Features: 1. Oil absorbent boom is made of super absorbent polypropylene with strong outer mesh There is a nylon cable running through each boom which can be connected each other by a special steel connector. 2. There are a full range of oil absorbent material similar to oil absorbent boom like oil absorbent pillow, oil absorbent sweep and ect. 3. The oil sorbent boom can be used to control oil spills such as fuel oil, hydraulic oil, gasoline, diesel and ect. Item Dimension Pack(Bag or Carton) Absorb Capability Weight XTL127-1 Marine Oil absorbent Booms 12.7cm*3M 4pcs/ B 96 L/ B 8 kg/ B XTL127-2 Marine Oil absorbent Booms 12.7cm*6M 2pcs/ B 96 L/ B 8 kg/ B XTL220-1 Marine Oil absorbent Booms 20cm*3M 4pcs/ B 192 L/ B 16 kg/ B XTL220-2 Marine Oil absorbent Booms 20cm*6M 2pcs/ B 192 L/ B 16 kg/ B
Features: 1. It is an kind of heavy duty oil containment boom with inflatable air chamber to use in nearshore, harbors, open waters and offshore. 2. It is made of neoprene rubber reinforced by two layers of high strength fabric. The neoprene rubber has good property of oil resistance, chemical resistance and UV reristance. So the inflatable neoprene oil boom has longer service life with a minimum maintenance. 3. There are elastic stiffen rods between air chambers to make the boom stiff to prevent the waves from overtopping. Each individual air chamber is isolated and will not be affected by other adjacent damaged air chambers. 4. The inflatable rubber boom works under the hydraulic power pack and air blowers. It can be packed in reel machine to store in special designed container or covered by tarpaulin. Simple Sketch: Technical Data: Model /Parameter WQJ800 WQJ1000 WQJ1200 WQJ1500 WQJ1800 WQJ2000 WQJ2600 Overall height(mm) 800 1000 1200 1500 1800 2000 2600 Freeboard(mm) 280 360 400 500 560 600 810 Draft(mm) 370 430 590 780 950 1100 1400 Max, working tensile strength(KN) 110 140 170 190 230 260 280 Standard length per section(m) 100/200 or as customers requirement Max, wave height to withstand(m) 2 2 2.5 3 3 4 4 Max, wind speed to withstand(m/s) 15 15 20 20 20 25 25 Max, current speed to with stand(KN) 2-3 3 3-4 3-4 3-4 3-4 3-4 Standard connector ASTM or Stainless steel hinge pin connector Drive power of power pack(KW) 14.5kw 14.5kw 14.5kw 21kw 21kw 21kw 21kw
Features: 1. Permanent Oil boom is special designed for permanent deployment to contain oil spills or debris in harbors, tidal inlets and other oil facilities. 2. It is constructed with semi-rigid PU fabric or neoprene rubber belt and high density polyethylene (HDPE) float shells filled with Polyurethane (PU) foam. 3. The Permanent oil containment boom is fixed ASTM universal or quick connector for easy deployment. Technical data: Model POB450 POB600 POB750 POB900 Overall height 450mm 600mm 750mm 900mm Fabric material PVC or neoprene belt Float HDPE or per customers requirement Section Length 20m or 25m or per customers requirement Max working tensile strength(Kn) 40 50 70 80
Features: 1. Oil absorbent boom is made of super absorbent polypropylene with strong outer mesh There is a nylon cable running through each boom which can be connected each other by a special steel connector. 2. There are a full range of oil absorbent material similar to oil absorbent boom like oil absorbent pillow, oil absorbent sweep and ect. 3. The oil sorbent boom can be used to control oil spills such as fuel oil, hydraulic oil, gasoline, diesel and ect. ItemDimensionPack(Bag or Carton)Absorb CapabilityWeight XTL127-1 Marine Oil absorbent Booms12.7cm*3M 4pcs/ B96 L/ B8 kg/ B XTL127-2 Marine Oil absorbent Booms12.7cm*6M2pcs/ B96 L/ B8 kg/ B XTL220-1 Marine Oil absorbent Booms20cm*3M4pcs/ B192 L/ B16 kg/ B XTL220-2 Marine Oil absorbent Booms20cm*6M2pcs/ B192 L/ B16 kg/ B
Features: 1. The weir oil recovery skimmer consists of floating head, power pack and oil hoses between the skimmer head and the power pack. 2. It recovers spilled oil via self-adjusting weir and suction oil pump. 3. The weir skimmer is suitable for recovery of oil spills with low and medium viscosity and can be widely used on harbors, oil ports, wharfs, rivers, lakes, shipyards, ship-breaking yards, petroleum and chemical industries, power plants, wastewater treatment plants and other site where are oil spills to be recovered. Technical data: ItemYSJ-30YSJ-50YSJ-100 Max. skimming rate(m/h)3050100 underwater depth of overflow weir(mm)35-9050-12080-150 drive power(diesel engine or explosion-proof motor)(KW)14.5/7.514.5/1121/15 suction head of oil recovery pump(m)888 operating pressure of hydraulic cylinder(mpa)555
Features: 1. Oil absorbent pad or mat is one of the important materials for treading oil spill on water. It is made of 100% polypropylene with high oleophilic property. 2. It is not only used for absorbing oil inside absorbent booms but also for absorbing oil spills in water where mechanical recovery devices cannot recovery oil spills or the oil dispersant can be not used. Item Technical data Color White/grey/green or as customers requirement Absorbent capability 15-20times of self weight Material 100% polypropylene Size as customersrequirement Storage life 3 years
