Traffic Channelizer Barrel Drum is the highest quality safety drums ideal for traffic control needs. The Traffic Channelizer Barrel Drum is widely used to indicate directional changes for road lane closures,separator and crossroad at construction sites. They are ideal for both pedestrians and vehicles traffic control. The barrel drum base is made from 100% recycled PVC, and is incredibly durable in various weather conditions. The weighted base of 15 Kgs and the barrel drum that's water storage capability up to 200 litres ensures maximum stability and making it unmovable resistance from passing vehicles. TRAFFIC CHANNELIZER BARREL DRUM ~ Size 1080H x 780 mm; ~ Weight appx 4Kgs; ~ HDPE material; ~ Reflective collar sheeting. BARREL DRUM BASE ~ Size 780mm; ~ Weight 15Kgs; ~ Recycled PVC. ~ Withstand temperature -55C to +50C; ~ Tensile Strength up to 15.0MPA; ~ Elongation At Break 500%; ~ Hardness 90A; ~ Impact Elasticity 31%; ~ Abrasion Performance 0.21cm3 / 1.61KM Traffic Channelizer Barrel Drum market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. .
Natural Rubber Speed Hump replaces the conventional concrete speed hump. It is easily fixed and dismantled conveniently as and when one wished. Natural Rubber Speed Hump is designed to reduce vehicle speed, built for long lasting and cost efficient. Natural Rubber Speed Humps - Intermediate Piece 355mm (W) x 50mm (H) x 255mm (L) and End Cap Piece 355mm (W) x 50mm (H) x 175mm (L). Natural Rubber Speed Hump Advantages: Optimum Resilience, High Elasticity & Stretch Strength, Corrosion Immunity, Excellent Weather Resistant, High Mechanical & Tensile Strength, Long Life Span, Immune to Acids, Alkaline, Metals, Salts, Chemical, Non Hazardous, High Elongation At Break, Stable Colour. .
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Standard packaging of 200mm (FXJ - RS200) and 250mm (FXJ - RS250) width available to accommodate concrete expansion joints. 150mm width packing available upon request Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers. Flexi
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Display shown is Flexijoint PVC Waterstop " Dumbell " Series. Standard packaging of 150mm (FXJ - DB150) and 230mm (FXJ - DB230) width available. ( Picture Taken : Posterior View ) Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ 112L x 91W x 20H (mm); ~ Shank 55mm; ~ Load capacity up to 25 tons; ~ Highest reflectivity lens area 168 square millimeters; ~ High durability; ~ High impact resistance; ~ Grove bottom for better grip and easy installation; Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ Meets MS 1719: 2003 standard; ~ 103 x 90 x 25 (mm); ~ Economical and durable; ~ Easy to install; Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Flexijoint PVC " W " Series :- 150mm ~ Good application to construction joints commonly use in floors,walls and underground slabs; 200mm ~ Good application to walls and under slabs where water pressure is higher than " W " series 150mm; 250mm ~ Good application to reservoirs, dams and under tunnel. Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers.
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Standard packaging of 200mm (FXJ - RR200) and 250mm (FXJ - RR250) width available to accommodate concrete contraction joints. 150mm width packing available upon request. Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers.
A bollard is an upright post used to control or direct road traffic, such as posts arranged in a line to obstruct the passage of motor vehicles. Fibre Reinforced Plastic Bollard extends its applications beyond just protecting various assets from impact and destruction to uses as road dividers, boundary markers, decorative fencing, barriers for road crossing and even at traffic lights pedestrian cross over area. The great popularity of this bollard lies on its corrosion free characteristic managing to save high costs of maintenance work in the long run. Features: Easy to install, Corrosion and maintenance free, Fire retardant, High impact resistance but lightweight, High durability and long term cost effectiveness savings.
Adjustable Square Parking Pole is flexible in its use as an upright post to control or direct road traffic out of a reserved parking area for particular event or function to be held. The upright pole can be lowered to be allowed as parking lot again when initial parking lots are fully occupied. It is easily removable as the pole's locking mechanism is on the base plates. Features: Easy to Install, Lasting gloss coat paint, Excellent barrier on vehicles and people.
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Flexijoint PVC " H " Series :- 150mm ~ Good application to expansion joints of low water pressure; 200mm ~ Good application to expansion joints where water pressure and displacements are greater than the " H " Series 150mm; 250mm ~ Good application to high water pressure like in reservoirs, dams, sewerage plants and water gates. Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers.
Rubber Round Stud Mat is uniquely designed as safety anti-slip floor mat. The well round studs able to trap dirt and dust exceptionally well concealing them in within the mat and not scattered out to the floor. Packing Size: 10000mm (L) x 1200mm (W) x 4.5mm thick for 1 roll. Advantages:- Durable, cost effective, easy maintenance, flexible indoor and outdoor use, good acupressure effect, chemically & oil resistance, floor protection against abrasion & damages. .
