Wate spray fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity:Ground): 38 L (13) Jet distance: 8 m (14) G.W: 28.8KG; CBM: 0.20M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Steam Cooling Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) (10) Hand Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: ú+10 um (12) Capacity (Ground): 38 L (13) Jet distance: 8 m Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip:ú+10 um (12) Capacity(Ground): 38 L (13) Jet distance: 8 m (14) G.W: 25.4KG; CBM: 0.19M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650W; (5) Mist Fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Wall Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity(Wall): 10 L (13) Jet distance: 8 m (14) G.W: 17.1KG; CBM: 0.093M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Air Cooler design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Mist Fans Mist Fan (AM-650GB) Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20 it include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Esd magazine racks, antistatic chairs , esd trays , esd boxes , esd carts , etc ..
dimension : L 630 W 530 H 570 Side panel slot depth: 4mm width 5.5mm pitch 10mm Surface resistance 10e4-10e6 /10e6-10e9 Specification for PCB 630x 50-460 mm Storage capacity 50pcs Max Tolerant Temperature 85 Adjust way gear track Materials: conductive side panel, aluminum pillar ,zincification steel base. ref postion :A=34 B=34
Color: conductive PU leather. blue and black are available. Dimension: 430*400mm(chair seat); 400*300mm(chair back) Height adjustable: 440-580mm ( with 160mm adjustable pneumatic rod) Surface resistance,System resistance:10e4-10e9 Specification: carbon steel chroming five-star-foot; conductive plastic castor; conductive metal chain
Type:antistatic smt magazine rack cop-803 Surface resistance: 104~106 / 106~109 Overall size :L355 xW 320 x H563mm Storage capacity :50 pieces of PCB Specifications :350x (50-250)mm Side guide slot :depth 3.5mm, width 5mm, pitch 10mm The top and bottom boards :made of metal Heat resistant :80 C , 120 C , 200 C Side board structure material :plastic panel structure :combined panel
Type: esd PCB storage magazine rack Surface resistance:10e4~10e6 Overall size: 460 x 400 x 563mm Storage capacity 50 pieces of PCB Specifications :460x (50-330)mm Side guide slot :depth 3.5mm, width 5mm, pitch 10mm The top and bottom boards :made of metal Heat resistant :80C adjust way :gear track
Taizhou Double World Plastic&Mould Co., Ltd admin(at)ddwmould(dot)com Ddw 8 cav plastic flip cap mold Plastic flip cap mold steel: 718 Moq: 1 set 35 days to finish Wooden case packing DDW PLASTIC&MOULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Taizhou Double World Plastic&Mould Co., Ltd admin(at)ddwmould(dot)com Ddw 8 cav plastic flip cap mold Plastic flip cap mold steel: 718 Moq: 1 set 35 days to finish Wooden case packing DDW PLASTIC&MOULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Taizhou Double World Plastic&Mould Co., Ltd admin(at)ddwmould(dot)com Ddw 8 cav plastic flip cap mold Plastic flip cap mold steel: 718 Moq: 1 set 35 days to finish Wooden case packing DDW PLASTIC&MOULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Taizhou Double World Plastic&Mould Co., Ltd admin(at)ddwmould(dot)com Plastic pe handle of 30mm pet bottle Pe material 2.8g Moq:50000pcs DDW PLASTIC&MOULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, and also plastic products: PET perform, PET Jars, PET can, for plastic beverage packaging, cosmetic packaging, chemical packaging, food packaging, auto packaging etc. Our annual output has already achieved 300 sets moulds, 5millon pcs PET pefroms, PET can, PET jars. From 2013, we started Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Ddw pe plastic handle of 30mm pet bottle Pe material Weight:2.8g Moq: 50000pcs DDW PLASTIC&MOULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, and also plastic products: PET perform, PET Jars, PET can, for plastic beverage packaging, cosmetic packaging, chemical packaging, food packaging, auto packaging etc. Our annual output has already achieved 300 sets moulds, 5millon pcs PET pefroms, PET can, PET jars. From 2013, we started Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Plastic pe handle of 30mm pet bottle Pe material 2.8g Moq:50000pcs DDW PLASTIC&MOULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, and also plastic products: PET perform, PET Jars, PET can, for plastic beverage packaging, cosmetic packaging, chemical packaging, food packaging, auto packaging etc. Our annual output has already achieved 300 sets moulds, 5millon pcs PET pefroms, PET can, PET jars. From 2013, we started Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Taizhou Double World Plastic&Mould Co., Ltd. admin(at)ddwmould(dot)com Wholesale 5 gallon water bottle pet preform Hot selling good quality 55mm 5gallon pet prefroms, pet jars, pet bottles, pet packaging, blowing pet bottles Moq: 5000pcs Payment terms: tt Diametrer Different weight of 5 gallon pet prefroms 55mm 180g 250g 340g 450g 480g 550g 600g 630g 650g 660g 680g 700g 730g 750g 800g DDW PLASTIC&M OULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, and also plastic p roducts: PET perform, PET Jars, PET can, for plastic beverage packaging, cosmetic packaging, chemical packaging, food packaging, auto packaging etc. Our annual output has already achieved 300 sets moulds, 5millon pcs PET pefroms, P ET c an, PET jars. From 2013, we started Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Taizhou Double World Plastic&Mould Co., Ltd. admin(at)ddwmould(dot)com Wholesale 5 gallon water bottle pet preform Hot selling good quality 55mm 5gallon pet prefroms, pet jars, pet bottles, pet packaging, blowing pet bottles Moq: 5000pcs Payment terms: tt Diametrer Different weight of 5 gallon pet prefroms 55mm 180g 250g 340g 450g 480g 550g 600g 630g 650g 660g 680g 700g 730g 750g 800g DDW PLASTIC&M OULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, and also plastic p roducts: PET perform, PET Jars, PET can, for plastic beverage packaging, cosmetic packaging, chemical packaging, food packaging, auto packaging etc. Our annual output has already achieved 300 sets moulds, 5millon pcs PET pefroms, P ET c an, PET jars. From 2013, we started Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold
Taizhou Double World Plastic&Mould Co., Ltd. admin(at)ddwmould(dot)com Wholesale 5 gallon water bottle pet preform Hot selling good quality 55mm 5gallon pet prefroms, pet jars, pet bottles, pet packaging, blowing pet bottles Moq: 5000pcs Payment terms: tt Diametrer Different weight of 5 gallon pet prefroms 55mm 180g 250g 340g 450g 480g 550g 600g 630g 650g 660g 680g 700g 730g 750g 800g DDW PLASTIC&MOULD is specialized in making Plastic PET Perform Moulds and Plastic Cap Moulds , Plastic blow moulds, and also plastic p roducts: PET perform, PET Jars, PET can, for plastic beverage packaging, cosmetic packaging, chemical packaging, food packaging, auto packaging etc. Our annual output has already achieved 300 sets moulds, 5millon pcs PET pefroms, P ET c an, PET jars. From 2013, we started Household Mold making, like Plastic Chair Mold, Plastic Crate Mold, Plastic Trash Can Mold, Plastic Tray Mold, PVC Pipe Mold, and other kinds of Plastic Injection Mold