Features: 1. Disc/brush oil recovery skimmer is a floating oil skimmer with rotating disc or brush to recovery the oil spills in water. 2. The disc and brush could be exchangable according to customers requirement. It consists of a power pack, a floatable head and linking hoses between the head and power pack. 3. There are many models to suit oil viscosity and recovery conditions. These devices have been widely used on open seas, rivers, harbors, lakes and ponds. Technical Data: Model/ParameterZSJ5ZSJ10ZSJ20ZSJ30ZSJ60 rotate speed (R/M)40-10040-10040-20040-30040-600 Working pressure(Mpa)3~63~63~63~65~8 Flow rate of oil pump(m/h)510203060 recovery capability(m/h)510203060 drive power(diesel engine or explosion-proof motor)KW4.0/36.3/44.0+6.3/7.514.5/1121/15 main unit weight (Kg)5570120160200 weight of power station (KG)100115255500550 diameter of oil discharge hose222.534
Features: 1. The weir oil recovery skimmer consists of floating head, power pack and oil hoses between the skimmer head and the power pack. 2. It recovers spilled oil via self-adjusting weir and suction oil pump. 3. The weir skimmer is suitable for recovery of oil spills with low and medium viscosity and can be widely used on harbors, oil ports, wharfs, rivers, lakes, shipyards, ship-breaking yards, petroleum and chemical industries, power plants, wastewater treatment plants and other site where are oil spills to be recovered. Technical data: Item YSJ-30 YSJ-50 YSJ-100 Max. skimming rate(m/h) 30 50 100 underwater depth of overflow weir(mm) 35-90 50-120 80-150 drive power(diesel engine or explosion-proof motor)(KW) 14.5/7.5 14.5/11 21/15 suction head of oil recovery pump(m) 8 8 8 operating pressure of hydraulic cylinder(mpa) 5 5 5
Please contact us for more informations
PTFE lubricated ultrafine powder Lubricating powder is treated with irradiation for crushing treatment, which is easy to disperse in rubber, thermoset plastic, thermoplastic, grease, ink and oil, and it is not agglutinate, non - forming, and improves its lubricity and reduces wear, friction.
1. We adopt the micro glass fiber with steady performance as the filter media which is produced by the LYDALL (USA) and HV (Germany). 2. The filters are designed with reasonable multilevel filter media ,which means small initial pressure difference and long working time. It reduces the operation costs greatly. 3. The filters are equipped by double static channel device with safe and efficient assembly process, which make sure the filters to work well in the bad environment with high pressure, high temperature and high corrosion.
Working time >4000 h Initial pressure difference < 0.02 mpa Residual oil amount < 3ppm Model no.: 1614 9056 00, 2906 0565 00 Standard component: standard component Category: oil separator Micro: 0.1um Separation mode: filter type Pressure: low pressure Trademark: coolworks or customized Specification: 84*36*36 Hs code: 8421999000 Customized: non-customized Material: fiber glass Object: fertilizer Installation: vertical Distillation equipment type: steam distillation equipment Application: industry Transport package: neutral packing or customized Origin: china Product description Atlas copco compressor air oil separator 1614905600, 2906056500 1.Filtering precision:0. 1 micron . 2.Oil contained in compressed is below 3ppm. 3.Filtration efficiency:99.99%. 4.Service life is approximately 4000h. 5.Initial pressure differential less than 0.02mpa. 6.Filter element of air oil separator is made by the thin fiberglass, which imported from germany hv company. 7. Structure: the outer is metal nets, inside is high densite fiber glass and gas separation material, most inside is the metal nets, flange connection with sealing ring.
It has been widely used to decolor and refine of the animal oil and fat, plant slipid and cosmetic raw material, petroleum industry, chemical industry for daily use, it has also been used in sewage disposal, filter noxious gas and catalyze petroleum in grain. In 25kgs bags of ply pp woven
It is mostly used in the petroleum exploration in Africa, South America, Holland, Danmark, and norway. We can also offer 95% 96%. 23-25mt can be loaded in one 20fcl.
Cas:9002-88-4 Hdpe-high density polyethylene Grade: blow molding grade, injection molding grade, etc. High-density polyethylene (hdpe) or polyethylene high-density (pehd) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of hdpe. Application: make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire- The package is 25kg bag.
Copper water tube Copper water tube
Copper water tube Copper water tube
Copper tubes Copper water tube
PF102 resin is yellow color C5 hydrocarbon resin obtained from aliphatic petroleum-derived monomers. It is mainly used for hot melt road marking paint cause the acid modification could improve tack property and flowability.
Light yellow to brown oily liquid, irritating odor, the relative density: 0.994. Flash point: 76.5 ¡æ. Soluble in benzene, ethanol, ether, petroleum ether, micro-soluble in water. 1000kg/IBC box or 200kg/plastic drum, maybe for your need.