A chevron is a V-shaped pattern, a shaped symbols or arrows on rectangular signs may be placed at the actual location of the bend or curve to further mark the location of the curve and to assist in negotiation of the curve. Chevron signs are types of warning signs put on roadsides to warn motorists of upcoming sharp turns in the road. KEY SPECIFICATIONS:- ~ High Intensity Prismatic (HIP) fluorescent yellow reflective material; ~ Weather waterproof; ~ 600L x 750W (mm); ~ Ground in plant 5' pole;
LED Flashing Directional Arrow is suitable for temporary traffic control for road construction, traffic emergency handling and road service. It serves to ease traffic situation as it alarms drivers approaching construction site or road service ahead by directing the flow of the traffic. KEY SPECIFICATIONS:- ~ Using ultra bright LEDs as light sources; ~ Weather waterproof; ~ Easy carry folding type; ~ User friendly and easy to operate; TECHNICAL PARAMETERS:- ~ Output LED Light : High Intensity 24 pieces LED; ~ Night "On" mode detect darkness and activate lights but in deactivate mode when light levels increase hence conserving battery energy; ~ Power Source : 3 "D" size battery; ~ Material : Plastic ~Visibility 1,000 meters; ~ Size : 600L x 375 x 375 (mm); ~ Design : Optical control design; ~ Flash Style : Scroll flash(45 times/min)/flash(60 times/min; ~ Extra Features : Reflective film build on fonts and comes with 360 degree turn mounting bracket and hook ring; .
LED Flashing Arrow Banner directs traffic away from construction sites, emergency situations, or any other scenario where safety is a priority. KEY SPECIFICATIONS:- ~ Using ultra bright LEDs as light sources; ~ Weather waterproof; ~ Easy carry folding type; ~ User friendly and easy to operate; TECHNICAL PARAMETERS:- ~ Output LED Light : High Intensity 30 pieces LED; ~ Power Source : 3 "AA" size battery; ~ Material : PVC; ~ Display Modes Control : Manual "On / Off"; ~ Size : 850L x 460W (mm); ~ Number Of Display Modes : 5; ~ Flash Style : Flashing arrow left, Flashing arrow right, Caution bar, Double arrow, & Corner caution; ~ Extra Features : Embedded magnet for easy "Stick On" on metal, 8 grommets with suction cups for non-metal surfaces, Reflective film build around LEDs for better night visibility ;
Swellable Hydrophillic Waterstop for vertical and horizontal construction joints for cast in-situ concrete structures. It requires no site jointing and suitable for non movement concrete joints.
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint Natural Rubber Waterstops are superior in performance than metal or pvc withstanding shear movements resisting hydrostatic pressure. Flexijoint Natural Rubber Waterstop have greater ultimate elongation of minimum 400% greater than PVC and will continue returning to near original shape after repeated movement. They have lower compression set and perform well at low temperatures. Flexijoint Natural Rubber ( NR ) series Waterstop is moulded from high grade valcanised natural rubber compound and free from reclaimed rubber or vulcanized waste.Flexijoint NR Waterstop widely applied in construction industry. Flexijoint Natural Rubber ( NR ) Waterstop " Dumbell Plain Web " Series.Size 150mm and 230mm width suitable for construction, kicker and partial contraction joints where no shear movement is possible. Flexijoint NR Waterstop Application: Dams, Canals, Culverts, Spillways, Tunnels, Water Towers, Swimming Pools, Reservoirs, Sewerage Tanks, Basements Substructures & Underground Car Parks, Subways, Roof Decks and Podium Areas.
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint Natural Rubber Waterstops are superior in performance than metal and pvc withstanding shear movements resisting hydrostatic pressure. Flexijoint Natural Rubber Waterstop have greater ultimate elongation minimum 400% and will continue returning to near original shape after repeated movement. They have lower compression set and perform well at low temperatures. Flexijoint Natural Rubber ( NR ) series Waterstop is extruded from high grade natural rubber compound and free from reclaimed rubber or vulcanized waste. Flexijoint NR Waterstop widely applied in construction industry. Flexijoint Natural Rubber ( NR ) Waterstop " Centre Blub " Series of 150mm, suitable for subsidence, contraction & expansion joints including high movement joints. Other size 115mm, 230mm and 305mm available upon request. Flexijoint NR Waterstop Application: Dams, Canals, Culverts, Spillways, Tunnels, Water Towers, Swimming Pools, Reservoirs, Sewerage Tanks, Basements Substructures & Underground Car Parks, Subways, Roof Decks and Podium Areas.
Outdoor Polycarbonate Convex Mirror c/w cap / pole bracket and available in 450 / 600/ 800 / 1,000mm diameter in size; Indoor Polycarbonate Convex Mirror is wall mounted and available in 450 & 600mm diameter in size; Polycarbonate Convex Mirror market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia.
