Hemostasis Connector (With Silicone Vale And O Ring)
Henostasis Y Connector (With Silicone Valve And O Ring)
Nose pine Made in casting by latest technolagy with special star cut ad 2000 pieces
Ring joint gasket..
Cylinder liner, piston, gudgeon pin, piston ring, circlips, rubber ring, air cooled block, water cool block, cylinder head, crankcase, crankshaft, gasket, bush, bolt, nut.
Two Wheeler Engine Spare Parts Like Engine Valve , Piston Kit , Connecting Rod , Camshaft Assembly , Valve Guide And Rocker Arms..
Metallic rings.
We have different Ring designs to suit customer specific requirements.
Glass Fibre Reinforced Plastics(GRP) pipes, joints and fittings are made as per IS 14402 (Pipes used for Sewerage, Industrial Water and Water (other than Portable) and IS 12709 (Pipes used for Portable Water Supply). The said IS prescribes usage of Sealing Rings as per IS 5382. We have different ring designs to suit specific socket design
We have different Ring designs to suit customer specific socket design.
We have different Ring designs to suit customer specific socket design.
Cast Iron Detachable (CID) joints are used to connect Asbestose Cement Pressure Pipes. These CID joints require Rubber Rings as per IS:12988 which prescribes quality of such Rubber Rings as per IS:5382-1985.
All type of rubber moulded parts like bearing seal O-ring and compressed rubber moulded parts. Pieces.500 (minimum) Minimum 20 kg
Flanges, fittings, swivel joints, hammer unions, welding neck flange, slip on flange, socket weld flange, lap joint flange, threaded flange, blind flange, spectacle blind flanges, high hub flanges, flat flanges, ring type joint flanges, long welding neck flange, orifice flange, jis flange, api 6a flange, sorf flange, blrf flange, groove & tongue flanges, expander flange, elbow, tees, cross, forged street elbow, coupling, half coupling, cap, round plug, hexagon plug, square plug, hexagon bush, forged hex nipple, forged union, pipe nipple, bull plugs, swage nipple, hose union, hose barb union, long radius swivel joints, short radius swivel joints. asme b16.5 flange, asme b16.47 flange, asme b16.48 flange, asme b16.36 flange, din flange, bs 4504 flange, bs 10 flange, en1902 1 flanges, stainless steel flange, carbon steel flange, duplex & super duplex steel flange, low temperature carbon steel flange, alloy steel flange. Pipe fittings .Manufacturing, production, exporter
A BLRF flange, or blind raised face flange, is a type of flange that is used to blank off the end of a pipe. It is a flat plate with a raised face, and it has all the necessary bolt holes for installation. BLRF flanges are typically made from steel, stainless steel, or alloy steel, and they are available in a variety of sizes and pressure ratings. Technical Specifications: Type: Blind Raised Face Material: Carbon Steel, Stainless Steel, or Alloy Steel Nominal pipe size (NPS): 1/2" to 24" Flange pressure class: 150 to 2500 Standard: ASME B16.5 or ASME B16.47 Facing: Raised face Bolt holes: ANSI #10 or #12 Finish: Black, mill finish, or hot dipped galvanized Applications: Piping systems Valves Pumps Tanks Pressure vessels Instrumentation Advantages: They are strong and durable. They are easy to install. They are available in a variety of sizes and materials. They are cost-effective.
ASME B16.5 flanges are a set of American Society of Mechanical Engineers (ASME) standards that define the dimensions, materials, and tolerances for pipe flanges and flanged fittings. The standard covers flanges made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. It also includes requirements and recommendations regarding flange bolting, flange gaskets, and flange joints. The ASME B16.5 standard is used in conjunction with other ASME standards, such as the Boiler and Pressure Vessel Code and the B31 Piping Codes. It is also widely accepted in other countries, and is often referred to as the ANSI B16.5 standard. The ASME B16.5 standard defines six types of flanges: Weld neck flanges Slip-on flanges Socket weld flanges Threaded flanges Lap joint flanges Blind flanges Reducing flanges Each type of flange has different dimensions and requirements. For example, weld neck flanges have a neck that is welded to the pipe, while slip-on flanges are simply slipped over the pipe. The ASME B16.5 standard is an important reference standard for the design, construction, and installation of piping systems. It ensures that flanges and flanged fittings are safe and reliable, and that they can withstand the pressures and temperatures of the application. Here are some of the key features of ASME B16.5 flanges: We have available in a variety of materials, including carbon steel, stainless steel, and alloy steel. We have a variety of pressure-temperature ratings, from 150 psi to 2500 psi. We have available in a variety of flange types, to suit different applications.
