TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
Introduction This machine used for laminating cardboard with corrugated board & grey board. The unique design of front lay controlled by intelligent control system, ensures accurate position of laminating. Adopt advanced pneumatic design, reduces workerâ??s labor intensity and saves the time of adjusting and cleaning, and improves the working efficiency. The item flute laminating has a higher top sheet feeder table, the height is 185cm, so feeding bottom sheet is easy. Automatic feeding bottom sheet , but the feeding of top sheet is manual. Characters 1. Servo motor drives the suction belts to send bottom sheet The bottom sheet feeding is smooth and precise. 2.Advanced pneumatic design saves the time of adjusting and cleaning Less workers , more efficient. 3.High performance and excellent quality Adopt imported parts or domestic famous brands 4.Pneumatic correction mechanism for the top sheet Ensure the laminating precision and stability. 5.Plc and touch screen control system Operation is more simple Service Warranty: 1 year After-sales service : engineers available to service machinery overseas Machines are new (or unused) and the guarantee period will be given thirteen months from shipment date. During this period, the seller will offer free maintenance and free spare parts that caused by the machineâ??s quality, but the buyer must pay the courier cost. Parts damaged because of mishandling and consumable parts are not covered by any warranty. -
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material. Characteristics: 1.Having two colors printing device can be chosen 2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw. 3.Printing, feeding, and packing can complete in one processing. 4.Packing straw length is adjustable within a certain range. Specification Drink Straw Diameter(mm) 5-12mm Need change some parts. Straw Length(mm) Standard: 190-210mm Extra mould: 170-260mm By change the sealing and cutting mold, printing cylinder Packing Model Paper type: wrap paper Sealing type: 3 side sealing 25-30mmï¼?Paper width: 25-30mm Production Speed With printingï¼?300pcs/min Without printingï¼?400pcs/min Printing Printing Colorï¼?Double Colour Printing type: flexographic 2.38mm; Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm Paper Unwinding Frame 1SET Tension adjustï¼?Mechanical tension device, adjusted by manual Wrap paper roller core sizeï¼?3inchï¼?4.7inch Straw feeding hopper Material :Stainless steel frameï¼? Plexiglass: Adjustable to match straw length Straw down deviceï¼?induction and swing arm Feeding modelï¼?by chain feeding Printing Unit Single/Double Color Power transmission ï¼?By chain Between printing unit: By gear Traction unitï¼?1sets, rubber roller and chrome plated roller Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller Dry unitï¼?1SET , by hot air, with temperature color registerï¼?By manual Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple Materialï¼?mould steel Conveyor Belt 1setï¼? Synchronous reduction motor+ controller Counter dam-brush: one set, lifting by pneumatic cylinder Controller Counter and buzzersï¼?1setï¼?HUALI Brand Controlling inverter: 1.1KW Schneider Temperature controllerï¼?1setï¼?KEQIANG Brand Low-voltage electric parts: Schneider Total Power (Kw) 1.5 (220V) Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H) Weight (Kg) 400
Moving Walk Way A moving walkway, also called a travelator, is a horizontal conveyor-belt-like transportation system commonly found in public places such as airports, exhibition halls, and shopping centers. It is designed to transfer individuals over short to medium distances efficiently. Capable of traveling at speeds of up to 1.5 meters per second, moving walkways provide a favorable and convenient mode of transportation. Features of Moving Walk Way Efficient Transportation System: Moving walkways offer a fast and efficient mode of transportation for individuals who need to move over medium to short distances within buildings. Adjustable Speed: The speed of moving walkways is adjustable, ranging from 0.5 to 1.5 meters per second, allowing passengers to choose their desired pace. Secure and User-Friendly: Moving walkways are equipped with safety features such as side barriers and sensors, ensuring the safety of passengers. They provide a comfortable and convenient way to move around public spaces, especially for the elderly or people with disabilities. Gallery of Moving Walk Way As one of the leading China passenger lift suppliers of moving walkways, we provide high-performance moving walkway solutions for a variety of public and commercial venues. Our moving walkways are well designed to effectively improve pedestrian traffic efficiency and reduce congestion. Our products undergo rigorous quality testing and meet international safety standards to ensure the safety of every passenger. As a China moving walk manufacturer, we will do our best to meet all the needs of customers.
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
