full-automatic operation and manual operation are possible to provide flexibility & convenience. Features and Applications Compared with traditional filters, it is featured in energy saving, high efficency, low production cost, high automation level, low power consumption, low moisture of filter cake. More importantly, the low suspended solids in filterate enables the ceramic filter easily meet the discharge standards, and customers can use it as circulation water without discharge it outside. It is extensively used for solid liquid separation in such industries as ore beneficiation, metallurgy, chemicals, paper making, coal, environmental protection and so on.
Item name:ceramic filter Size:LTC455DWSeries Type:SMD Frequency:450,455KHz Dimension:11.6*7.5*5.5mm Packing:SMD Dimension:11.6*7.5*5.5mm
Ceramic filter slice To metallurgy mainly, cast the trade, this product is more heavily than the surface area, mechanical intensity high, heat-resisting characteristic that assaults , can be strained and get rid of the metal and liquid impurity in casting the products, reduce the air vent of castings, raise the quality of casting, reduce and cast the cost, raise labour productivity. Main technical indicator (1)the utilization ratio increasing 5-10% (2)casting tired intensity increases by 15.5% (4)spend 1300 fire-resistantly
The ceramic filter material sold by ningxia huiheng activated carbon sales co. Ltd. Is refined by a series of production processes. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, mainly used for water treatmentï¼?ningxia biyuan activated carbon co., ltd. Is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
With excellent thermal shock resistance, high strength, high hole fraction and specific surface area, unique cell designs and advanced material,Extruded Ceramic Filters have a special function of attracting and capturing molten metal impurities on the cell internal walls. Extruded Ceramic Filters are available in a range of cell sizes for Foundry & Casting applications. A wide choice of filter dimensions is also available for any gating system requirem Characteristics 1.Improved casting quality 2.Improved machinability of castings 3.Improved machine tool life Materials Cordierite, Mullite, Cordierite/Mullite, Zirconia Application Grey iron, Ductile iron, Aluminum Alloy, Stainless steel.
1.Quick Details 1)Place of Origin:Fujian, China (Mainland) 2)Type:Ceramic Plates 3)Application:Industrial Ceramic 4)Material:Alumina Ceramic 5)Model Number:INCAPOROUS 6)Brand Name:INNOVACERA 7)Color:Grey 8)Product name:Porous Ceramic Vacuum Chuck 9)Shape:Square/roundness 10)Size:Size Customized 11)Compressive strength:>0.5Mpa 12)Density:2.2-2.3g/cm3 13)Working temperature:1800 14)Vickers Hardness:11.5 15)Flexural strength:358
Vacuum ceramic filter is a new type of solid-liquid separation machine which is featured in energy-saving, high efficiency, low production cost, high automation level, smooth operation, low power consumption, low moisture of filter cake, low suspended solid and appears in the 1980s. It¡¯s extensively used for solid-liquid separation in such industries as ore beneficiation, metallurgy, petro-chemicals, paper making, coal, environmental protection and so on. Working principle: under the effects of pressure difference, as the slurry penetrates filter media, particles are blocked at the surface of filter media and filter cake is formed while liquid goes through the media and drained away so as to separate solid from liquid. Vacuum ceramic disc filters are the solid-liquid separation equipment, used to dewater mineral concentrates and Tba
Ceramic foam filters Arffil ceramic foam filters are characterized as high permeation rate, good strength and thermal shock resistance, stable quality and without loosing impurity in high temperature either in big size or small ppi products. Advantages compared with traditional filtering materials: Thermal and chemical stability in high temperatureücavoiding the chemical reaction with the filtered molten metal. High porosity and good mechanical strength in elevate temperature due to its pure ceramic composite. Full open cell without loosing ceramic particles or powders (snowing) during filtrating. Low head loss, easy operation, energy save. Make metal flow reposeful and avoid the sputtering and backset, this increases the surface quality of the cast, prevent the pore disfigurement and finally lower down the waster rate. Box quantity depends on the filters's dimensions
Ceramic capillary filter
Ceramic foam filter Ceramic foam filter is developed as a new type molten metal filter to decrease casting flaw in recent years, designed for filtering impurities from liquid metals. With the distributing pores net structure, they are able to increase the surface areas, absorb the sinter, the liquid metal becomes more pure, waster quality problems such as sand pore and air pore are much less, and the cast quality becomes much better. Jintai ceramic foam filter: Material including al2o3, sic, zro2. Shape in square, round, cylinder. Pore size: 8~60ppi Special size is available upon request. Cartons on pallets
Ceramic foam filter (jintai) Ceramic foam filter is developed as a new type molten metal filter to decrease casting flaw in recent years, designed for filtering impurities from liquid metals. With the Distributing pores net structure, they are able to increase the surface areas, absorb the sinter, the liquid metal becomes more pure, waster quality problems such as sand pore And air pore are much less, and the cast quality becomes much better. Jintai ceramic foam filter: Material including al2o3, sic, zro2. Shape in square, round, cylinder. Pore size: 8~60ppi Special size is available upon request. Jintai features: high quality products, competitive price, prompt delivery and professional services. Cartons on pallets
