All steel sections, such as flat steel section, rod and angles .
Cast iron like manhole covers and frames, pumps.
Galvanized steel coils, hot roll coils, cold roll coils, angles and many other steel products.
Wall fixings like frame fixings and hammer fixings.
Available finishes include the following: Unpolished- polished- polished, resin filled- honed- flamed- sand blasted- Brushed- bush hammered-antique- natural cleft- acid washing. 1-Slabs: The slabs are either put on cavolettos in 20 feet container. Or they are put on open-top containers on wooden “shape a” Stands. They are separated individually by plastic sheets to protect Against scratches. Also each 10 stabs are grouped and framed by Wooden pallet. 2- Tiles: Tiles are loaded in wooden crates filled foam for better protection. 3-Blocks: General cargo. Open top container.
Abrasion resistance hardness (astm c 241 / c 1353) : 38. 80 Flexural strength Stone name: terista Abrasion resistance hardness (astm c 241 / c 1353) : 38. 80 Flexural strength psi (mpa. )astm c 880: 1900 Modulus of rupture mpa. (astm v 170) : 1900 Absorption by weight% (astm c 97) : 0. 890% Density (kg / m3) (astm c 97) : 2028. 1-slabs The slabs are either put on steel cavolettos in 20 feet container, or they are put on open-top containers on iron "shape a' stands. They are separated individually by plastic sheets to protect against scratches. Also each 15stabs are grouped and framed by wooden pallet. 2-tiles Tiles are loaded in wooden crates filled foam for better protection.
Specification of galala marble: Description: stone characteristics-- minimal requirements-- degree Abrasion resistance hardness (astm c241/c1353) min ha b, c, d 10 --34.8ha Flexural strenghtmpa. (astm c880) min 1000 psi --1300psi Modulus of rupture mpa (astm c99) min 1000 psi --1800psi Compressive strenght map (astm c170) min 7500 psi --18300psi Absorption by weight % (astm c97) max%0.20-- 0.12% Density(kg/m3)(astm c97) min kg/m3 2305-- 2627. 1-slabs The slabs are either put on steel cavolettos in 20 feet container, or they are put on open-top containers on iron "shape a' stands. They are separated individually by plastic sheets to protect against scratches. Also each 15stabs are grouped and framed by wooden pallet. 2-tiles Tiles are loaded in wooden crates filled foam for better protection.
Sunny average 1.42% 1700 psi material standard astm c97 astm c99 modulus of rupture astm c170 compressive strength astm c 241 abrasion resistance astm c 880 flexural strength astm c97 test absorption (3) dry (3) dry (5) dry (3) dry (5) bulk specific gravity(3) 10300 psi 40.1 ha 1200 psi 2581. 1-slabs The slabs are either put on steel cavolettos in 20 feet container, or they are put on open-top containers on iron "shape a' stands. They are separated individually by plastic sheets to protect against scratches. Also each 15stabs are grouped and framed by wooden pallet. 2-tiles Tiles are loaded in wooden crates filled foam for better protection.
There are three types: Solo shelving: Cost effective fully adjustable single skin upright shelving system. Solo uprights are manufactured from one-piece steel and feature a delta front edge with no sharp edges, so eliminating snagging when loading shelves. Duo shelving: Duo shelving with its double skin allows the full shelf width to be used, with clear unimpeded access for easy insertion and removal of files. Duo shelving satisfies the common These slim profile uprights and shelves are aesthetically pleasing making Duo shelving ideal for today’s modern office and commercial environment. Mono shelving System: Cost effective fully adjustable shelving system. Mono uprights are open with horizontally braced frame and feature a smooth front edge with no sharp edges, so eliminating snagging when loading shelves.
Test results perpendicular StandardTestAverageTestAverage Astm c 97Absorption (3)0.2 %Bulk specific gravity (3)2 751 Astm c 99 modulus of ruptureDry (3)1 800 psi Astm c 170 compressive strengthDry (5)20 300 psi Astm c 241 abrasion resistanceDry (3)34.5ha Astm c 880 flexural strengthDry (5)1 900 psi •Astm c 97-96: standard test method for absorption and bulk specific gravity of dimensional stone. •Astm c 99-87: standard test method for modulus of rupture of dimensional stone. •Astm c 170-90: standard test method for compressive strength of dimensional stone. •Astm c 241-90 (r97): standard test method for abrasion resistance of stone subjected to foot traffic. •Astm c 880-98: standard test method for flexural strength of dimensional stone. 1-slabs The slabs are either put on steel cavolettos in 20 feet container, or they are put on open-top containers on iron "shape a' stands. They are separated individually by plastic sheets to protect against scratches. Also each 15stabs are grouped and framed by wooden pallet. 2-tiles Tiles are loaded in wooden crates filled foam for better protection.
