DESCRIPTION CS-106 Winshield is a specially formulated copolymer protective coating used in place of windows frames, glass, bathtub, plywood, plastic faced formwork, moulds prior to casting concrete, to ensure a clean release and protective purpose. FEATURES Do not corrode glass, plastic or equipment Minimize subjects cleaning Cost effective Apply on plywood, timber, steel, glass and plastic faced Non-staining, Non toxic, non hazardous Water-based and environmentally compatible
Product Features : 1.Strong adhesion and economical choice. 2.Quick setting and curing time. 3.Easy and quick use. 4.Suitable for dry fastening. 5.Suitable for wall and overhead application. 6.Reduced anchor spacing and edge distance. 7.Variety of cartridge sizes are available. 8.Partially used cartridges can re-used by replacing the mixer nozzle. Base Material : Concrete,solid masonry ,and hollow bricks masonry. Application : Fixing machines,handrails,steel constructions,and reinforcement bars. Shelf Life : 12 months after the manufactured day if stored in perfect conditions.
Product Description Oxidized bitumen is high quality, general purpose oxidized bitumen for various applications. Uses Foundation damp-proofing Built-up roofing systems. Roll and pour application of bitumen felts. Bonding of SBS modified membranes by hot mop method. Sealing of laps and joints of various bituminous felts and membranes. Wet area waterproofing. Bonding of wooden boardsâ?? insulation panels. Road resurfacing and repair. Application Heat the drum until the oxidized bitumen starts melting at approximately 130Deg.C. Apply by roller. Squeegee or direct rolling to an average rate of 1Kg/sq.m. For hot mop application. The membrane should be applied while pouring to avoid re-cooling. Packing In steel drum(180KGS) In SEALEDBAGS(25KGS/40KGS)
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
CP-201 is a three-component material. With organic and inorganic complex, it can provide a solid, and thermal shock resistant floor. It is solvent free and is a â??Green Productâ??. The finish is easy to clean, water-resistant, abrasion- resistant and good impact- resistant. With binary complex bond, it can resist the growth of moulds. Feature solvent-free, friendly to human. compression and impact resistant. chemical resistant as its special structure. suitable for critical area (0~80â??). suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc Application A. Substrate preparation: 1.Ensure that the substrate is solid and remove dust, grease or other contaminants by grinding or blasting. 2.Enhance bonding with anchor grooves. B. Application of CP-201 1. Prime the substrate with PU primer. 2. Mix A, B and C continuously until it becomes a smooth and lump-free paste. Apply the mixture with special feeder to designed thickness and smooth the finish with steel trowel or spatula for use. Do not apply it without professional workers.
Description PU-850 is a one component, thixotropic, polyurethane waterproofing membrane where viscosity of the liquid is paramount. In applications such as sloped roofing, flashing details and under tile waterproofing PU 850 cures to form a durable yet elastic membrane with strong adhesion to many types of substrates. PU 850 is fast curing, and is tack-free in less than two hours, with exceptional elasticity. Due to it thixotropic, hydrophobic and elastomeric nature, PU 850 is the perfect solution to provide excellent waterproofing on vertical and sloped surfaces without running. Use - Shower Recesses - Bathrooms - Laundries - Kitchens - Balconies - Retaining Walls - Planter boxes - Steel (suitably primed) - Patios - Plasterboard - Courtyard Areas - Brick - Concrete, Cement render, plaster - Wet area wall lining board - Hardie/CSR sheet flooring - Light weight aggregate block Feature â?¢ Easily applied onto vertical and sloped surfaces with no running OR bubbling. â?¢ Excellent adhesion to most substrates. â?¢ No thinning required. â?¢ Excellent thermal resistance, never turning soft. â?¢ Excellent cold resistance, remaining elastic to -40â?°c â?¢ No accumulation of humidity under coating â?¢ Excellent mechanical properties â?¢ Highly stable, will not bleed through porous materials â?¢ Bitumen free â?¢ Highly elastic and stable. Packaging 15 Litre pail Consumption 1.2~1.5kg/m�² Shelf Life Unopened pails can be stored for up to 12 months in a cool, dry and weatherproof environment.
DESCRIPTION Power Screw adhesive is one of ITLS new range of power adhesives developed to give a cost effective and high adhesion performance. It is very low in odor and free of aromatic solvent for use indoor and outdoor. It was designed for use by both the home handy man and professionals. Power Screw adhesive which consists of tough elastomeric rubber, tackifying resins and Light hydrocarbon solvent. Power Screw can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, ,mild steel, galvanized iron sheet, back of mirror (on wall only). FEATURES *Unique user friendly, highly pseudo-plastic and non runny characteristic making it TRULY easy to use on vertical wall and ceiling. * Extremely easy to extrude from cartridges in winter making it an all round product for use in all seasons. * Gap filling because of its higher solid content and especially it is highly pseudo-plasticity (soft smooth by stiff, non-sagging) property. * Flexible but tough for use around home and in construction * Easy on hand to extrude and apply due to its unique consistency. *Easy to spread our adhesive evenly and thinly due to its soft buttery consistency. * Broad application for most timber based, cementitious substrates, ceramic and most common metallic construction products. * Printable when dried. * Help to spread out pressure on bonded materials thereby prevent localized stress leading to adhesion failure.
Our three-pass full wet-back internal combustion boiler features a corrugated furnace and smoke tubes with internal ribs for increased heat transfer and stability. Constructed with full flange butt welding and an 'expand first, then weld' technique, it minimizes thermal stress and corrosion, enhancing longevity. The WNS boiler type offers automation, stable outputs, and is easy to maintain. Installation is straightforward and quick. By incorporating our pellet burner, your boiler can be transformed into an efficient biomass boiler. This modification offers a highly effective solution for ensuring a comfortable environment, even in extremely cold conditions.