ASME B16.47 is an American Society of Mechanical Engineers (ASME) standard that specifies the dimensions, materials, and tolerances for large diameter steel pipe flanges. The standard covers flanges with nominal pipe sizes (NPS) from 26 to 60 and pressure class ratings from 75 to 900. ASME B16.47 flanges are divided into two series: Series A and Series B. Series A flanges are based on the MSS SP-44 standard, while Series B flanges are based on the API 605 standard. The main difference between the two series is that Series A flanges have a larger bolt circle diameter than Series B flanges. ASME B16.47 flanges are typically used in high-pressure and high-temperature applications, such as in the oil and gas industry. They are also used in other industries, such as the chemical, power, and water treatment industries. Here are some of the key features of ASME B16.47 flanges: They are made of steel, cast iron, or stainless steel. They have a raised or flat face. They have a bolt circle diameter that ranges from 125 to 600 millimetres. They have a pressure class rating that ranges from 75 to 900. They have a thickness that ranges from 6.3 to 127 millimetres. ASME B16.47 flanges are an important part of many piping systems. They help to ensure the safe and reliable operation of these systems.
The ASME B16.48 standard covers operating line blanks in sizes NPS 1â??2 through NPS 24 for installation between ASME B16.5 flanges in the 150, 300, 600, 900, 1500, and 2500 pressure classes. A line blank is a pressure-retaining plate that is used to block off a section of pipe. It is typically made of steel or cast iron and has a variety of features, including a raised face, flat face, or grooved face. The ASME B16.48 standard specifies the dimensions, tolerances, materials, and markings for line blanks. There are two main types of line blanks: Spectacle blind flanges: These have a solid end and an open end connected by a web or tie bar. Paddle blanks: These are similar to the solid end of a spectacle blind flange, but they have a plain radial handle. Line blanks are used in a variety of applications, including: To isolate a section of pipe for maintenance or repair To prevent the flow of fluid in a pipe To provide a test point for a piping system The ASME B16.48 standard is an important specification for the design and manufacture of line blanks. It ensures that line blanks are safe and reliable, and that they meet the requirements of the applicable codes and regulations.
An ASME B16.36 flange is an orifice flange, which is a type of flange used for measuring the flow rate of fluids in a pipeline. It is defined by the American Society of Mechanical Engineers (ASME) standard B16.36. Orifice flanges have two pairs of pressure tappings, which are machined holes on the flange that allow the fluid pressure to be measured. The orifice plate, which is a thin plate with a calibrated hole, is installed between the flanges. The flow rate of the fluid is determined by the difference in pressure between the two sides of the orifice plate. ASME B16.36 flanges are available in a variety of materials, including carbon steel, stainless steel, and alloy steel. They are also available in a variety of sizes and pressure ratings. Here are some of the key features of ASME B16.36 flanges: They are used to measure the flow rate of fluids in pipelines. They have two pairs of pressure tappings. The orifice plate is installed between the flanges. They are available in a variety of materials and sizes. They are designed to meet the ASME B16.36 standard. Here are some of the applications of ASME B16.36 flanges: Oil and gas pipelines Chemical plants Power plants Water treatment plants Wastewater treatment plants Other industrial applications
BS 4504 is an obsolete British Standard that specifies the dimensions and tolerances of flanges and bolting for pipes, valves, and fittings. It is now superseded by EN 1092-1, but it remains in use for the dimensions of light duty, economy stainless steel flanges in applications where corrosion resistance and hygiene, rather than high pressures and temperatures, are the primary considerations. BS 4504 covers four types of flanges: Plain flanges Boss flanges Integrally cast or forged flanges Weld neck flanges The flanges are available in a variety of materials, including carbon steel, stainless steel, alloy steel, and copper. They are also available in a variety of pressure ratings, from PN6 to PN40. The technical specifications of BS 4504 flanges are as follows: Nominal size: DN10 to DN400 Pressure rating: PN6 to PN40 Material: Carbon steel, stainless steel, alloy steel, copper Finish: Plain, raised face, grooved Bolting: DIN 2566 or BS 3692 BS 4504 flanges are used in a variety of applications, including: Water and wastewater treatment Chemical processing Food and beverage processing Pharmaceutical manufacturing Power generation Oil and gas