* Helical wire diameter : 1.30mm - 1.50mm. * Coils per m2 : 100-225 Units. *Bonnell spring end ring : 62mm - 95mm. *Bonnell spring wire diameter 1.80mm - 2.40mm. *Bonnell spring turns : 4-7 turns. *Bonnell spring height :70-210mm. *Frame :round wire 4.5 - 5.00mm. *Packing : press packed ( with frame, 15-25 unit per pallet pack ) or roll packed ( without frame, 5 - 15 unit per roll )
1 Lined with high quality sponge covered with fabric 2 Solid iron chassis, nickel-plated,chrome-Double disc thickness, fitted with your store side of the same material Details Solid iron chassis and legs, nickel and chrome plated frame is made of wood,
Orange segment Our company is located at somewhere in Egypt where a huge plant was established mainly for producing Canned Food. Our factory is an extended project for our main industry which is growing, sorting, packing fresh produce citrus products to serve the international food and beverage market. Our products are distributed worldwide and always in great demand. Therefore, we decided to utilize our experience to build a huge and splendid factory; very well-organized to produce safe and hygienic food to serve all the international food markets. Our factory is high-tech project where the latest machinery equipments were implemented and very strict system was applied. Our factory infrastructure and buildings designs were established according to FDA regulations and the food processing too. All our strict regulations were to secure producing safe food as we secure: No human interference in the production phase; the product is untouchable until it's packed in the can. The utmost cleanness of all workers and staff working in the plant. There are firm rules for entrance and exit for ensuring the cleanness. All workers must take shower, wear special clothes, change their shoesaetc. The building is tightly closed for not communicating with the outer atmosphere even the fresh air is being filtered. The production phases implemented are very unique to get also unique products. it takes many pages if I'd like to explain what exactly happening. However, if you are interested, I can send it separately. Products Development: Due to our past experience in citrus production and as we have our own farms where our products are cultivated very carefully, we are able to get high-quality products to be our raw materials. Also our pack house enables us to wash and grade the products to get different segments sizes. We are currently producing Orange Segment, Grapefruit Segment which is ready for consumption. We are working on developing new types of fruits; i.e. peach, apricot, strawberryaetc. We are aiming at finding reliable and professional partner who is able to recognize how much strenuous efforts are being exerted to get such wonderful product to work by him and support him with no limits to build our brand in the market to achieve the market growth for both our company and the partner company and guarantee mutual benefits. If you work on such kinds of canned food, I will be very glad to receive your idea about the market and what are your market requirements and to develop a frame of dealing by which we reach our desired success. Looking forward to building long-term relationship. A2:540gr A5:1250gr A10:3000gr
Grape Our company is located at somewhere in Egypt where a huge plant was established mainly for producing Canned Food. Our factory is an extended project for our main industry which is growing, sorting, packing fresh produce citrus products to serve the international food and beverage market. Our products are distributed worldwide and always in great demand. Therefore, we decided to utilize our experience to build a huge and splendid factory; very well-organized to produce safe and hygienic food to serve all the international food markets. Our factory is high-tech project where the latest machinery equipments were implemented and very strict system was applied. Our factory infrastructure and buildings designs were established according to FDA regulations and the food processing too. All our strict regulations were to secure producing safe food as we secure: No human interference in the production phase; the product is untouchable until it's packed in the can. The utmost cleanness of all workers and staff working in the plant. There are firm rules for entrance and exit for ensuring the cleanness. All workers must take shower, wear special clothes, change their shoesaetc. The building is tightly closed for not communicating with the outer atmosphere even the fresh air is being filtered. The production phases implemented are very unique to get also unique products. it takes many pages if I'd like to explain what exactly happening. However, if you are interested, I can send it separately. Products Development: Due to our past experience in citrus production and as we have our own farms where our products are cultivated very carefully, we are able to get high-quality products to be our raw materials. Also our pack house enables us to wash and grade the products to get different segments sizes. We are currently producing Orange Segment, Grapefruit Segment which is ready for consumption. We are working on developing new types of fruits; i.e. peach, apricot, strawberryaetc. We are aiming at finding reliable and professional partner who is able to recognize how much strenuous efforts are being exerted to get such wonderful product to work by him and support him with no limits to build our brand in the market to achieve the market growth for both our company and the partner company and guarantee mutual benefits. If you work on such kinds of canned food, I will be very glad to receive your idea about the market and what are your market requirements and to develop a frame of dealing by which we reach our desired success. A2: 540gr A5:1250gr A10: 3000gr
CRYSTAL-TILE for wall decoration, floor, furniture and pretty much anything of your interiors could be glamorized with the magic of crystal. CRYSTAL-GIFTS, Handmade Gift, Wedding, Bridal Shower, Birthday, Home accessories (such as Candle Holders, Fruits, Floral, Clocks, Clocks Frame, various Pharaonic shapes and various Heritagesâ?¦ etc.), Stationeries (Pens, Pen Holders, Desktop accessoriesâ?¦ etc.), Figurines (Birds, Bears, Animals, Boats, Vehicles, Sea Kingdom, Musical instruments, Pharaonic Pyramids and many various shapes), Perfumes Bottlesâ?¦ etc. In addition to the Laser/3D Innovations which are made with love collection embodies the true of craftsmanship in a perfect, peerless, and unconventional gift, suitable for any number of occasions. CRYSTAL-LADIES JEWELRY, Handmade Gift, Wedding, Birthday, and various products such as: Pendants, Necklaces, Rings, Earrings, Bracelets, SETS (Necklace + earring), Watches, Brooches, Hair Ties and Keychain. The metal parts are allergy tested, made with 24K Gold plated or Chrome plated to give lustrous, bright and attractive shine. Not less than 10 years guarantees are given for the plated materials and the highest quality of the crystals brilliance is guaranteed for the lifetime. CRYSTAL-CHANDELIERS, interior lighting chandeliers. It is the worldâ??s most used crystal brand by European and key international chandelier manufacturers. Chandeliers Collections are Classic, Post Modern, Modern & Oriental. Crystal Stones: for accessories production: Color Chatons (888 & 888A), Flat Back Stones (HotFix & No HotFix), stones for Sew-on & for bling nails .