Ceramic foam filter 1. Alumina work at 1100 centigrade degree, apply for aluminium foundry. 2. Zirconia work at 1700 centigrade degree, apply for steel, stainless steel foundry. 3. Silicon carbide work at 1500 centigrade degree, apply for iron, copper, copper alloy foundry. 4. Fused zriconia-alumina work at 1600 centigrade degree, apply for some steel which have lower tem. Requirement. Ceramic foam filter is been made by specific procedures and have peculiar bone-frame holes just like the shape of foam(called three-dimensional connected channel) and myriad eyelets which only been found in big times microscope. Compare to similar ones, our products have many advantages as below: Stable chemical composition Excellent strength Resistant to high temperature Calm down of the turbulent flow of metal nicely Big m2/m3 Superior dimensional tolerances: +0/-2.5 Suggestions: A. Control the melting point satisfactorily. Especially high temperature will destroy it's function. B. Suitable ppi for different casting materials. C. Use the maximum temperature as soon as possibly. D. The pouring highness don't exceed 20cm commonly, and metal liquid don't touch the filtration directly. Standard export packing
Ceramic honeycomb filter Materail: mullite. Mullite ceramic honeycomb filter have straight holes, more strongth compare to ceramic foam filter. Apply to iron, copper, copper, steel, stainless steel foundry. Function: 1. Can remove big oxide, 2. Calm down turbulent laminar flow, 3. Absorb smaller impurities with it's myriad eyelets whicn only been found in microscope Specification: Al2o3: 50% Hole type: square/round/triangle Millihole: 2--3 um Coefficient of thermal expansion: less than 4.0 Refractoriness: 1700 dgree celsius Bending strength at normal temperature Formal size: 50*50*12.5mm, 50*75*12.5mm, 100*75*12.5mm. Size can be changed according your requirements. Standard export packing
When cuts ceramic tile, it will add water while cutting. The main functions of adding water are: 1. Prevent the ceramic tile from being too high and crack; 2. Reduce the temperature of the saw blade and prolong the service life; 3. Reduce the dust pollution. However, this produces a mixture of ceramic tile powder and water, Ceramic filters can efficiently separate materials and water from sewage. The advantages of ceramic filters are as follows: First, the power consumption is low, the power is only 12-20KW per hour, and the energy consumption is low. Second, the filtered material is dry, the moisture content is about 10%, and the product has no loss, reaches 100% recovery. Third, fully automatic control, can achieve one person to guard multiple devices or directly access the control center to achieve unattended. Fourth, the liquid produced by the equipment is clear as pure water, and can be used directly as a production water source, which can achieve 90% water source recovery, greatly reducing the water consumption of the factory. #DiscVacuumFilter #DiscFilter #MiningSeparationFilter #MiningEquipment #MiningFilter #CeramicDiscVacuumFilter
Silicon Carbide Ceramic Foam Filter Silicon Carbide Ceramic Foam Filter is mainly made of high purity fine silicon carbide powder, which is suitable for filtrating Ductile, Grey Iron, Vermicular Cast Iron and some Iron Alloy and also for filtrating non-ferrous alloy, such as Cooper alloy and Aluminum alloy. It can remove impurities efficiently, and make metal filling steady in mould. It can also reduce air flow and casting impact in mould, and decrease pin hole, sand hole defeats to increase casting quality and product rate. These series of products are newest products, which are produced through special material formula and latest advanced technology. Compared with normal ceramic foam filters, these new series products can be used at a higher temperature, which have higher strength at room temperature and high temperature. The physical property of this special material enables our filters to have a better thermal shock resistance. They are suitable for harsh casting condition, such as placing on the bottom of vertical runner and casting at high temperature.
The ceramic filtering plates produced by our plant have been proved as successful in many beneficiation plants treating ores of copper, lead, zinc, iron, silver, sulfur, gold etc. The filtering plates are of high strength, easy to be cleaned for restoring of function. The maximum pressure for reverse cleaning reaches 0.3mpa, the level that increases the performance of back cleaning & combined cleaning and raises remarkably the operation indexes of the filter. The service life of the filter exceeds 1 year that saves the investment & operational cost of customer. Features: 1. High strength, abrasion and corrosion resistant and long service life 2. Size of micro pore is small (normally with diameter of 1.0um), strong capillary effect. Low power and energy consumption as filtrates drawn into micro pore automatically. 3. High filtration pressure drop (vacuum degree can reach-0.098mpa) and low moisture of filter cake. 4. Filtrate is clear and transparent with low suspended substances (21ppm), filtrates can be used as industrial circulation water. Tba
